• Applied Microscopy
• /
• 제25권2호
• /
• pp.29-38
• /
• 1995

The fine structure of the hemocytes in Wolf spider, Pardosa astrigera, is discribed and compared with that of similar cells in other spider species and insects. Five hemocyte types are identified in the hemolymph: prohemocyte, plasmatocyte, granulocyte, spherulocyte and adipohemocyte. Prohemocytes are small with a relatively undifferentiated cytoplasm. The nucleus is comparatively large and has a perinuclear space. Plasmatocytes and granulocytes are pinocytotic function in the hemolymph of the body. The plasmatocytes have some coated pits on the plasma membrane and well developed Golgi complex, The granulocytes appear sequence of events in the formation of coated vesicle from a coated pit on its plasma membrane. Golgi complex become well expressed and give rise to small secretory vesicles which fuse to large bodies. The spherulocytes are larger in cell size than other hemocytes. Their cytoplasm is filled with spherules. The spherules contain the floccurent materials and the helical structured materials, which are 220nm in length and 80nm in width. The adipohemocytes are oval shaped and have a number of lipid droplets.

• 한국정밀공학회지
• /
• 제23권11호
• /
• pp.34-41
• /
• 2006

Nanoimprint lithography is an emerging technology which has an ability to make patterns under 100nm width. Recently many researches have been focused to develop multilayer patterning function in nanoimprint lithography and aligning method is attracting attention as a key technology. $Moir\'{e}$ has been used widely to measure dislocation or deformation of objects and considered one of the best solutions to detect aligning error in nanoimprint lithography. Concentric circular patterns are used to generate a $moir\'{e}$ fringe in this paper and aligning offset and direction are extracted from it. Especially this paper shows the difference of fringe equation of $moir\'{e}$ which can be obtained in nanoimprint process atmosphere from normal one.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.309-313
• /
• 1990

Pulse width modulation using discontinuous conduction modes are applied to a full-bridge series resonant converter to regulate the output from no load to full load with low switching loss and a narrow range of frequency variation. Finally, a simple nonlinear discrete-time dynamic model for this proposed converter is derived using approximation. This discrete time model is linearized and a general input - output transfer function for the propelled converter is derived.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.219-223
• /
• 2001

The on-line cure monitoring during the cure process of composite materials is important for better quality and productivity. The dielectric sensor for cure monitoring consists of base film and electrodes. Because the characteristic of dielectric sensor for the on-line cure monitoring is dependent on the base material, width and number of electrode, etc, the dielectric sensor should be standardized. And the selection of base film material of sensor is very important. In order to prevent the measuring errors generated from the increase of environmental temperature, the base film material should have stable dielectric constant with respect to environmental temperature. In this study, the newly developed dielectric sensor for cure monitoring was designed and the dissipation factor which is function of degree of cure was measured using the sensor. The relationship between the dissipation factor and degree of cure with respect to environmental temperature was investigated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.519-524
• /
• 2001

These days, $Al_[2}O_{3}$ ceramic use all over the industry because dynamic function and special properties to compare traditional material. But $Al_[2}O_{3}$ ceramic is high hardness and brittleness materials. For this reason, it is very difficult to process. Therefor, In this paper, it was investigated that laser process parameter, which can produce appropriate quality of $Al_[2}O_{3}$ ceramic microhole machining utilized Nd:YAG laser and Excimer laser.

• 대한기계학회논문집B
• /
• 제31권8호
• /
• pp.711-717
• /
• 2007

Shape optimization of a staggered herringbone groove micromixer using three-dimensional Navier-Stokes analysis has been carried using Kriging model. The analysis of the degree of mixing is performed by the calculation of spatial data statistics. The calculation of the variance of the mass fraction at various nodes on a plane in the channel is used to quantify mixing. A numerical optimization technique with Kriging model is applied to optimize the shape of the grooves on a single wall of the channel. Three design variables, namely, the ratio of groove width to groove pitch, the ratio of the groove depth to channel height ratio and the angle of the groove, are selected for optimization. A mixing index is used as the objective function. The results of the optimization show that the mixing is very sensitive to the shape of the groove which can be used in controlling mixing in microdevices.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.173-180
• /
• 2004

This paper presents the effect of varying boundary conditions such as ground subsidence, internal pressure and temperature variation for buried pipelines on failure prediction by using a failure probability model. The first order Taylor series expansion of the limit state function incorporating with von-Mises failure criteria is used in order to estimate the probability of failure mainly associated with three cases of ground subsidence. Using stresses on the buried pipelines, we estimate the probability of pipelines with von-Mises failure criterion. The effects of varying random variables such as pipe diameter, internal pressure, temperature, settlement width, load for unit length of pipelines, material yield stress and pipe thickness on the failure probability of the buried pipelines are systematically studied by using a failure probability model for the pipeline crossing ground subsidence regions which have different soil properties.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1406-1409
• /
• 2004

The Resolver usually used in industry is the absolute angle analog sensor that must be in order to driving BLDC (brushless DC) motor, and it needs RDC(Resolver-to-Digital converter) for changing the output signal to digital to be applied to the SVPWM(Space Vector Pulse Width Modulation) algorithm. Commonly used S/W RDC needs trigonometric function. What it takes a lot of calculation time of processor is gotten at weak point. In this paper, S/W RDC is realized except trigonometric functions as a result of feedback resolver outputs after filtering using FIR filter. thus, processing time is reduced. So, One-chip DSP Controller operating the Vector Control, RDC, and SVPWM can be designed.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1407-1414
• /
• 2016

Unlike existing pulse-width modulation (PWM) techniques, such as sinusoidal PWM and random PWM, the wavelet PWM (WPWM) technique based on a Harr wavelet function can achieve a high fundamental component for the output voltage, low total harmonic distortion, and simple digital implementation. However, the original WPWM method lacks output voltage control. Thus, the practical application of the WPWM technique is limited. This study proposes an improved WPWM technique that can regulate output voltage amplitude with the addition of a parameter. The relationship between the additional parameter and the output voltage amplitude is analyzed in detail. Experimental results verify that the improved WPWM exhibits output voltage control in addition to all the merits of the WPWM technique.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.789-791
• /
• 1998

Numerical simulation has been performed on a microtip field emitter structure produced by employing a CMP technology. The field distributions are estimated by using a Maxwell 2D vector simulator and the electron trajectories are obtained by solving the equation of ballistic motion of emitted electrons. The beam width observed at the phosphor has been characterized as a function of the applied voltages and the gate-to-tip distance. It has also been investigated how the electron trajectory is changed by adopting the anode switching as well as the focus electrode.