• 제목/요약/키워드: Wide-bandgap transparent conductive oxide

검색결과 2건 처리시간 0.019초

Field Assisted Method of Producing Wide-bandgap Transparent Conductive Electrodes for Deep Ultra-violet Light Emitting Diodes Prepared by Magnetron Sputtering

  • 김석원;김수진;김희동;김경헌;박주현;이병룡;우기영;김태근
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.331-331
    • /
    • 2014
  • 3족 질화물에 기반한 발광다이오드는 비소화물이나 인화물에 비해 여러 가지 장점을 가져 각광받아왔다. 특히, (Al)GaN 에 기반한 자외선 영역 발광 다이오드는 자외선 경화, 소독 등의 여러 가지 응용 가능성을 가진다 [1]. 하지만, 심자외선 영역으로 갈수록 높은 접촉 저항과 투명전극에서의 광흡수에 의해 전류주입 효율과 광추출 효율이 감소하여 결국 외부양자 효율이 더욱 열화되는 특성을 보인다. 이는 넓은 밴드갭을 가지는 물질을 이용하여 p-(Al)GaN 층에서 오믹접촉을 이루어야만 해결이 가능하지만 아직까지 이러한 결과가 보고된 바 없다. 본 연구에서는, 우리는 넓은 밴드갭을 가지는 silicon dioxide (SiO2) 에 전기장을 인가하여 p-GaN, and p-AlGaN 층에 전도성 필라멘트를 형성하여 전기전도도를 부여하는 연구를 진행하였다. p-GaN 과 p-AlGaN 위에서 5 nm 두께의 SiO2는 schottky 한 특성과 280 nm의 파장대역에서 약 97%의 투과율을 보였다. 비록 schottky 장벽이 형성되었지만, 전기전도도가 크게 향상되었으며 심자외선 영역에서 매우 낮은 흡수율을 보였다. 이는 기존의 증착후 열처리를 거쳐 제조된 전극에 비하여 우수한 특성을 지니며 향후 심자외선 영역 발광다이오드의 p-(Al)GaN 층 위에 오믹접촉을 이룰수 있는 가능성을 제시한다.

  • PDF

RF 마그네트론 스퍼터링을 이용한 p 타입 투명전도 산화물 SrCu2O2 박막의 제조 (Fabrication of P-type Transparent Oxide Semiconductor SrCu2O2 Thin Films by RF Magnetron Sputtering)

  • 석혜원;김세기;이현석;임태영;황종희;최덕균
    • 한국재료학회지
    • /
    • 제20권12호
    • /
    • pp.676-680
    • /
    • 2010
  • Most TCOs such as ITO, AZO(Al-doped ZnO), FTO(F-doped $SnO_2$) etc., which have been widely used in LCD, touch panel, solar cell, and organic LEDs etc. as transparent electrode material reveal n-type conductivity. But in order to realize transparent circuit, transparent p-n junction, and introduction of transparent p-type materials are prerequisite. Additional prerequisite condition is optical transparency in visible spectral region. Oxide based materials usually have a wide optical bandgap more than ~3.0 eV. In this study, single-phase transparent semiconductor of $SrCu_2O_2$, which shows p-type conductivity, have been synthesized by 2-step solid state reaction at $950^{\circ}C$ under $N_2$ atmosphere, and single-phase $SrCu_2O_2$ thin films of p-type TCOs have been deposited by RF magnetron sputtering on alkali-free glass substrate from single-phase target at $500^{\circ}C$, 1% $H_2$/(Ar + $H_2$) atmosphere. 3% $H_2$/(Ar + $H_2$) resulted in formation of second phases. Hall measurements confirmed the p-type nature of the fabricated $SrCu_2O_2$ thin films. The electrical conductivity, mobility of carrier and carrier density $5.27{\times}10^{-2}S/cm$, $2.2cm^2$/Vs, $1.53{\times}10^{17}/cm^3$ a room temperature, respectively. Transmittance and optical band-gap of the $SrCu_2O_2$ thin films revealed 62% at 550 nm and 3.28 eV. The electrical and optical properties of the obtained $SrCu_2O_2$ thin films deposited by RF magnetron sputtering were compared with those deposited by PLD and e-beam.