• 제목/요약/키워드: Wind pressure

검색결과 1,468건 처리시간 0.03초

하향 분사식 미니스프링클러의 낙수방지 메카니즘과 살수 특성 (Mechanism and Spray Characteristics of a Mini-Sprinkler with Downward Spray for Prevention of Drop Water)

  • 김홍규;정성원
    • 생물환경조절학회지
    • /
    • 제16권3호
    • /
    • pp.210-216
    • /
    • 2007
  • 본 연구는 하향 분사식 미니스프링클러의 낙수방지를 위한 새로운 제안으로 패킹부를 구성하여 패킹과 패킹지지부, 패킹 연결지지체의 메카니즘 분석과 구조 해석을 통하여 패킹부 소재 선정의 타당성을 확인하여 하향 분사식 미니스프링클러의 낙수방지 메카니즘을 개발하고, 제품을 제작하여 살수특성 실험을 수행한 결과는 다음과 같다. 낙수방지를 위하여 삽입되는 패킹부의 재료는 구조해석결과, 압력변화에 대응할 수 있는 재질로서 패킹재는 천연고무(ASTM; NR), 패킹지지체는 폴리프로필렌(PP)이 적합함을 확인하였다. 성능시험 결과, 미니스프링클러의 접속관에 용수를 공급할 때와 중단되는 과정의 대기압과 평형상태에서 선정된 패킹 및 패킹지지체는 압력제어 기능을 정확히 수행하여 낙수가 거의 발생하지 않고, 압력변화에도 민감하게 대응함을 확인하였다. 작용압력별 살수특성 성능을 분석한 결과, 유효살수반경, 유효살수면적, 평균살수심, 최대살수심, 유효최대살수심은 작용압력이 증가함에 따라 모두 증가하는 것으로 나타났다. 살수높이별 살수특성 성능을 분석한 결과, 유효살수반경과 유효살수면적은 살수 높이가 0.2m일 때 가장 낮은 값을, 0.3m일 때 가장 높은 값을 보였고, 그 이상 살수 높이가 높아지면 반대로 감소하였으며, 평균살수심은 살수높이가 높아질수록 감소하였다. 제안된 하향 분사식 미니스프링클러는 패킹부의 영향으로 압력이 증가함에 따라 살수성능이 유연성 있게 변화하여 급격한 변화를 나타내지 않았고, 용수압력이 감소될 때에는 작용압력이 $1.1kgf/cm^2$이상의 범위에서만 살수되었으며, 그 이하에서는 제안된 패킹부에 의해 하향 분사식 미니스프링클러 본체로 공급되는 용수가 차단되어, 대기압과 평형상태에 있는 물의 자중과 중력작용에 의한 자유낙하를 방지함으로서 물방울의 형성 및 낙수 발생의 예방을 확인하였다.}\;10^4\;cell/ml$이던 것이 3 일 후 $138\;{\times}\;10^4\;cell/ml$였고, 실험종료시인 5 일 후에는 $385\;{\times}\;10^4\;cell/ml$로 증식되어 가장 높은 증식률을 보였다. 참굴 D상 유생을 대상으로 먹이효과를 조사한 결과 실험구와 대조구간 유생의 성장 및 생존율에 유의한 차이를 보이지 않았다.C$에서 73.3%, $10^{\circ}C$에서 63.3% 및 $5^{\circ}C$에서 56.7%로 수온이 $30^{\circ}C$ 이내에서는 높을수록 높은 경향을 보였다. 염분에 따른 잠입 실험 결과는 실험 개시 300분 경과 후 염분 30 psu에서 93.3%로 가장 높았고, 35 psu에서 90.0%, 25 psu에서 83.3%, 20 psu에서 60.0%, 15 psu 이하에서는 거의 잠입이 이루어 지지 않았다. 따라서, 적정 살포를 위한 잠입률은 치패의 크기와 상관없이 저질종류는 모래 (75%) + 뻘 (25%), 입자크기는 1 mm 모래에서 높게 나타났다. 공기 중 노출시간은 짧을수록, 수온은 $30^{\circ}C$ 이내에서 높을수록, 염분은 20-35 psu 이내에서 높을수록 잠입률이 높은 경향을 나타내었다. 교수학습모형에 관련된 지식을 묻는 내용으로 주로 출제되었다. 이에 구체적인 개선방안으로 특정 교수학습모형의 이론적 토대가 되고 전체적인 교수설계를 하기 위한 기본 바탕이 될 수 있는 교수학습이론에 관한 내용, 또한 현재가정과교육에 있어서 유용한 교수학습법이라고 입증되고 있는 실천적 추론 가정과 수업에 관한 내용으로의 확대를 제안하였다. 가정과교육평가 문항의 출제는 대다수의 문항이 수행평가에 관한 문항내용으로

