• International Journal of High-Rise Buildings
• /
• v.9 no.4
• /
• pp.361-368
• /
• 2020

The authors developed a new type of steel slit shear wall (SSSW) having the function of structural condition assessment through visually inspecting the out-of-plane deformation of the designed tapered links subjected to lateral deformation. To facilitate its practical application, this paper studies how to design dimensions of the tapered links. Two parameters, the width-to-thickness ratio of the tapered links and steel yield stress, were studied. The performance of structural condition assessment was affected by both parameters with the width-to-thickness ratio being the controlling one. Through both numerical and experimental study, the designed width-to-thickness ratio of tapered links for different levels of structural condition assessment was established considering the effect of different steel grades used. In practice, the dimensions of tapered links can be determined following the design equation provided. Finally, a design procedure for the proposed SSSW system is provided.

• Archives of Plastic Surgery
• /
• v.36 no.6
• /
• pp.784-787
• /
• 2009

Purpose: Reduction mammaplasty is one of the most commonly performed operations in plastic surgery. Although secondary surgery is occasionally required for minor aesthetic problems or for treatment of the complications of the primary surgery, there are no clear operative guidelines of management. We report here two cases of secondary reduction mammaplasty using differrent pedicle from the initial ones. Methods: One case of secondary reduction mammaplasty were performed using medial pedicle after central (19 years) pedicle reduction mammaplasty because of subsequent breast ptosis and asymmetry. The other case were performed using medial pedicle after superior (4 years) pedicle reduction mammaplasty with contralateral immediate breast reconstruction with TRAM flap because of subsequent breast ptosis and asymmetry. Care was taken to include sufficient width of pedicle and adequate soft tissue attachment beneath the nipple - areolar complex. Results: There was no significant complication such as nipple - areolar necrosis or fat necrosis. The results were well maintained throughout the follow - up period. Conclusion: Medial pedicle reduction mammaplasty can be safely performed after central or superior pedicle reduction mammaplasty when sufficient width of pedicle and adequate soft tissue attachment beneath the nipple - areolar complex are maintained.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.297-298
• /
• 2007

• Journal of the Korean Home Economics Association
• /
• v.42 no.8
• /
• pp.203-218
• /
• 2004

Recently, knitted materials are used more often than ever before in fashion. Therefore it is necessary to study their application into garment patterns. The purpose of this study was to develop a system by which the tensile property of knitted fabrics can be applied. In this study, 5 different distribution methods of tensile property were tested on 2 sample fabrics which have a lower and higher tensile property than moderate-stretch. The subjects were five women within an age range from 18 to 24 who showed average body figures. The major findings derived from this investigation were as follows; The 4th method was regarded as the most valid. The 4th method was fixed proportional alteration based on the reduction amount of bust girth, i.e. front (back) width and shoulder width reduced by 60％ of the bust girth reduction and neck point reduced by 28％ of the bust girth reduction. When the reduction was based on the proportion of the actual measurements, the alteration was too severe, so that the armhole curve was changed into a very uncomfortable curve.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.389-390
• /
• 2008

The dependence of $f_T$ and $f_{max}$ on the unit finger width is measured and analyzed for $0.13{\mu}m$ MOSFETs. The increase of $f_T$ at narrow width is attributed by the parasitic gate-bulk capacitance, and the decrease of $f_T$ at wide width is generated by the reduction of increasing rate of $g_{mo}$. The increase of $f_{max}$ at narrow width is originated from the abrupt reduction of gate resistance due to the non-quasi-static effect. These analysis results will be valuable information for layout optimization to improve $f_T$ and $f_{max}$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.243-247
• /
• 2015

The characteristics of the fluid force reduction of a square prism having a small triangular prism at the upstream side was investigated by measuring of lift and drag on the square prism The experimental parameters were the width ratios (H/B=0.2~0.6) of triangular prisms to the prism width and the gap ratios (G/B=0~3) between the square prism and the triangular prism. The drag reduction rate of the square prism was increased and then decreased with G/B in case of the same H/B, and was increased with H/B in case of the same G/B. The maximum drag reduction rate was represented by 78.5% at H/B=0.6 and G/B=1.5. The lift reduction rate of the square prism was hardly not affected by the width and gaps ratios, the average value was about 52.4%.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.1
• /
• pp.30-36
• /
• 2014

BACKGROUND: Best management practices are often implemented to control nonpoint source pollutants. Best management practices need to be simulated and analyzed for effective Best management practices implementations. Filter strip is one of effective Best management practices in agricultural areas. METHODS AND RESULTS: Soil and Water Assessment Tool model was selected to explore the effectiveness of filter strip to control total phosphorous in Golji watershed. Soil and Water Assessment Tool model was calibrated for flow and total phosphorous by Sequential Uncertainty Fittin ver.2 algorithm provided in Soil and Water Assessment Tool-Calibration and Uncertainty Procedures. Three scenarios defined by filter strip width were applied. The filter strip width of 5 m was able to reduce the most amount of total phosphorous. In other words, the total phosphorous reduction by filter strip of 5 m was 28.0%, while the reduction was 17.5% by filter strip of 1 m. However, the reduction per unit filter strip width were 17.4%, 8.0%, and 4.5% for 1 m, 3 m, and 5 m of filter strips, respectively. CONCLUSION: Best management practices need to be simulated and analyzed so that the BMP scenario can be cost-effective. A large size of BMP might be able to control large amount of pollutants, however it would not be indicated as a cost-effective strategy.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.2
• /
• pp.110-116
• /
• 2011

The current study investigated the friction property of angle and width effect for micro-scale grooved crosshatch pattern on SKD11 steel surface against bearing steel using pin-on-disk type. The samples fabricated by photolithography process and then these are carry out the electrochemical etching process. We discuss the friction property due to the influence of a hatched-angle and a width of groove on contact surface. We could be explained the lubrication mechanism for a Stribeck curve. So It was found that the friction coefficient depend on an angle of the crosshatch on contact surface. It was thus verified that micro-scale crosshatch grooved pattern could affect the friction reduction. Also, it is play an important a width of groove to be improved the friction property. I was found that friction property has a relationship between a width and an angle for micro-grooved pattern.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.127-130
• /
• 2007

Effect of the forging process parameters on the void crushing is the cogging process has been studied in order to find the most effective factor. The Process parameters used for this study are die width ratio, reduction ratio and pre-cooling time before cogging process. Void crushing analysis about the selected process parameters was carried out using FE analysis. The results of FE analysis were evaluated by Taguchi method. It was found that the efficiency of void crushing increases with an increase in the values of all selected process parameters and the principal factor controlling the void crushing was identified as the reduction ratio.

• Transactions of Materials Processing
• /
• v.16 no.7
• /
• pp.502-508
• /
• 2007

Effect of the process parameters of the cogging process on the void crushing has been studied in order to identify the most effective factor. The process parameters considered in this study are die width ratio, reduction ratio and pre-cooling time before cogging process. Void crushing analysis with the selected process parameters was carried out using FE analysis. The results of FE analysis were evaluated by Taguchi method. It was found that the efficiency of void crushing increases with an increase in the values of all selected process parameters and the principal factor controlling the void crushing was identified as the reduction ratio.