• ETRI Journal
• /
• v.41 no.3
• /
• pp.289-297
• /
• 2019

In this paper, a wideband, circularly polarized patch antenna is proposed that leverages the unidirectional resonant modes of a circular patch mounted on top of a grounded dielectric-ferrite substrate. The proposed antenna is fed via the proximity coupling method and several parasitically coupled patches are placed on a dielectric superstrate to enhance the impedance bandwidth of the antenna. The resonant modes of the structure rotate only in the clockwise or counter clockwise directions. In the frequency range where the effective permeability of the ferrite layer is negative, the resonance frequencies of these modes differ significantly, which produces a large axial ratio (AR) bandwidth. For the proposed antenna, the numerical results show the 10 dB impedance bandwidth to be around 44% and the 3 dB axial ratio bandwidth to be higher than 64%.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.6
• /
• pp.473-478
• /
• 2021

This paper designed a wideband, high gain planar trapezoidal monopole antenna using backside frequency selective surface (FSS) according to the need for wideband and high gain antenna required in various fields such as rapidly increasing wireless communication, autonomous vehicles, 5G wireless communication and wideband applications. The proposed antenna uses a dual metallic to have a structural difference from the existing FSS. By solving the complexity of the design antenna using genetic algorithms (GA) and high frequency structural simulators (HFSS) simulations, the proposed antenna is not only produce a high efficiency but also presents a wide bandwidth of 3.52 to 5.92 GHz and a gain of 10.5 dBi over the entire bandwidth, with the highest gain of 11.8 dBi at 5.1 GHz. It has been confirmed that the gain increased 8.6 dBi as the 36% impedance bandwidth of 1.8 GHz compared to the existing antenna improved to the 50% impedance bandwidth of 2.4 GHz.

• Journal of Advanced Navigation Technology
• /
• v.27 no.5
• /
• pp.629-634
• /
• 2023

In this paper, the design of a miniaturized wideband tapered slot antenna using slots combining various types of fan-shaped structures was studied. To miniaturize the tapered slot antenna and make it operate at low frequencies, slots combining fan-shaped structures were added to the ground plane of the tapered slot antenna. The miniaturization design process of the final proposed antenna was systematically explained by comparing the input reflection coefficient and gain variations when each fan-shaped structure was appended, compared to when there was no slot. The proposed miniaturized wideband tapered slot antenna using slots combining the fan-shaped structures was fabricated on an RF-35 substrate and its measured characteristics were compared with the simulation results. Experiment results show that the frequency band with a voltage standing wave ratio (VSWR) less than 2 was 2.59-11.39 GHz, and gain within the band was measured to be 3.3-7.0 dBi. The proposed miniaturized wideband tapered slot antenna can be reduced in size by 36.9%, compared to when there are no slots in the ground plane.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2003-2008
• /
• 2013

In this paper, a design method for a ultra-wideband printed semi-circular-shaped dipole antenna operating in the band of 1-15 GHz is studied. The effects of the gap between the two arms of the semi-circular-shaped dipole and the radius of the semi-circle on the input reflection coefficient and gain characteristics are examined to obtain the optimal design parameters. The optimized printed semi-circular-shaped dipole antenna is fabricated on an FR4 substrate and the experimental results show that the antenna has a desired extremely wideband characteristic with a frequency band of 1-15 GHz (175%) for a VSWR < 2.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.83-84
• /
• 2016

A wideband stacked patch antenna with parasitic elements, rectangular and triangle shaped patches, is proposed. Two different shaped parasitic elements are placed in the above of main rectangular microstrip patch antenna in order to achieve wide bandwidth for 860 MHz band. Coupling between the main patch and parasitic patches is realized by thick air gap. The gap and locations of parasitic patches are found to be the main factor of the wideband impedance matching. The proposed antenna is designed on a ground plane with small size of $119mm{\times}109mm$ for application of compact transceivers. And the impedance bandwidth of the antenna should satisfied CDMA band to the 780MHz~890MHz.

• ETRI Journal
• /
• v.27 no.4
• /
• pp.453-456
• /
• 2005

The ultra-wideband (UWB) signal radiation process in an antenna is different from that of a narrowband signal. In this paper, we study the degradation of the desired signal component according to the antenna structure and location of a receiver in a bipolar time-hopping UWB system. And we propose a receiver structure with an adaptive template waveform generator to compensate for the degradation caused by a realistic TX-RX antenna system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.207-213
• /
• 2008

A simplified design procedure for quasi-Yagi antenna arrays using an ultra-wideband balun is presented. The proposed antenna design procedure is based on the simple impedance matching among antenna components: i.e., balun, feed, and antenna This new broadband and high gain antenna array is possible due to the ultra-wideband performance of the balun. As design examples, wideband $1\times4$ and $1\times8$ quasi-Yagi antenna arrays are successfully designed and implemented in Ku-band with frequency bandwidths of about 50 % and antenna gains of 9$\sim$10 dBi and 11$\sim$12 dBi, respectively. And the simulated and measured results demonstrate wide bandwidths and good radiation properties. These antenna arrays can be applied to various phased-array and spatial power combining systems.

• ETRI Journal
• /
• v.37 no.1
• /
• pp.26-31
• /
• 2015

Axial-ratio (AR) bandwidth enhancement is achieved for a circularly polarized (CP) cylindrical dielectric resonator antenna (DRA) using a wideband hybrid coupler (WHC) combined with dual probe feed. The presented WHC, comprised of a Wilkinson power divider and a wideband $90^{\circ}$ shifter, delivers good characteristics in terms of 3 dB power splitting and consistent $90^{\circ}$ (${\pm}5^{\circ}$) phase shifting over a wide bandwidth. In turn, the proposed CP DRA, for the employment of the WHC, in place of conventional designs, provides a significant enhancement on AR bandwidth and impedance matching. The antenna prototype with the WHC exhibits a 3 dB AR bandwidth of 48.66%, an impedance bandwidth of 52.5% for voltage standing wave ratio (VSWR) ${\leq}2$, and a bandwidth of 44.66% for a gain of no less than 3 dBi. Experiments demonstrate that the proposed WHC is suitable for broadband CP DRA design.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1489-1491
• /
• 2004

PD in air is accompanied by light, sound and electromagnetic wave. Light and sound can be prevented from blocking between PD sources and sensor but electromagnetic wave can be transferred to long distance without any interference an captured by antenna. This paper investigated the wideband antenna is appropriate for sensing Partial discharge in air. PD was generated from simulated PD source which consist of needle and flat electrode with small gap. Signals obtained from wideband antenna were diminished in both time and frequence region with the distance between PD source and antenna.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.286-289
• /
• 2003

In this paper, the performance of W-CDMA system with smart antenna is analyzed for angular spread in spatio-temporal wideband vector channel. We consider correlation between any two elements of antenna array, the angle spread of multipath, and structure of antenna array in this channel model. And each multipath is assumed as a reflective wave from only one direction. Several multipaths within one chip are distinguished into each one and the strongest signal is selected. As a result, the performance of the W-CDMA system with smart antenna in spatio-temporal wideband vector channel has been considerably improved in proportion to the increase of angular spread.