• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.435-438
• /
• 2009

Wind speed is measured on the nacelle at the location of wind turbines are installed. The wind speed is transformed to inlet wind speed at the front of hub using newly developed algorithm derived from energy conservation. Wind energy potential is analyzed using the inlet air velocity in the region of Bieung-do wind farm. As results, wind speed depending on the month, yearly averaged wind speed, wind speed distribution, and energy density are showed in this study. Bieung-do area is close to Saemankeum, and the analysis of wind energy potential in Bieung area will be helpful to understand and develop wind energy industry in Saemankeum area.

• Journal of the Korean Solar Energy Society
• /
• v.26 no.4
• /
• pp.31-38
• /
• 2006

The national goal of wind energy dissemination has to be determined rationally based on technically available wind resource potential. For an accurate and scientific estimation of wind resource potential, a wind map is requisite. This paper introduces the national wind map of Korea established by numerical wind simulation. Therefore, quantification of national wind resource potential is now possible and is anticipating to be used as a core index for policy and strategy building of wind energy dissemination and technology development.

• Journal of Environmental Science International
• /
• v.22 no.6
• /
• pp.717-721
• /
• 2013

In order to analyze the effect of environmental protection on wind energy dissemination quantitatively, the onshore wind resource potential is estimated using Environmental Conservation Value Assessment Map and Korea Wind Resource Map. The onshore wind resource potential of 11 GW is calculated if wind farm development is prohibited within Class 1 area of Environmental Conservation Value Assessment plus 500 m buffer area. Therefore it is worried that environmental protection would be a practical barrier of accomplishing 4,155 thousand TOE target of wind energy dissemination until 2030.

• New & Renewable Energy
• /
• v.9 no.4
• /
• pp.13-18
• /
• 2013

Wind turbines should generally be installed at a certain distance from a road to ensure passengers' safety. In Korea, there is no clear guidance as the Ministry of Environment first proposed a road setback distance of 400 m in the Onshore Wind Farm Siting Guidelines draft proposed in July 2012, and then modified it to 1.5 times the height of the wind turbine in October of the same year. This study analyzed the dynamic range of onshore wind resource potential according to how the road setback distance is set using the Korea Wind Atlas with 100m spatial resolution made by the Korea Institute of Energy Research, the transportation network of the Ministry of Construction and Transportation, and the forest road network of the Korea Forestry Service. Owing to the geographical characteristics of Korea, where mountainous terrain accounts for 70% of the total territory, the wind resource potential within 1 km from forest roads are estimated to be 14.3 GW, 14% of Korea's total wind resource potential. In addition, the construction distance of new road for transporting wind turbines from the existing road to a wind farm site is estimated as less than 2 km. Given the limited wind resource potential and geographical constraints, an assessment system that can maximize wind resource utilization and ensure road safety at the same time, and which takes into account the regional characteristics instead of applying the fixed road setback distance across-the-road, is required.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.6
• /
• pp.1-7
• /
• 2008

The wind resource potentials of South Korea are estimated as preliminary stage using the national wind map which has been being established by numerical wind simulation and GIS (Geographical Information System) exclusion analysis. The wind resource potentials are classifying into theoretical, geographical, technical and implementation potentials and the calculation results are verified by comparing to other countries' potentials. In GIS exclusion, urban, road, water body, national parks and steep slope area are excluded from onshore geographical potential while water depth and offshore distance from the shoreline are applied as offshore exclusion conditions. To estimate implementation potential, dissemination records of European countries are adopted which is about 1/8 of geographical potential. The implementation potential of South Korea would correspond 12.5GW which is 1.7 times of the national wind energy dissemination target until 2030.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.307-308
• /
• 2006

The national goal of wind energy dissemination has to be determined rationally based on technically available wind resource potential. For a reliable and scientific estimation or wind resource potential, a wind map is requisite. This paper presents the national wind map of Korea established by numerical wind simulation. Prediction accuracy of the low-resolution wind map is Improved by nudging QuikSCAT data and is validated by comparing with marine buoy beacon and met-mast measurements. Therefore, quantification of national wind resource potential is now possible and is anticipating to be utilized as a core index for policy and strategy building of wind energy dissemination and technology development.