포장(圃場)에서 벼 군락(群落)의 미기상(微氣象) 요소(要素)들이 증발산량(蒸發散量)에 미치는 영향(影響) (Influence of Micrometeorological Elements on Evapotranspiration in Rice (Oryza sativa L.) Crop Canopy)

  • 김종욱;강병화;이정택;윤성호;임정남
    • 한국토양비료학회지
    • /
    • 제25권3호
    • /
    • pp.231-241
    • /
    • 1992
  • 벼 군락(群落)의 미기상요소(微氣象要素)들이 증발산(蒸發散)에 미치는 영향(影響)과 그들의 상호관련(相互關聯)을 구명(究明)하고자 1989년(年)에 기상청(氣象廳) 수원기상대(水原氣象臺) 포장(圃場)에서 대청벼와 삼강벼를 공시(供試)하여 종관기상(綜觀氣象), 군락(群落)의 미기상(微氣象)과 증발산량(蒸發散量), 작물(作物)의 건물생산량(乾物生産量) 등을 측정(測定) 조사(調査)하고, 증발산량(蒸發散量)의 생육시기별(生育時期別) 변화(變化)와 기상요소(氣象要素)의 영향(影響)을 검토(檢討)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 벼 군락(群落)의 증발산량(蒸發散量)은 증발계(蒸發計)의 증발량(蒸發量), 기온(氣溫), 일사량(日射量), 일조시수(日照時數), 초관부(草冠部) 상단(上端)의 공기(空氣)와의 포차(飽差), 수온(水溫) 등의 순(順)으로 상관계수(相關係數)가 높았다. 2. 벼 군락(群落)의 증발산량(蒸發散量)과 측정증발량(測定蒸發量)과의 관계(關係)는 소형증발계(小型蒸發計)의 증발량(蒸發量)에 비하여 Class A 증발계(蒸發計)의 증발량(蒸發量)이 더욱 밀접한 상관관계(相關關係)를 보였다. 3. 벼 군락(群落)의 증발산량(蒸發散量)과 증발량(蒸發量)과의 관계(關係)에서 대청벼 보다 삼강벼의 상관계수(相關係數)가 더욱 높은 품종간차이(品種間差異)를 보였다. 4. Class A 증발계(蒸發計)로 측정(測定)된 증발량(蒸發量)에 대한 벼 군락(群落)의 증발산량(蒸發散量)의 비(比)는 전생육기간(全生育期間)을 통(通)하여 1.0이상이었으며, 8월(月) 하순(下旬)에는 1.9로서 최고(最高)에 달하였다. 5. Class A 증발계(蒸發計)의 증발량(蒸發量)은 소형증발계(小型蒸發計)에 의한 측정치(測定値)의 0.719배(倍)이었다. 6. 증발산량(蒸發散量)은 순복사량(純輻射量)보다는 태양(太陽)에너지 복사량(輻射量)과의 상관(相關)이 높았으며, 순복사량(純輻射量)은 태양(太陽)에너지 복사량(輻射量)의 0.66배(倍)이었다. 7. 최고기온(最高氣溫)은 평균기온(平均氣溫)보다 작물(作物)의 증발산량(蒸發散量)과의 상관(相關)이 높았고, 6m 높이의 풍속(風速)과는 정(正)의 상관(相關)을 보였지만, 강우일(降雨日)을 제외한 경우 상대습도(相對濕度)와의 상관계수(相關係數)는 매우 낮았다. 8. 기상요소(氣象要素)를 자료(資料)로 증발산량(蒸發散量)을 추정(推定)하기위하여 작성된 회귀(回歸)모델은 $ET=-5.3594+0.7005_{pan}A+0.1926T_{mean}+0.0878_{sol}+0.025RH$이었고, 이 모델에 의한 추정치(推定値)는 실측치(實測値)와 거의 일치(一致)($R^2=0.607$)하였다.

