• Design & Manufacturing
• /
• 제9권3호
• /
• pp.24-28
• /
• 2015

Speaking in general terms the form injection process can be described as a new process-variant of already known structural foam molding technology which roots go back to the early sixties. The most limiting factors of already know foaming processes are large cell size and the lack of uniformity of these cells as well and the inability to foam all kinds of plastic materials. In this paper, Process Study on weight change in injection rate during foaming. Experimental conditions were set as the injection speed 50,150,300 and 450 mm/s. The experiments PA, PA+GF, PP, was confirmed that the weight increase to PP+TA.

• 생약학회지
• /
• 제25권2호
• /
• pp.178-187
• /
• 1994

Korean folk medicine 'Jin Hae Cho' has been used as a remedy for neuralgia and an invigorating drug after a childbirth in Korea. The botanical origin of the crude drug has been no pharmacognostical confirmation on it. To clarify the botanical origin of 'Jin Hae Cho', studied on the morphological and anatomical characteristics of the roots of Potentilla species growing wild in Korea i.e. Potentilla chinensis Ser., P. cryptotaeniae Maxim., P. dickinsii Fr. et Sav., P. discolor Bunge, P. fragarioides L. var. major Maxim., P. freyniana Bornm., P. kleiniana Wight et Arnott, P. paradoxa Nutt., P. yokusaiana Makino and 'Jin Hae Cho' from Korea on Korean market. As a result, it was made clear that 'Jin Hae Cho' from Korea was derived from the roots of Potentilla chinensis Ser. and Potentilla discolor Bunge.

• 한국수소및신에너지학회논문집
• /
• 제28권3호
• /
• pp.246-251
• /
• 2017

To fabricate a hydrocarbon polymer electrolyte composite membrane incorporated with Pt nanoparticle, the polymer electrolyte membrane made of a sulfonated-fluorinated hydrophilic-hydrophobic block copolymer (SFBC) and sulfonated poly (ether ether ketone) (SPEEK) blend in the wight ratio of 1 : 1 was synthesized, and a simple drying process was used in order to incorporate Pt nanoparticle into the SFBC/SPEEK film by reducing platinum (II) bis (acetylacetonate), Pt $(acac)_2$. The distribution of the Pt nanoparticles was observed by transmission electron microscopy (TEM), and mechanical and thermal properties were tested by universal testing machine (UTM) and thermogravimetry analyzer (TGA). Cation conductivity, ion exchange capacity (IEC) and I-V characteristics were estimated.

• Journal of Microbiology
• /
• 제39권4호
• /
• pp.338-342
• /
• 2001

Pseudomonas fluorescens SM11 is a naphthalene-degrading strain whose dissimilatory genes are cho-mosomally encoded. We have cloned the 2.9 kb Sal I fragment harboring genes for the naphthalene-degrading upper pathway. The nucleotide sequences were determined to be nahQ, napA, and partial regions of nahE genes. The nahQ encods a protein of 188 amino acid residues with a deduced molec-ular wight of 20.8kDa. The high homology with other proteins suggests that NAhQ may be an active and useful protein whtich gives as selective advantage to naphthalene degradatin. Transposase(TnpA)encodes a polypetide chain with a molecular mass of 41.8kDa consisting of 376 amino acid residues. The deduced anino acid sequence of tnpA revealed 96% idenitity with putative transposase of P. stutzeri OX1,. It was assumed that transposase plays an important role in the evloution of the catabloic-path way in the regulation of nah expression.

• International Journal of Aeronautical and Space Sciences
• /
• 제9권1호
• /
• pp.31-41
• /
• 2008

This paper deals with the energy saving problem of the follower aircraft in the loose leader-follower formation geometry in which the lateral separation between formation members is more than a wingspan of the leader aircraft. This formation geometry offers no drag benefit, but has a strategic advantage. In the case of loose formation flight, the follower aircraft usually consumes more energy than the leader aircraft because the follower aircraft should use more thrust to maintain given formation geometry, especially during the turning phase from the outside of the leader"s flight path or join-up phase. A formation control scheme based on the energy maneuverability is proposed in this paper. To design the proposed control law, the velocity command is designed using feedback linearization for the horizontal formation geometry and then coverts it to the altitude command using the energy equation. Numerical simulation is performed to verify the effectiveness of the proposed controller.

• 국제초고층학회논문집
• /
• 제9권1호
• /
• pp.17-41
• /
• 2020

In Part One, I documented the evolution of the use of the elevator and the iron frame to build ever-taller buildings that would eventually be called "skyscrapers," to offset the ever-increasing cost of Manhattan real estate. By the start of the Great Depression of the 1870s in 1873, New York architects had erected two ten-storied skyscrapers. In Part Two I document the major events, designers, and buildings in New York, Chicago, and other American cities that eventually culminated in the ability to erect 20 story skyscrapers by 1890.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.391-394
• /
• 2005

A theoretical model was developed to predict the shear strength of slender reinforced concrete beams. The shear force applied to a cross-section of the beam was assumed to be resisted primarily by the compressive zone of intact concrete rather than by the tensile zone. The shear capacity of the cross section was defined based on the material failure criteria of concrete: failure controlled by compression and failure controlled by tension. In the evaluation of the shear capacity, interaction with the normal stresses developed by the flexural moment in the cross section was considered. In the proposed strength model, the shear strength of the beam and the location of the critical section were determined at the intersection between the shear capacity and shear demand curves. The proposed strength model was verified by the comparisons to prior experimental results.

• 한국안전학회지
• /
• 제20권3호
• /
• pp.158-163
• /
• 2005

This paper is focusing on the model to predict the ultimate shear strength on joints of composite system (RCS) with reinforced concrete columns and steel beams considering the transverse beam. It reviews the ratio of experimental shear strength to design strength calculated by existing desist equations which are proposed by Kanno, Wight, Noguchi and the rising of strength by the transverse beams. When the shear strength of joints is estimated, it is necessary to do research work for the stress transfer mechanism considering two concrete strut of inner and outer panel by web of the transverse beam. In order to confirm it requires further experimental and analytical study.

• Archives of Pharmacal Research
• /
• 제13권4호
• /
• pp.379-381
• /
• 1990

The effect of calcium gluconate on estrogen (estradiol) serum level as well as follicle stimulating hormone level was studied. Our results revealed that oral administration of calcium gluconate (100 mg/kg body wight) to adult non-pregnant female rabbits caused a significant increase of serum levels of estradiol and follicle stimulating hormone. On the other hand, oral contraceptive (Norminest tablets) decreased significantly follicle stimulating hormone serum level, while combined administration of calcium gluconate and oral contraceptive caused significant increase of serum level of follicle stimulating hormone compared with control values. Also, concurrent administration of calcium gluconate and Norminest tablet increased significantly the rate of conception compared with group recieved Norminest tablets only. These results indicated that combined administration of calcium and oral contraceptives must be cautiously.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.157-158
• /
• 2020

In order to calculate construction costs properly, it is necessary to add the weight that reflects different worksite conditions. The implementation of the weight, however, is difficult because it is impossible to determine whether wight should be added in basic work or whether weight values are overlapped. Special worksite conditions further complicate the matter. Furthermore, overlapping implementation of weight values result in overestimation of construction costs. The current study clearly analyzed the weight value items in the current construction cost calculation standards, and analyzed the weight value items included under the basic productivity category to propose an improvement of weight standards. Basically, the estimating standards provide 140 weight value items, with different levels of weight given to each item. Among 1,333 items in the estimating standards, 140 include weight values. Some items have two types of weight values.