• The Journal of Korea Robotics Society
• /
• v.5 no.1
• /
• pp.14-22
• /
• 2010

Recently researches on the window cleaning robot are being conducted actively. Moving mechanismsof these window cleaning robots are divided into two categories, which are towed type and walking type. Towed type is focused on fast cleaning on the flat surface of building and walking type has priority on cleaning task on relatively complex surface with overcoming obstacles. Currently commercialized towed type window cleaning robot has weakness that it is hard to adhere closely with the wall and easy to be affected by wind. In case of walking type it has the problem that the position errors are continuously accumulated during motion. In this paper, we propose new towed and walking type mechanism which can compensate previous weaknesses. After that we estimate the performance of each proposed mechanism by simulation.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.203-204
• /
• 2017

In case of developing a guide-rail type window cleaning robot, only the first prototype has been developed. In this study, it was considered that the size and the load of the window cleaning robot was not optimized, and through the structural analysis of the self-weight of the window cleaning robot, the stress concentration area was derived and the concentrated stress was quantified. Analysis showed that the upper rail shaft had a bending stress of 9.964Mpa and the bolt had a shear stress of 19.544Mpa. The results of this study will be used as basic data for designing future prototypes.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.272-273
• /
• 2017

As businesses put a greater emphasis on outward appearances, the demand for external window cleaning has been on the rise. However, with the conventional labor-intensive window cleaning method, it is hard to meet this demand. Therefore, this study proposes a Life Cycle Cost (LCC) analysis model for a guiderail-type cleaning robot, and estimate the LCCs of the conventional method and the cleaning robot. The findings of this research are expected to serve as a guide for future development of a cleaning robot.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.255-256
• /
• 2016

In order to overcome the limitation of conventional cleaning method by workers, variety attempts to develop a window cleaning apparatus has been tried. However, the existing cleaning devices were lack of consideration for avoiding projection parts of the window such as frames or profiles. In this study, operating mechanism of cleaning tool for avoiding the projections parts using a two-axis robot is proposed. Proposed mechanism is that a wiper are reposed in a relatively stationary in the vicinity of the projection and avoided the projection in this state. It is expected that the mechanism is the base of driving cleaning tool part in the new window cleaning apparatus.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.2
• /
• pp.161-168
• /
• 2018

Recently, a prototype of a guide rail type window cleaning robot was developed, and is currently undergoing field testing. The size and the load of the robot have not yet been optimized. In this study, a stress analysis was performed to derive quantitative data to improve the current window cleaning robot and secure its structural safety. Through the analysis of its own weight, resistance to wind speed, and other factors, it was found that the robot can be improved in terms of the drooping caused by its own weight and the drag force against wind pressure. The analysis results obtained will be directly applied to improve the design of the window cleaning robot, and it is expected that this will advance the completeness of the robot's design.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.85-86
• /
• 2016

Recently, needs for the window cleaning for 2~5 stories in a building has been increased but existing window cleaning work by workers is not easy to clean the windows. Therefore a demand for development of alternative techniques have been raised. The purpose of this study is to analyze feasibility of development of the guide rail-type cleaning device for cleaning window for the lower stories. For this, we analyze the status of the job, such as risk, limitations of by workers and examine the potential producer needs through interviewing field experts of the cleaning work. Futhermore, we define the required features of the window cleaning device and proposed the validity of the relised device development of the function.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.244-245
• /
• 2019

Recently, a variety of window cleaning devices have been developed. There are, however, few cases of anticipated problems and countermeasures that may arise after these devices are installed. Therefore, in this study, the emergency condition was derived and the emergency scenario was derived for the rail-mounted cleaning device. Emergency scenarios and countermeasures derived from this study will be used for continuous improvement and supplementation of cleaning devices through prototyping and testing.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.138-139
• /
• 2018

The purpose of this study is to analyze the work of the existing manpower dependent cleaning method by investigating the window cleaning site. In this study, detailed work contents were confirmed by on-site investigation and interview with experts, and the relationship, procedure, repetition work, and time required for each work were analyzed. The future analysis results will be used as a basic data for comparative analysis of productivity and economical efficiency with the window cleaning device to be developed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.320-321
• /
• 2018

In the past, the results of window cleaning work have been judged subjective and complaints about cleaning results are being raised. In this study, we tried to quantify the evaluation of the cleaning result. For the quantification of the evaluation, a colorimeter was selected and the basic experiment was carried out. In addition, this study examined the use of standard dust powder for artificial production of contaminants in glasses. Further evaluation and analysis will be carried out to quantify the evaluation criteria of the cleaning results.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.6
• /
• pp.537-543
• /
• 2020

The window cleaning works are manpower-dependent and are performed in an unstable posture at high altitude, so that there is a risk of falling. Therefore, there is an urgent need to improve the safety of workers. In this study, a conceptual design was proposed for the cleaning of exterior windows of a building, and the economic feasibility of the proposed conceptual model was analyzed. The proposed model is designed to avoid protrusions such as window frames, and to be able to respond even if the shapes of the upper and lower parts are different. As a result of analyzing the economic feasibility of the designed conceptual model, the benefit cost ratio was 4.48, which was significantly higher than 1. Therefore, the economic feasibility of the proposed window cleaning device is expected to be sufficient. The results analyzed in this paper will be used in the development and marketing of the window cleaning device.