  • PDF

커튼월에 적용된 구조용 실링재의 옥외폭로와 실내복합열화 처리방법에 따른 내풍압성능 비교연구 (A Study on Comparison of Outdoor Wind Pressure Performance According to Outdoor Exposure and Acceleration Deterioration Methods of Structural Sealants Applied to Curtain Wall)

  • 장필성;홍순구;김성래
    • 한국산학기술학회논문지
    • /
    • 제19권9호
    • /
    • pp.279-287
    • /
    • 2018
  • 실란트는 현대 건축물의 중요한 요소로 사용되고 있으며, 습기, 공기, 기타 물질의 침입에 대한 방벽을 제공함으로서 내후성에 대한 건물 보호의 역할을 한다. 다양한 환경에 노출되어 물리적, 화학적, 기계적 특성이 변화되어 수명이 단축되는 경우가 많으며, UV, 습기, 온도 신축 등은 내구성과 직결되는 중요한 이슈이다. 본 연구에서는 구조용 실링마감재의 내구성능을 실내에서 검증하기 위한 장비로서 외기의 환경을 모사할 수 있는 복합열화시험 챔버를 제작하였다. 황사, 산성비, 미생물에 의한 오염 등 특이 기상 상황의 재현은 어려우며 외기 환경을 100 % 모사하는 것은 불가능한 것으로 판단되며, 구조용 실링재의 옥외폭로시험방법과 복합열화시험장치에 대한 내후성 시험 결과 간의 상관관계를 통해 재현성을 확보하고자 연구하였다. 옥외폭로시험의 변위량 시험 결과 실링재의 응집력이 분해되어 연질화가 진행되는 것으로 판단되었고, 옥외폭로 1년 후 변위는 초기 물성치보다 3600 Pa에서 3배 정도 차이가 나는것을 볼 수 있었고, 비교제품의 경우 최대 7배까지 변위가 차이나는 것으로 확인되었다. 복합열화시험장치에서 변위시험결과 열화되어 탄성 및 인장특성이 감소하는 경향을 나타내었다. 변성실리콘 실링재의 경우는 현재 400 Cycle을 완료하여 옥외폭로 12개월의 물성저하를 확인하였다. 시험체의 변형은 육안으로는 확인할 수 없어 상대적으로 실리콘 실링재 제품보다 상태 안정성이 양호한 것으로 판단된다. 옥외폭로시험 결과, 복합열화시험장치가 체계화되어 관련 지침 또는 규격 등에 제안된다면, 실제 사용환경에서 12개월의 예상수명을 실내에서 3개월 미만에서 검증할 수 있는 방법으로 향후, 경제적 손실저감, 공기단축, 설계에 예상 가능한 재료의 선정 등에 활용될 것으로 기대된다.

북서태평양에서 열대 저기압 발생빈도의 십년간 변동 특성 (Interdecadal Variation of Tropical Cyclone Genesis Frequency over the Western North Pacific)

  • 최기선;김백조;이성로;박종길
    • 한국방재학회 논문집
    • /
    • 제9권6호
    • /
    • pp.31-39
    • /
    • 2009
  • 본 연구에서는 북서태평양상의 기후학적 평균 열대 저기압 발생 자료를 이용하여 이 해역의 북서구역과 남동구역에서의 열대 저기압 발생빈도의 시간변화에서 십년간 변동성을 보이고 반대 위상으로 존재함을 밝혔다. 열대 저기압 발생빈도는 북서구역에서 1980년대 중반 이후부터 최근까지(1986-2005) 증가하는 반면에, 남동구역에서 1951년부터 1970년대 초반(1951-1970)까지 높게 나타났다. 1986-2005년과 1951-1970년 사이의 차이점을 분석한 결과는 다음과 같다. i) 연직바람시어와 해수면 온도의 경우, 1986-2005년 동안에는 북서구역에서, 1951-1970년의 기간에는 남동구역에서 음의 연직시어와 양의 해수면 온도 아노말리를 나타내고 있었다. ii) 열대 저기압 이동빈도를 분석해 본 결과, 북서구역에서 발생한 열대 저기압들 중에서 1986~2005년 동안에는 주로 남중국해에 영향을 주는 빈도가 높았던 반면, 1951-1970년 동안에는 필리핀 동쪽 해상으로부터 동중국해를 지나 한국 및 일본을 통과하는 빈도가 높았다. 남동구역에서 발생한 열대 저기압들의 경우에 대략 $150^{\circ}E$를 기준으로 이동빈도의 공간분포가 동서로 나눠질 수 있다. 1951-1970년 동안의 열대 저기압들은 150oE의 서쪽에서, 1986-2005년 동안의 열대 저기압들은 $150^{\circ}E$의 동쪽에서 주로 이동하는 특성을 보였다. 특히, 1951-1970년 동안에 발생한 열대 저기압들은 필리핀의 동쪽 해상으로부터 남중국해 및 남중국 방향으로 이동하는 빈도가 높았다. iii) 두 기간 사이에 열대 저기압 이동빈도의 이러한 차이는 500 hPa 아노말리 기압패턴에 그 원인이 있다. 특히 1951-1970년 동안에는 동아시아 대륙에 저기압성 순환의 아노말리가 형성되어 필리핀 동쪽해상으로부터 동아시아 해안을 따라 남풍 아노말리가 강화되었다. 이 남풍 아노말리는 열대 저기압이 필리핀 동쪽해상으로부터 동아시아 해안을 따라 이동하기 쉽게 하는 지향류의 역할을 하였다.

