• 한국해양공학회지
• /
• 제18권3호
• /
• pp.40-43
• /
• 2004

A rational method is presented for estimating the power increase of a ship at sea. A probabilistic approach is applied to determine the weather condition at sea, A comparison is made between some full-scale data and the result of Swift's method. A comparison is also made to find differences among the results of eight kind methods for the wind added resistance of a VLCC in head wind. The mean difference between the results is 7％, in general, for a given relative wind speed.

• 한국해양공학회지
• /
• 제7권1호
• /
• pp.56-61
• /
• 1993

Standard values in graphic porms are presented for the ratio of added wave resistance to the sun of added wave and wind resistances in head sea for three ship types, tanker, container ship and passenger ship. The effect of ship length on the ratio defined above is investigated for the three ship types. Obique sea added resistance is determined using wave direction reduction factor. The factor is obtained from model test results and cubic spline interpolation technique.

• 한국해양공학회지
• /
• 제34권5호
• /
• pp.294-303
• /
• 2020

This study discusses data collection, calculation of wind and wave-induced resistance, and speed-power analysis of an 8,600 TEU container ship. Data acquisition system of the ship operator was improved to obtain the data necessary for the analysis, which was accomplished using SPA (Ship Performance Analysis, Park et al., 2019) in conformation with ISO15016:2015. From a previous operation profile of the container, the standard operating conditions of mean draft were 12.5 m and 13.6 m, which were defined with the mean stowage configuration of each condition. Model tests, including the load-variation test, were conducted to validate new ship performance and for the speed-power analysis. The major part of the added resistance of container ship is due to the wind. To check the reliability of wind-resistance calculation results, the resistance coefficients, added resistance, and speed-power analysis results using the Fujiwara regression formula (ISO15016:2015) and Computational fluid dynamics (Ryu et al., 2016; Jeon et al., 2017) analysis were compared. Wind speed and direction measured using an anemometer were used for wind-resistance calculation and the wave resistance was calculated using the wave-height and direction-data from weather information. Also, measured water temperature was used to calculate the increase in resistance owing to the deviation in water density. As a result, the SPA analysis using measured data and weather information was proved to be valid and able to identify the ship's resistance propulsion performance. Even with little difference in the air-resistance coefficient value, both methods provide sufficient accuracy for speed-power analysis. The differences were unnoticeable when the speed-power analysis results using each method were compared. Also, speed-power analysis results of the 8,600 TEU container ship in two draft conditions show acceptable trends when compared with the model test results and are also able to show power increase owing to hull fouling and aging. Thus, results of speed-power analysis of the existing 8,600 TEU container ship using the SPA program appropriately exhibit the characteristics of speed-power performance in deal conditions.

• 한국해양공학회지
• /
• 제19권2호
• /
• pp.90-93
• /
• 2005

An improved approximate formula is presented for Series 60 forms, modifying the approximate formula, developed by the Author in 1983. The weather formula is based on interpretations of detailed calculations of speed loss, due to wind(van Berlekom), motions(Maruo), and wave reflection resistance(Kwon). Comparison is made between the result of the approximate formula and the one of detailed calculation. The result of the formula is also compared with some published full-scale data for speed loss.

• 수산해양기술연구
• /
• 제59권4호
• /
• pp.344-353
• /
• 2023

In the actual sea, the additional resistance due to external force such as wind, current and wave is accompanied, and the required power is added in response to these resistance. Especially when the ship is sailing at low speed, the effects of wind and current have a great impact on the safe control of the ship. Likewise, it is thought that the effects of wind and current have a great impact on the trawl ship control since the towing speed of a bottom trawl ship is a low speed of 3 to 4 knots. If the reduce of ship speed and the increase of engine power due to the influence of wind and current can be identified, the safe towing power can be calculated based on a given engine output. Thus, the appropriate size of a fishing gear can be determined. In this study, a total of 20 trawl operations were conducted for seasonal maritime research in the same research area according to the operation mode of propeller. Based on navigation data, trawl fishing data, and engine performance data acquired during the towing fishing gear, and data of ship speed, hull resistance, fishing gear resistance, wind force and current force according to an incidence angle were estimated. The overall power for these loads was calculated and compared with the measured engine power, and the effects of wind force and current force on the engine power were investigated.