• Journal of Wind Energy
• /
• v.14 no.3
• /
• pp.14-24
• /
• 2023

The significance of renewable energy has been on the rise, as evidenced by the 3020 renewable energy plan and the 2050 carbon neutrality strategy, which seek to advance a low-carbon economy by implementing a power supply strategy centered around renewable energy sources. This study examines the wind resources on the west coast of South Korea and confirms the potential for wind power generation in the area. Wind speed data was collected from 22 automatic weather system stations and four light house automatic weather system stations provided by the Korea Meteorological Administration to evaluate potential sites for wind farms. Weibull distribution was used to analyze the wind data and calculate wind power density. Annual energy production and capacity factors were estimated for 15-20 MW-class large wind turbines through the height correction of observed wind speeds. These findings offer valuable information for selecting wind power generation sites, predicting economic feasibility, and determining optimal equipment capacity for future wind power generation sites in the region.

• Journal of Korean Society of Rural Planning
• /
• v.14 no.2
• /
• pp.25-32
• /
• 2008

Wind energy, which is one of renewable energy, would be useful resources that can be applied to making energy recycling villages without using fossil fuels. This study analyzed energy potential on wind power considering weather condition in three rural villages and compared with energy consumption surveyed. A wind turbine system in the 5kW class can generate 26.1%, 73.9% and 39.5% of the yearly mean consumption of electric power per house in Makhyun, Boojang and Soso respectively. A 750kW wind turbine system can generate 1.7%, 30.3% and 22.1% of the total amount of electric power consumption in three study villages respectively. Wind power energy density was too low in Makhyun and Soso, so it is determined that the application of wind turbine system is almost impossible. Wind energy potential was generally low in Boojang either, but it is evaluated that there is a little possibility of wind power generation relatively. For practical application of renewable energy to rural green-village planning, assessment of energy potential for the local area should be preceded.

• Wind and Structures
• /
• v.31 no.4
• /
• pp.311-319
• /
• 2020

India is a developing nation and heavily spends on the development of wind power plants to meet the national energy demand. The objective of this paper is to investigate wind power potential of Ennore site using wind data collected over a period of two years by three parameter Weibull distribution. The Weibull parameters are estimated using maximum likelihood, least square method and moment method and the accuracy is determined using R² and root mean square error values. The site specific capacity factor is calculated by the mathematical model developed by three parameter Weibull distribution at different hub heights above the ground level. At last, the wind energy economic analysis is carried out using capacity factor at 30 m, 40 m and 50 m height for different wind turbine models. The analysis showed that the site has potential to install utility wind turbines to generate energy at the lowest cost per kilowatt-hour at height of 50 m. This research provides information of wind characteristics of potential sites and helps in selecting suitable wind turbine.

• Journal of the Korean Solar Energy Society
• /
• v.36 no.4
• /
• pp.21-29
• /
• 2016

Commercial wind farm design tools and the national wind map are used to determine the implementation potential of offshore wind power in Korea in this study. For this, the territorial waters of Korea were divided into nine analysis regions and a commercial CFD code was used to obtain wind resource maps at 100m A.S.L. which is the hub height of a 5MW wind turbine used in this study. With the wind resource obtained, factors including water depth, distance from substations, minimum and maximum capacity of a wind farm, distance between turbines and wind farms were considered to determine wind power potential. Also, the conservation areas, military zones, ports, fishing grounds, etc. were considered and excluded. As the result, a total capacity of 6,720 MW was found to be the implementation potential and this corresponds to $3.38MW/km^2$ in API. Also if the distance from the substation is not considered, the potential increased to be 10,040 MW. This offshore wind farm potential is considered enough to satisfy the target of wind farm capacities in the 7th national plan for electricity demand and supply.