설비공학 분야의 최근 연구 동향 : 2012년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research : A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2012)

  • 한화택;이대영;김사량;김현정;최종민;박준석;김수민
    • 설비공학논문집
    • /
    • 제25권6호
    • /
    • pp.346-361
    • /
    • 2013
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2012. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. The conclusions are as follows : (1) The research works on thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and valves, fuel cells and power plants, ground-coupled heat pumps, and general heat and mass transfer systems. Research issues are mainly focused on new and renewable energy systems, such as fuel cells, ocean thermal energy conversion power plants, and ground-coupled heat pump systems. (2) Research works on the heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, and industrial heat exchangers. Researches on heat transfer characteristics included the results for natural convection in a square enclosure with two hot circular cylinders, non-uniform grooved tube considering tube expansion, single-tube annular baffle system, broadcasting LED light with ion wind generator, mechanical property and microstructure of SA213 P92 boiler pipe steel, and flat plate using multiple tripping wires. In the area of pool boiling and condensing heat transfer, researches on the design of a micro-channel heat exchanger for a heat pump, numerical simulation of a heat pump evaporator considering the pressure drop in the distributor and capillary tubes, critical heat flux on a thermoexcel-E enhanced surface, and the performance of a fin-and-tube condenser with non-uniform air distribution and different tube types were actively carried out. In the area of industrial heat exchangers, researches on a plate heat exchanger type dehumidifier, fin-tube heat exchanger, an electric circuit transient analogy model in a vertical closed loop ground heat exchanger, heat transfer characteristics of a double skin window for plant factory, a regenerative heat exchanger depending on its porous structure, and various types of plate heat exchangers were performed. (3) In the field of refrigeration, various studies were executed to improve refrigeration system performance, and to evaluate the applicability of alternative refrigerants and new components. Various topics were presented in the area of refrigeration cycle. Research issues mainly focused on the enhancement of the system performance. In the alternative refrigerant area, studies on CO2, R32/R152a mixture, and R1234yf were performed. Studies on the design and performance analysis of various compressors and evaporator were executed. (4) In building mechanical system research fields, twenty-nine studies were conducted to achieve effective design of mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, renewable energy systems, and lighting systems in buildings. New designs and performance tests using numerical methods and experiments provide useful information and key data, which can improve the energy efficiency of buildings. (5) In the fields of the architectural environment, studies for various purposes, such as indoor environment, building energy, and renewable energy were performed. In particular, building energy-related researches and renewable energy systems have been mainly studied, reflecting interests in global climate change, and efforts to reduce building energy consumption by government and architectural specialists. In addition, many researches have been conducted regarding indoor environments.

