• 전력전자학회논문지
• /
• 제20권5호
• /
• pp.421-428
• /
• 2015

An advanced direct torque control (DTC) with pulse width modulation (PWM) method is presented in this paper. The duty ratio calculation of the selected voltage vector is based on the voltage functions of the selected voltage vector according to the sector angle. The proposed DTC uses a conventional DTC scheme with six sector divisions and switching rules. However, the winding voltages are supplied by the PWM approach. Furthermore, the duty ratio of the switching voltage vector is determined by the flux, torque error, and motor speed. The base voltage that shall determine the duty ratio can be calculated by approximate voltage functions according to the voltage angle. For the calculation of base voltages, second-order quadratic functions are used to express the output voltage of the selected voltage vector according to voltage angle. The coefficients for the second-order quadratic functions are selected by the voltage vector, which is determined by the switching rules of the DTC. In addition, the voltage functions are calculated by the coefficients and voltage angle between the voltage vector and rotor position. The switching voltages from the calculated duty ratio can supply the proper torque and flux to reduce the ripple and error. The proposed control scheme is verified through practical experimental comparisons.

• 자원환경지질
• /
• 제27권6호
• /
• pp.549-556
• /
• 1994

Geochemical studies on gold-bearing quartz veins and wallrocks from the Okgye mine were carried out in order to investigate the primary dispersion patterns of gold and associated elements and to quantify the dispersion width of elements with distance from the gold-bearing quartz veins. Gold-bearing quartz veins occur in basaltic trachyandesite of unknown age. Enrichment of $k_2O$, MnO, Au, As, Rb, Sb, Pb, Zn, Cu, Ag and Cd, and depletion of $Na_2O$ and Sr are found in altered wallrocks. The ratio of $k_2O(k_2O+Na_2O)$, alteration index for trace elements, and Rb/Sr in altered wallrocks are increased, whereas Sr/CaO ratio is decreased with approach to the gold-bearing quartz veins. The widths of primary dispersion range from 17 cm to 155 cm. The relative dispersion width increases in order Au=Cu=Zn=Ag=Cd$k_2O$=Rb and Ba< $Na_2O$ $Na_2O$, As, Sb, Sr, Pb, Au, Cu, Zn, Ag and Cd, and a quadratic function for $k_2O$, MnO, Rb and Ba.

• Current Optics and Photonics
• /
• 제6권3호
• /
• pp.244-251
• /
• 2022

We introduce a spectral reconstruction method to enhance the spectral resolution in a static modulated Fourier-transform spectrometer. The optical-path difference and the interferogram in the focal plane, as well as the relationship of the interferogram and the spectrum, are discussed. Additionally, for better spectral reconstruction, applications of phase-error correction and apodization are considered. As a result, the transfer function of the spectrometer is calculated, and then the spectrum is reconstructed based on the relationship between the transfer function and the interferogram. The spectrometer comprises a modified Sagnac interferometer. The spectral reconstruction is conducted with a source with central wave number of 6,451 cm^-1 and spectral width of 337 cm^-1. In a conventional Fourier-transform method the best spectral resolution is 27 cm^-1, but by means of the spectral reconstruction method the spectral resolution improved to 8.7 cm^-1, without changing the interferometric structure. Compared to a conventional Fourier-transform method, the spectral width in the reconstructed spectrum is narrower by 20 cm^-1, and closer to the reference spectrum. The proposed method allows high performance for static modulated Fourier-transform spectrometers.