• 한국해양환경ㆍ에너지학회지
• /
• 제19권2호
• /
• pp.159-164
• /
• 2016

해상에서 사고선박을 예인할 때 피예인선의 저항을 추정하는 것은 중요한 과정의 하나이다. 피예인선에는 선체 자체의 기본 저항 외에 각종 부가저항이 있는데, 가장 큰 성분중의 하나로 파랑에 의한 부가저항을 들 수 있다. 본 논문에서는 ISO 15016 표준의 이론해석 방법에 의해 사고 선박 예인시 파랑중 부가저항을 추정하는 알고리즘을 정립하고, 이를 전산 프로그램으로 구현하였다. 예제 선박의 계산 결과를 기존의 표준 결과와 비교하였고, 이 알고리즘과 전산 프로그램은 실제로 사고 선박의 저항과 이에 따른 예인력 추정시 사용하기에 적절한 것으로 판단되었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 봄 학술발표회 논문집
• /
• pp.130-135
• /
• 1995

Wind-induced vibration of buildings with viscoelastic dampers are studied analytically. The added viscoelastic dampers change the damping distribution and reduce the response of buildings. The distribution of damping resistance that results from these viscoelastic dampers is known as non-classical or non-proportional. Non-classically damped structures are analyzed by state-space approach. However, this approach is complex and time-consumming compared to classical approach. This paper is aimed at the analysis of wind-induced Vibration Of buildings With Viscoelastic dampers. The Process Of State-Space approach is studied and the approximate analysis is suggested to overcome the complex and time-consuming access. For numerical certification, PSDF(Power Spectral Density Function) is obtained. Autocorrelation function is obtained in time domain and PSDF is obtained by fourier transformation of this function in frequency domain. It is found that Approximate method can give close approximation to exact solution.

• 한국해양공학회지
• /
• 제34권6호
• /
• pp.377-386
• /
• 2020

This paper discusses the effectiveness of onboard measurements and data extracted from weather information for speed-power analysis. Furthermore, validation results of hull and propeller cleaning and painting during dry-docking are discussed. Wind and wave information can be obtained from onboard measurements or weather information from the National Oceanic and Atmospheric Administration (NOAA). The weather information of a specified position and time is extracted from NOAA weather data and compared with onboard measurements. In addition, to validate the effects of hull cleaning and painting during dry-docking, speed-power analysis results of before and after dry-docking are compared. The results show that both onboard measurements and weather information show acceptable reliability when added resistance and speed-power analysis results are compared with each other. Moreover, the ship performance analysis (SPA) software clearly shows the effects of hull cleaning and painting, and it can provide reliable analysis results with either onboard measurements or weather information. In conclusion, it is confirmed that the analysis method and SPA software used in this study are effective in analyzing the ship's speed-power performance.

• 한국해양환경ㆍ에너지학회지
• /
• 제15권2호
• /
• pp.150-155
• /
• 2012

예인선의 주요 목적의 하나는 구난 작업시 다른 선박을 예인하는 것이다. 예인선이 이러한 작업을 안전하게 수행하기 위해서는 적절한 예인력을 가질 수 있어야 한다. 따라서 예인 작업중 피 예인선박에 대한 저항을 추정하는 것은 매우 중요하고도 필수적인 과정이다. 본 논문에서는 예인력을 추정할 수 있는 선박의 저항 계산 프로그램을 연구하였다. 계산 프로그램은 정수중의 기본 선체 저항과 바람, 표류, 선체 표면 거칠기, 파랑, 천수 및 조류에 의한 부가저항을 계산하는 기능을 가지고 있다. 모든 추정값은 도표 또는 수식을 이용하는 통계적이고 경험적인 방법으로 계산된다. 본 프로그램에 의한 계산 결과는 미국 해군의 예인 매뉴얼로부터 계산된 결과와 비교하였다. 그 결과 본 프로그램은 손상 선박의 저항을 적절히 추정할 수 있는 유용한 프로그램이라고 판단된다.

• 한국항해항만학회지
• /
• 제40권3호
• /
• pp.97-103
• /
• 2016

최적의 선박 운항 항로를 찾기 위해서는 선박의 정확한 추진성능을 추정하는 것이 매우 중요하다. 본 논문은 선박 최적운항시스템의 추진성능 데이터베이스를 생성하기 위한 전산프로그램의 개발에 대해 기술하고 있다. 실해역에서의 추진성능은 표류와 표면 거칠기 등 선체 상태뿐 만 아니라 파랑과 바람 등 해상 상태의 영향을 받는다. 이 부가저항 추정 방법들은 ISO 15016:2002 표준의 실선 속력시운전 해석법을 근간으로 하고 있으며, 추가로 바람과 선체 표면 거칠기에 대한 몇 가지 추정 방법이 보완되었다. 이 추정 방법들은 종합적인 전산프로그램으로 만들어졌다. 그리고 향후 최적 운항경로 계산에 활용될 쇄빙연구선 아라온 호에 대해서 데이터베이스 계산이 수행되었다. 이 프로그램은 모든 선박의 항로 최적화 계산에 유용하게 사용될 수 있을 것으로 판단된다.