한반도 미세먼지 발생과 연관된 대기패턴 그리고 미래 전망 (Atmospheric Circulation Patterns Associated with Particulate Matter over South Korea and Their Future Projection)

  • 이현주;정여민;김선태;이우섭
    • 한국기후변화학회지
    • /
    • 제9권4호
    • /
    • pp.423-433
    • /
    • 2018
  • 본 연구에서는 고농도 미세먼지의 발생과 연관된 대기패턴을 조사하고, 이를 바탕으로 한반도의 고농도 미세먼지의 발생을 예측할 수 있는 지수를 개발하였다. 또한 개발된 지수를 이용하여 미래의 한반도 고농도 미세먼지 발생과 연관된 대기 패턴의 변화를 살펴보았다. 서울지역 미세먼지 농도의 변동성을 조사하기 위해, 황사 발생 사례일을 제외한 미세먼지 고농도 사례일은 대기환경기준에 따라 24시간 평균 $PM_{10}$ 농도가 $100{\mu}g/m^3$ 이상일 경우로 정의하였다. 미세먼지 연평균 농도는 2001년부터 꾸준히 감소하는 경향을 보이며, 2012년 이후에 감소 추세가 주춤하였으며, $PM_{10}$ 고농도 사례일수도 2003년부터 2016년까지 대체로 감소하였다. 그러나 4일 이상 지속되었던 고농도 사례만을 살펴보면 2001년과 2003년을 제외하고 뚜렷한 감소 경향을 찾아보기 어렵고 전반적인 대기질 향상에도 불구하고 지속적으로 발생하는 것을 알 수 있다. 4일이상 지속되는 고농도 사례는 최근 들어 뚜렷한 경향을 보이지 않고, 기상조건 등의 다른 발생원이 있음을 알 수 있다. 그러므로 고농도 사례에 대한 대기 순환장의 특징을 살펴보기 위해 한반도의 고농도 사례일에 대한 대기패턴의 합성장을 분석하였다. 고농도 사례가 발생하였을 경우, 한반도 상공에 고기압에 위치하면서, 극의 찬 공기의 유입을 차단하며, 상층 동서 방향 바람은 한반도 북쪽으로 흐르게 된다. 따라서 한반도 지역은 차고 건조한 북서풍이 약화되고, 풍속이 감소된다. 이러한 한반도 미세먼지 고농도 사례와 연관된 대기패턴을 바탕으로 겨울철 한반도 $PM_{10}$ 농도를 전망하기 위한 미세먼지 고농도 지수를 정의하여 사용하였다. 먼저 500 hPa 지위고도, 500 hPa 동서 방향 바람 성분, 850 hPa 남북 방향 바람 성분과 $PM_{10}$과의 상관성이 높은 지역에서 각 변수를 영역 평균하고 표준화 과정을 거친 후 각 변수에 대한 지수를 계산하고, 각 지수의 합으로 한반도 미세먼지 고농도 지수 (KPI)를 정의하였다. 한반도 미세먼지 고농도 지수를 CMIP5에 참여하는 10개의 기후모형에 적용하여 미래 한반도의 고농도 미세먼지를 발생시킬 수 있는 대기패턴의 변동성을 살펴보았다. 겨울철 한반도에서 대기의 정체를 유발하여 심한 대기오염을 발생시킬 수 있는 기상 조건의 빈도가 기후변화에 따라 크게 증가하는 것으로 나타났다. 이러한 증가는 한반도 주변의 평균 대기 상태의 변화와 일치한다 (Cai et al, 2017). 이 연구는 $PM_{10}$ 관측자료 기간이 2001년부터 2016년까지의 총 16년 동안의 자료 만을 이용하여 한반도 고농도 미세먼지 발생과 관련된 대기패턴을 분석하였기에 대기오염과 연관된 기상조건을 완벽하게 식별하지는 못하였을 것이다. 향후 연구를 통해서 $PM_{10}$과 더불어 $PM_{2.5}$의 자료를 활용하여 상세한 분석이 필요할 것으로 보인다. 그럼에도 불구하고, 본 연구의 결과는 지구 온실가스 배출로 인한 대기 순환의 변화가 한반도 고농도 미세먼지 발생 사례를 증가시키는 중요한 역할을 할 수 있음을 시사한다. 지구 온난화가 심해진다면, 작은 대기 오염 배출이라도 축적이 되어 고농도 미세먼지 현상이 발생 할 수 있다. 따라서 대기 오염 배출 저감 노력뿐만 아니라, 온실가스 배출량을 줄이기 위한 노력이 동시에 필요할 것으로 사료된다.