• 구강회복응용과학지
• /
• 제35권4호
• /
• pp.214-219
• /
• 2019

목적: 본 연구의 목적은 상악과 하악의 완전 무치악 환자에서 보철물로 상실된 치열궁 폭경 재건을 위한 기준을 제시하기 위하여 과두간 폭경에 대한 상악 제1대구치간 폭경의 상관관계를 평가하기 위함이다. 연구 재료 및 방법: 콘빔형 전산화단층영상(Cone-beam CT)을 촬영한 환자 중, 본 연구의 기준에 부합하는 한국인 120명(남성 60명, 여성 60명)을 선택하였으며 Invivo 5.1을 이용해 Cone-beam CT scan을 분석하였다. 축의 방향설정 후, 상악 제1대구치의 근심 협측 교두정간 거리를 측정하였으며, 과두간 폭경은 각 과두의 중심점을 지정하여 측정하였다. 수집된 자료는 SPSS Version 20.0으로 분석하였고, Pearson의 상관분석을 이용하여 과두간 폭경과 상악 제1대구치간 폭경의 상관관계의 통계적 유의성을 검증하였다. 결과: 한국인의 평균 과두간 폭경은 105.9 mm였으며, 남성이 108.3 mm 여성이 103.4 mm였다. 평균 상악 제1대구치간 폭경은 57.1 mm였으며, 남성이 57.9 mm 여성이 56.2 mm였다. 과두간 폭경과 상악 제1대구치간 폭경에 대한 Pearson의 상관분석 결과, 0.614의 Pearson 상관계수로 통계적으로 유의한 양의 상관관계를 보였다. 결론: 과두간 폭경과 상악 제1대구치간 폭경은 양의 상관관계를 보였으며, 한국인의 과두간 폭경과 상악 제1대구치간폭경의 평균 비율은 1:0.54를 보였다. 본 제한된 연구의 결과를 근거로 상악과 하악의 완전 무치악 환자에서 과두간 폭경을 본래의 상악 치열궁 폭경 설정을 위한 가이드로서 사용이 가능할 것이다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.213-219
• /
• 2003

As the 2-D hydraulic experimental results for the submerged rubble-mound structure, we have concerned with their stability/function characteristics of structures by the effects of wave force, scour/deposition at the toe and wave transmission ratio at the lee-side sea. And as to investigate the variation characteristics of wave transmission ratio which depended to a geometrical structure of the submerged breakwater profiles, the critical conditions for the depth of submergence and crest width obviously presented. In summary, there results lead us to the conclusions that the wave control capabilities of submerged breakwaters by the variation of the submergence depth is high about 4 time degrees at the efficiency than the that of crest width. The destruction of covering block at the crest generated at the region which located between maximum damage curve, it maximum damage/failure station from the toe of the structure were 0.2L. As the wave transmission coefficient and the slope of the structure increase, the damage/failure ratio and the maximum scour depth at the toe was extended, respectively. When maximum scour depth happened. The destruction of covering block which located at the toe generated at the front slope destruction. Finally, it was found from the results that the optimization of structure may be obtained by the efficiently decision of the submergence depth and crest width in the permissible range of wave transmission ratio.

• 생물환경조절학회지
• /
• 제7권4호
• /
• pp.290-297
• /
• 1998

겨울철 온실의 기본적인 열에너지원인 일사를 최대한 확보하도록 하는 은실의 지붕형상을 결정하기 위해 유전알고리즘 및 광투과율 전산모델을 이용한 최적화기법을 이용하여 설치지역, 피복재료특성, 온실의 기본치수등이 주어졌을 때 지붕경사각, 경간폭비의 최적조합을 결정할 수 있도록 하는 최적설계를 수행하였다. 수원지방에 위치한 경간폭 6m의 2연동 동서동 온실 및 단동 온실을 가정하여 최적화를 수행한 결과 경사각, 폭비 순으로 2연동, 단동 온실에 대해 각각 40.861≒40 $_。 / , 0.4806≒0.5, 37.490≒37 $_。 / , 0.7748≒0.78의 결과를 얻을 수 있었다. 광투과율 문제를 예로 적용해 본 결과 직접 전산모델을 호출하여 최적화를 수행하는 유전알고리즘의 기법은 온실환경의 해석을 위해 연구되어온 다양한 분야의 전산모델들을 종합적인 온실의 최적설계에 활용하도록 하는데 유용한 기법이 될 것으로 판단되었다.판단되었다.

• 한국의류산업학회지
• /
• 제13권6호
• /
• pp.926-933
• /
• 2011

The purpose of this research was to develop a smart wear equipped with wearable technologies for women in the age of 50's and 60's and confirm its acceptability. For this, we constructed a casual jacket that has the integration of heating and lighting function, and evaluated the user's satisfaction. The size of the heating device attached at the back of the jacket was 300 mm in width and 120 mm in length and the size of the one attached at the front abdomen was 180 mm in width and 120 mm in length. The power supplier was the unification of the battery and controller which have been waterproofed. The lighting device connected with LED was 26mm in width, 20 mm in length and 1.5 mm in thickness. It has been designed in a waterproofed rectangular shape and was attachable to the jacket. The satisfaction survey of a smart jacket has been conducted with three standards, which were convenience, appearance and practicality. Free physical movement among the standard of convenience had very high scores with the average of 4.7 on a five point-scale. The acceptability of the jacket was 4.6, which proved that it didn't have unique feelings compared to ordinary ones. The evaluation score of the appearance of the jacket was 4.5. Especially inside finishing of the jacket received the highest scores from all ages. According to the evaluation of practicality, there has been no change in the appearance of the jacket and the function of heating device after laundry.

