• 제목/요약/키워드: Wind-tunnel tests

검색결과 444건 처리시간 0.023초

KC-100 항공기 무인화를 위한 운동모델 구축 및 검증 (Development and Validation of Dynamic Model for KC-100 UAS)

  • 김성현;김지본;이정훈;김응태;김병수
    • 항공우주시스템공학회지
    • /
    • 제17권1호
    • /
    • pp.79-87
    • /
    • 2023
  • 항공기의 비행 제어법칙을 설계하기 위해서는 정확한 항공기 운동모델이 요구되며, 이를 구축하기 위한 공력 데이터베이스(DB)를 획득하는 데는 일반적으로 많은 횟수의 풍동시험을 수행해야 한다. 그러나 유인 항공기의 무인화 과정과 같이, 대상 항공기의 비행시험 데이터가 존재하는 경우, 파라미터 추정기법과 DB튜닝 절차를 통해 항공기 운동모델을 획득할 수 있다. 본 논문에서는 KC-100 항공기의 무인화를 위한 비선형 모델 구축 과정 및 검증 방법에 관해 기술한다. 추정기법 적용의 적합성을 판단하는 비행데이터 유효성 분석 과정과 최대공산 추정법을 사용한 선형모델 추정, 그 결과를 활용하는 공력 DB튜닝 과정과 이를 통해 최종 구축된 비선형 모델에 FFS 기준을 적용한 검증 결과를 제시한다.

현수교 세장 내풍 단면의 개발 (Development of Slender Aerodynamic Girder for Suspension Bridges)

  • 권순덕;이명재;조의경;이승호
    • 대한토목학회논문집
    • /
    • 제30권3A호
    • /
    • pp.241-256
    • /
    • 2010
  • 본 연구에서는 변장비 70에 가까운 도전적인 현수교 단면을 개발하는데 목적을 두고 있다. 이를 위하여 먼저 강박스 현수교의 제원을 수집 분석하였다. 그 결과를 보면 강박스 현수교에서 경간장과 형상변수(교폭, 형고, 변장비, 고폭비)는 상관관계가 낮았고 고유진동수와 형상변수의 상관관계도 낮은 것으로 나타났으며, 상관관계가 높은 경간장과 고유진동수 관계는 신뢰구간별 추정식을 제시하였다. 그리고 교폭, 진동수비, 질량, 질량관성모멘트, 수직 및 비틈 고유진동수 변화에 따른 플러터 풍속의 민감도 분석을 실시하였는데, 타 변수보다 비틈 고유진동수가 플러터 풍속에 미치는 영향이 가장 큰 것으로 나타났다. 주경간장 1111 m인 현수교의 내풍 단면을 개발하기 위하여 최소 단면폭과 형고를 제약조건으로 하여 총 30개의 단면에 대한 풍동실험을 실시하고, 이로부터 한계풍속 기준을 충분히 만족하는 단면을 찾았다. 그리고 다중모드 플러터 해석으로 개발한 단면의 내풍안정성을 검증하였다. 본 연구에서 제시한 세장 단면은 향후 장대 현수교 설계시 활용할 수 있을 것으로 판단된다.

An efficient approach for model updating of a large-scale cable-stayed bridge using ambient vibration measurements combined with a hybrid metaheuristic search algorithm

  • Hoa, Tran N.;Khatir, S.;De Roeck, G.;Long, Nguyen N.;Thanh, Bui T.;Wahab, M. Abdel
    • Smart Structures and Systems
    • /
    • 제25권4호
    • /
    • pp.487-499
    • /
    • 2020
  • This paper proposes a novel approach to model updating for a large-scale cable-stayed bridge based on ambient vibration tests coupled with a hybrid metaheuristic search algorithm. Vibration measurements are carried out under excitation sources of passing vehicles and wind. Based on the measured structural dynamic characteristics, a finite element (FE) model is updated. For long-span bridges, ambient vibration test (AVT) is the most effective vibration testing technique because ambient excitation is freely available, whereas a forced vibration test (FVT) requires considerable efforts to install actuators such as shakers to produce measurable responses. Particle swarm optimization (PSO) is a famous metaheuristic algorithm applied successfully in numerous fields over the last decades. However, PSO has big drawbacks that may decrease its efficiency in tackling the optimization problems. A possible drawback of PSO is premature convergence leading to low convergence level, particularly in complicated multi-peak search issues. On the other hand, PSO not only depends crucially on the quality of initial populations, but also it is impossible to improve the quality of new generations. If the positions of initial particles are far from the global best, it may be difficult to seek the best solution. To overcome the drawbacks of PSO, we propose a hybrid algorithm combining GA with an improved PSO (HGAIPSO). Two striking characteristics of HGAIPSO are briefly described as follows: (1) because of possessing crossover and mutation operators, GA is applied to generate the initial elite populations and (2) those populations are then employed to seek the best solution based on the global search capacity of IPSO that can tackle the problem of premature convergence of PSO. The results show that HGAIPSO not only identifies uncertain parameters of the considered bridge accurately, but also outperforms than PSO, improved PSO (IPSO), and a combination of GA and PSO (HGAPSO) in terms of convergence level and accuracy.

풍동실험과 화재실험을 통한 열감지기의 동작특성에 관한 연구 (Study on the Operation Characteristics of Heat Detectors through Fire and Wind Tunnel Experiment)

  • Ryu, Hocheol;Kim, Doohyun
    • 한국재난정보학회 논문집
    • /
    • 제11권2호
    • /
    • pp.203-209
    • /
    • 2015
  • 열감지기는 화재시 발생되는 열을 감지하는 것으로 모든 소방대상물에 일반적으로 사용되는 자동화재탐지설비의 중요한 핵심 요소이다. 열감지기는 스포트(spot)형과 분포형으로 구분되며, 스포트형에는 차동식과 정온식이 있다. 이러한 열감지기는 실제 화재시 작동시간 및 작동온도 등 반응의 민감도에 따라 인명과 재산 손실에 큰 영향을 준다. 국내에서는 스프링클러 헤드제품에 응답시간지수를 도입하여 사용하고 있으나, 열감지기에 대해서는 현재 적용이 되어지지 않고 있으며, 반응의 민감도를 표시하는 응답시간지수의 도입이 필수적으로 본 연구에서는 국내 생산된 정온식 스포트형 열감지기와 다이아프램형 및 반도체 형식의 차동식 스포트형 열감지기에 대하여 풍동실험 및 화재실험을 통하여 응답시간지수, 작동시간, 작동온도 등에 대하여 연구하였다. 응답시간지수를 적용한 열감지기를 설치하여 신속한 경보로 인한 국민의 생명과 재산손실을 줄이는데 도움을 주고자 한다.