수증기 연직 분포에 의한 GOCI-II 해색 산출물 오차 분석 (Analysis of Uncertainty in Ocean Color Products by Water Vapor Vertical Profile)

  • 이경상;배수정;이은경;안재현
    • 대한원격탐사학회지
    • /
    • 제39권6_2호
    • /
    • pp.1591-1604
    • /
    • 2023
  • 해색 원격탐사에서 대기 보정은 자료의 정확도와 신뢰성 확보를 위해 반드시 수행해야하는 과정으로 높은 정확도가 요구된다. 또한 최근 원격 탐사 커뮤니티에서는 위성 자료의 오차에 대한 요구 사항이 증가함에 따라 대기 보정의 보조 자료로 사용되는 기상 변수(오존량, 기압, 바람장, 층적분 수증기량[total precipitable water, TPW])의 오차에 의해 발생하는 원격 반사도(remote sensing reflectance, Rrs)의 오차에 대한 연구가 진행되고 있지만 오차 요인으로 알려진 수증기 프로파일의 변동성에 의한 Rrs의 오차에 대한 연구는 수행되지 않았다. 본 연구에서는 Second Simulation of a Satellite Signal Vector version 2.1 모의를 통해 GOCI-II 관측 영역 내의 수증기 프로파일의 변동성에 따른 수증기 투과도의 오차를 계산하고 이로 인해 발생하는 해색 산출물의 오차에 대해 분석하였다. Radiosonde 관측 수증기 프로파일은 그 형태가 복잡할 뿐만 아니라 지표 부근의 큰 변동성으로 인해 기존 GOCI-II 대기 보정에서 사용하고 있는 US standard 62 수증기 프로파일과의 차이가 최대 0.007만큼 발생하였다. 이로 인해 발생한 수증기 투과도의 차이는 GOCI-II 대기 보정에서 에어로졸 반사도 추정의 차이를 발생시키고, 결과적으로 모든 밴드에서 Rrs의 오차가 발생하였다. 하지만 412-555 nm 밴드에서 수증기 프로파일 차이로 인한 Rrs 오차는 요구 정확도보다 낮은 2% 미만으로 나타났으며, 다른 해색 산출물인 클로로필(chlorophyll-a) 농도, 용존 유기물, 총 부유물 농도에서도 유사한 오차를 보이고 있다. 본 연구의 결과는 대기 보정 및 해색 산출물의 정확도에 있어 수증기 프로파일의 차이의 영향이 적다는 것을 의미한다. 하지만 추후 연구에서 수증기 흡광 보정 시 수증기 프로파일의 변동성을 고려할 경우 보다 높은 수준의 Rrs 정확도 확보를 기대할 수 있다.

논벼 장.단간품종의 증발산제계수와 건물량과의 관계에 대한 연구(I) (Studies on Relations between Various Coeffcients of Evapo-Transpiration and Quantities of Dry Matters for Tall-and Short Statured Varieties of Paddy Rice)