• Archives of Plastic Surgery
• /
• 제35권2호
• /
• pp.187-192
• /
• 2008

Purpose: Generally speaking, most of Korean have smaller eyes than those of Caucasian and they have epicanthus with narrow palpebral fissure. It makes external appearance looking dull because the length of the palpebral fissure is short and there is a epicanthus. In case the function of the levator muscle is weak, their eyes look much smaller. Epicanthus and weak levator muscle function make the eyes look dull. The above mentioned, authors want to introduce double eyelid operation, epicanthoplasty, levator plication to extend and lengthen the palpebral fissure. Methods: From August 2001 to August 2004, there were 138 cases that had double eyelid operation with epicanthoplasty or levator plication. the 69 cases of them had double eyelid operation and epicanthoplasty, the 33 cases of them had double eyelid operation and levator plication and the 36 cases of them had double eyelid operation and epicanthoplasty and levator plication. Results: After the operation, the length and height of the eyelid are improved remarkably, and most of the patients were satisfied. The length of the eyelid is improved 3 to 5mm($3.4{\pm}0.5mm$) in case of the epicanthoplasty, the width of the eyelid is improved 3 to 4mm($3.1{\pm}0.3mm$) by the levator plication. The length of the eyelid is improved 3 to 5($3.4{\pm}0.4mm$) and the width is improved 2 to 4mm($2.9{\pm}0.5mm$) by the epicanthoplasty used levator plication. Conclusion: The improvement of the eyelid length is almost the same as epicanthoplasty and levator plication are done simultaneously. But the improvement of the eyelid width is less shorter when epicanthoplasty and levator plication are done simultaneously than the case of levator plication alone. This is because there is a tension influencing on the limitation of widening palpebral fissure to fix the epicanthal tendon. This method is recommendable for the patients who want to have much bigger eyes.

• 한국전자통신학회논문지
• /
• 제15권4호
• /
• pp.637-642
• /
• 2020

본 연구는 S대역 또는 X대역 레이다 보다 빔폭이 상대적으로 큰 저주파 대역을 사용하는 초단파 레이다의 SLB/BLB 설계 및 구현에 대한 연구이다. 초단파 대역의 안테나는 빔폭이 상대적으로 크기 때문에 부엽에서 반사된 표적 신호를 처리하지 않으면 주엽 신호에서 들어온 것으로 인식하여 레이다의 탐지 오경보율이 증가한다. 부엽 차단 방법은 배열 안테나의 중앙쪽 복사소자를 사용하여 배열안테나 전면부의 부엽 신호를 차단하고, 뒤쪽에서 들어오는 신호는 BLB 수신안테나 조립체를 통해 차단시킨다. 레이다 구현을 완료하여 모의 신호 발생장치를 활용한 시스템 단위의 부엽 신호 차단에 대한 시험을 통하여 SLB/BLB 신호가 제거되는 것을 시험을 통하여 확인하였다. 본 연구를 통하여 향후 안테나 크기 및 빔폭이 큰 저주파 대역 레이다용 배열안테나의 부엽 차단 기술 구현에 활용할 예정이다.

• 한국추진공학회지
• /
• 제11권3호
• /
• pp.35-42
• /
• 2007

로켓 엔진의 음향 불안정을 제어하기 위해 모형 연소실에 배플형 분사기가 장착된 경우의 음향 감쇠 특성을 수치해석적으로 조사하였다. 기존에 보고된 배플형 분사기의 효용성을 확인하였고 분사기간 간극이 존재할 때 음향 감쇠 효과가 증대되는 메커니즘을 규명하였다. 여러 가지 크기의 간극에 따라 음향학적 감쇠능력을 조사하였고, 본 연소실에서는 0.1 mm 정도의 간극에서 최적의 감쇠능력을 가짐을 알 수 있었다. 음향 감쇠 효과가 증대되는 메커니즘을 규명하기 위해, 분사기 사이의 간극에 따른 에너지 소산율과 와도를 계산하였고, 소산율 변화 추이와 감쇠인자 변화 추이가 유사함을 알았다. 이를 통해, 간극에 의한 에너지 소산의 종대로 음향 감쇠 효과가 증가함을 알았다.