  • 류한열;김철기
    • 한국농공학회지
    • /
    • 제16권2호
    • /
    • pp.3361-3394
    • /
    • 1974
  • The purpose of this thesis is to disclose some characteristics of water consumption in relation to the quantities of dry matters through the growing period for two statured varieties of paddy rice which are a tall statured variety and a short one, including the water consumption during seedling period, and to find out the various coefficients of evapotranspiration that are applicable for the water use of an expected yield of the two varieties. PAL-TAL, a tall statured variety, and TONG-lL, a short statured variety were chosen for this investigation. Experiments were performed in two consecutive periods, a seedling period and a paddy field period, In the investigation of seedling period, rectangular galvanized iron evapotranspirometers (91cm${\times}$85cm${\times}$65cm) were set up in a way of two levels (PAL-TAL and TONG-lL varieties) with two replications. A standard fertilization method was applied to all plots. In the experiment of paddy field period, evapotanspiration and evaporation were measured separately. For PAL-TAL variety, the evapotranspiration measurements of 43 plots of rectangular galvanized iron evapotranspirometer (91cm${\times}$85cm${\times}$65cm) and the evaporation measurements of 25 plots of rectangular galvanized iron evaporimeter (91cm${\times}$85cm${\times}$15cm) have been taken for seven years (1966 through 1972), and for TONG-IL variety, the evapotranspiration measurements of 19 plots and the evaporation measurements of 12 plots have been collected for two years (1971 through 1972) with five different fertilization levels. The results obtained from this investigation are summarized as follows: 1. Seedling period 1) The pan evaporation and evapotranspiration during seedling period were proved to have a highly significant correlation to solar radiation, sun shine hours and relative humidity. But they had no significant correlation to average temperature, wind velocity and atmospheric pressure, and were appeared to be negatively correlative to average temperature and wind velocity, and positively correlative to the atmospheric pressure, in a certain period. There was the highest significant correlation between the evapotranspiration and the pan evaporation, beyond all other meteorological factors considered. 2) The evapotranpiration and its coefficient for PAL-TAL variety were 194.5mm and 0.94∼1.21(1.05 in average) respectively, while those for TONG-lL variety were 182.8mm and 0.90∼1.10(0.99 in average) respectively. This indicates that the evapotranspiration for TONG-IL variety was 6.2% less than that for PAL-TAL variety during a seedling period. 3) The evapotranspiration ratio (the ratio of the evapotranspiration to the weight of dry matters) during the seedling period was 599 in average for PAL-TAL variety and 643 for TONG-IL variety. Therefore the ratio for TONG-IL was larger by 44 than that for PAL-TAL variety. 4) The K-values of Blaney and Criddle formula for PAL-TAL variety were 0.78∼1.06 (0.92 in average) and for TONG-lL variety 0.75∼0.97 (0.86 in average). 5) The evapotranspiration coefficient and the K-value of B1aney and Criddle formular for both PAL-TAL and TONG-lL varieties showed a tendency to be increasing, but the evapotranspiration ratio decreasing, with the increase in the weight of dry matters. 2. Paddy field period 1) Correlation between the pan evaporation and the meteorological factors and that between the evapotranspiration and the meteorological factors during paddy field period were almost same as that in case of the seedling period (Ref. to table IV-4 and table IV-5). 2) The plant height, in the same level of the weight of dry matters, for PAL-TAL variety was much larger than that for TONG-IL variety, and also the number of tillers per hill for PAL-TAL variety showed a trend to be larger than that for TONG-IL variety from about 40 days after transplanting. 3) Although there was a tendency that peak of leaf-area-index for TONG-IL variety was a little retarded than that for PAL-TAL variety, it appeared about 60∼80 days after transplanting. The peaks of the evapotranspiration coefficient and the weight of dry matters at each growth stage were overlapped at about the same time and especially in the later stage of growth, the leaf-area-index, the evapotranspiration coefficient and the weight of dry matters for TONG-IL variety showed a tendency to be larger then those for PAL-TAL variety. 4) The evaporation coefficient at each growth stage for TONG-IL and PAL-TALvarieties was decreased and increased with the increase and decrease in the leaf-area-index, and the evaporation coefficient of TONG-IL variety had a little larger value than that of PAL-TAL variety. 5) Meteorological factors (especially pan evaporation) had a considerable influence to the evapotranspiration, the evaporation and the transpiration. Under the same meteorological conditions, the evapotranspiration (ET) showed a increasing logarithmic function of the weight of dry matters (x), while the evaporation (EV) a decreasing logarithmic function of the weight of dry matters; 800kg/10a x 2000kg/10a, ET=al+bl logl0x (bl>0) EV=a2+b2 log10x (a2>0 b2<0) At the base of the weight of total dry matters, the evapotranspiration and the evaporation for TONG-IL variety were larger as much as 0.3∼2.5% and 7.5∼8.3% respectively than those of PAL-TAL variety, while the transpiration for PAL-TAL variety was larger as much as 1.9∼2.4% than that for TONG-IL variety on the contrary. At the base of the weight of rough rices the evapotranspiration and the transpiration for TONG-IL variety were less as much as 3.5% and 8.l∼16.9% respectively than those for PAL-TAL variety and the evaporation for TONG-IL was much larger by 11.6∼14.8% than that for PAL-TAL variety. 6) The evapotranspiration coefficient, the evaporation coefficient and the transpiration coefficient and the transpiration coefficient were affected by the weight of dry matters much more than by the meteorological conditions. The evapotranspiratioa coefficient (ETC) and the evaporation coefficient (EVC) can be related to the weight of dry matters (x) by the following equations: 800kg/10a x 2000kg/10a, ETC=a3+b3 logl0x (b3>0) EVC=a4+b4 log10x (a4>0, b4>0) At the base of the weights of dry matters, 800kg/10a∼2000kg/10a, the evapotranspiration coefficients for TONG-IL variety were 0.968∼1.474 and those for PAL-TAL variety, 0.939∼1.470, the evaporation coefficients for TONG-IL variety were 0.504∼0.331 and those for PAL-TAL variety, 0.469∼0.308, and the transpiration coefficients for TONG-IL variety were 0.464∼1.143 and those for PAL-TAL variety, 0.470∼1.162. 7) The evapotranspiration ratio, the evaporation ratio (the ratio of the evaporation to the weight of dry matters) and the transpiration ratio were highly affected by the meteorological conditions. And under the same meteorological condition, both the evapotranspiration ratio (ETR) and the evaporation ratio (EVR) showed to be a decreasing logarithmic function of the weight of dry matters (x) as follows: 800kg/10a x 2000kg/10a, ETR=a5+b5 logl0x (a5>0, b5<0) EVR=a6+b6 log10x (a6>0 b6<0) In comparison between TONG-IL and PAL-TAL varieties, at the base of the pan evaporation of 343mm and the weight of dry matters of 800∼2000kg/10a, the evapotranspiration ratios for TONG-IL variety were 413∼247, while those for PAL-TAL variety, 404∼250, the evaporation ratios for TONG-IL variety were 197∼38 while those for PAL-TAL variety, 182∼34, and the transpiration ratios for TONG-IL variety were 216∼209 while those for PAL-TAL variety, 222∼216 (Ref. to table IV-23, table IV-25 and table IV-26) 8) The accumulative values of evapotranspiration intensity and transpiration intensity for both PAL-TAL and TONG-IL varieties were almost constant in every climatic year without the affection of the weight of dry matters. Furthermore the evapotranspiration intensity appeared to have more stable at each growth stage. The peaks of the evapotranspiration intensity and transpiration intensity, for both TONG-IL and PAL-TAL varieties, appeared about 60∼70 days after transplanting, and the peak value of the former was 128.8${\pm}$0.7, for TONG-IL variety while that for PAL-TAL variety, 122.8${\pm}$0.3, and the peak value of the latter was 152.2${\pm}$1.0 for TONG-IL variety while that for PAL-TAL variety, 152.7${\pm}$1.9 (Ref.to table IV-27 and table IV-28) 9) The K-value in Blaney & Criddle formula was changed considerably by the meteorological condition (pan evaporation) and related to be a increasing logarithmic function of the weight of dry matters (x) for both PAL-TAL and TONG-L varieties as follows; 800kg/10a x 2000kg/10a, K=a7+b7 logl0x (b7>0) The K-value for TONG-IL variety was a little larger than that for PAL-TAL variety. 10) The peak values of the evapotranspiration coefficient and k-value at each growth stage for both TONG-IL and PAL-TAL varieties showed up about 60∼70 days after transplanting. The peak values of the former at the base of the weights of total dry matters, 800∼2000kg/10a, were 1.14∼1.82 for TONG-IL variety and 1.12∼1.80, for PAL-TAL variety, and at the base of the weights of rough rices, 400∼1000 kg/10a, were 1.11∼1.79 for TONG-IL variety and 1.17∼1.85 for PAL-TAL variety. The peak values of the latter, at the base of the weights of total dry matters, 800∼2000kg/10a, were 0.83∼1.39 for TONG-IL variety and 0.86∼1.36 for PAL-TAL variety and at the base of the weights of rough rices, 400∼1000kg/10a, 0.85∼1.38 for TONG-IL variety and 0.87∼1.40 for PAL-TAL variety (Ref. to table IV-18 and table IV-32) 11) The reasonable and practicable methods that are applicable for calculating the evapotranspiration of paddy rice in our country are to be followed the following priority a) Using the evapotranspiration coefficients based on an expected yield (Ref. to table IV-13 and table IV-18 or Fig. IV-13). b) Making use of the combination method of seasonal evapotranspiration coefficient and evapotranspiration intensity (Ref. to table IV-13 and table IV-27) c) Adopting the combination method of evapotranspiration ratio and evapotranspiration intensity, under the conditions of paddy field having a higher level of expected yield (Ref. to table IV-23 and table IV-27). d) Applying the k-values calculated by Blaney-Criddle formula. only within the limits of the drought year having the pan evaporation of about 450mm during paddy field period as the design year (Ref. to table IV-32 or Fig. IV-22).

  • PDF