• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.898-900
• /
• 2001

In general, the accuracy of the switching angles is dependent upon the resolution of the encoder and the sampling period of the microprocessor. But the region of high speed, switching angles are fluctuated back and forth from the preset values, which are cause by the sampling period of the microprocessor. Therefore, the low cost linear encoder suitable for the practical and stable SRM drive is proposed and the control algorithm to provide the switching signals using the simple analog type switching logic circuit is also presented in this paper.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.582-584
• /
• 2006

This paper describes a monocular PSD-based motion capture sensor to employ with commercial video game systems such as Microsoft's XBOX and Sony's Playstation II. The system compact, low-cost, and only requires a one-time calibration at the factory. The system includes a PSD(Position Sensitive Detector) and active infrared (IR) LED markers that are placed on the object to be tracked. The PSD sensor is placed in the focal plane of a wide-angle lens. The micro-controller calculates the 3D position of the markers using only the measured intensity and 2D position on the PSD. A series of experiments were performed to evaluate the performance of our prototype system. From the experimental results we see that the proposed system's compact size, low-cost, ease of installation, and high frame rates are suitable for high speed motion tracking in games.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.371-372
• /
• 2006

Poly(${\varepsilon}-caprolactone$) (PCL) is a highly crystalline polymer that is miscible with several amorphous polymers including chlorinated polyether, poly(vinylchloride), poly(hydroxyether) and Bisphenol A polycarbonate. The crystallization behavior of miscible blend of amorphous/crystalline polymers has widely been studied. Generally a depression of the crystallization ability has been found with addition of amorphous component because of the reduction of chain mobility, the change of free energy of nucleation as a result of a specific interaction, and so on [1]. In this work, for the first time, the blend of PCL and copolymer of polyurethane containing polycaprolactone as a soft segment is considered. The structural similarity of TPU soft segment with PCL affects on formation of the miscible component and crystallization behavior of PCL in the blend. This has been studied using differential scanning calorimetry (DSC) and Wide-angle X-ray Scattering (WAXS).

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1997년도 춘계학술대회논문집
• /
• pp.297-303
• /
• 1997

This study was initiated to investigate suitability of men's dress shoe sizes made for young men. Experiments were performed on 172 men for 19 to 29 years of age. Nine dimensions were measured from the subject's right foot and 11 dimensions were measrued from the outline of the foot. The data were analyzed for six different groups. The subjects were grouped by their dress shoe size or the ratio of the foot width to foot length. The result of the experiments lead to the following conclusions: 1. Foot length, metatarsal width and heel width were significantly different among the small, medium and large dress shoe size groups. 2. No significant differences in front foot angle and the inside metatarsal width were found among the above three groups. 3. The difference between wearing shoe size and the foot length was larger for the subjects with wide foot shape.

• 전자공학회논문지
• /
• 제50권7호
• /
• pp.231-235
• /
• 2013

Lens distortions have a significant impact on captured or projected image geometry. This paper proposes a lens distortion correction with gradient components for wide-angle lenses. In most cases, distortion coefficients are estimated using a distortion model by point correspondences. Corrected images using only point correspondences can be compensated excessively, therefore, producing bended lines into the opposite direction near the corners. To curtail these phenomena, we propose to adopt the gradient components in addition to positions to obtain the distortion coefficients. We verified the improved accuracy and the straightness of the proposed method through experimentation.

• 천문학논총
• /
• 제13권1호
• /
• pp.17-30
• /
• 1998

To study kinematics of solar prominences, we have made Ha spectrographic study of an eruptive prominence which appeared on the 27th of August, 1992 with a position angle of 270 deg. The observation was carried out by a Littrow type spectrograph and a G1 CCD camera attached to the 25cm coronagraph at Norikura Coronal Station. In taking the spectral data the slit was placed in parallel to the solar limb at 7 different heights, each being separated by 5 arcsec with a time step of 30 sec. The observed eruptive prominence shows a wide range of line of sight Doppler velocity, spanning from $V_{dopp}=-17.5km/s\;to\;V_{dopp}=58.2km/s$. It is also found that the velocity increases with height at the rate of ${\Delta}V= 0.86 km/s/arcsec$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1645-1648
• /
• 2008

We successfully fabricated lowest-cost superior perform ance MVA LCDs with highest-yield, high transmission, high contrast-ratio, and wide viewing angle. Using the amplified intrinsic fringe field (AIFF) controlled MVA invented by Ong, we eliminated all protrusions and ITO slit geometries. We further achieved: (1) faster gray-gray response times without the over-drive technology, (2) faster tough mura, and (3) lower flicker and cross-talk in the row inversion driving schemes.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.581-586
• /
• 2003

The objective of this study is to evaluate the injection performance of crack repair method in concrete structure. To improve the quality of the concrete structure caulking material was injected into the crack of building that were planned to be demolished and injection properties of various repair method were compared and assessed according to type of crack. Results from the test showed that when cracks and injection port were integrated and the injection port wasn't blocked repair material was able to be injected even below around 40㎏/㎠ pressure. Moreover, effective pressure each type of packer showed wide range varying from 200-400㎏/㎠. As for drill method for injection port, core drill method has shown to be more effective compared to the air pump method

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1998년도 추계학술대회논문집:21세기에 대비한 지능형 통합항만관리
• /
• pp.201-209
• /
• 1998

The propagation of water waves over irregular bottom bathymetry and around islands involves many process. In this study of numerical model is developed current in water of varying depth. The method used is splitting method and minimax approximation. This numerical method used is Crank-Nicolson scheme. This model is applied to Vincent shoal and compared with laboratory data. The results agreed well with laboratory data. The results agreed well with laboratory data. Current effect is considered in this study. So, the model is used for the estimation of rip current in the slowly varying topography.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.646-649
• /
• 2011

본 논문에서는 멀티-카메라 뷰 주차 보조 시스템을 위한 프로토타입을 제안한다. 제안한 시스템은 운전자에게 세방향의 차량 주변의 영상을 제공한다. 평행주차나 주차장에서 사각지역을 줄이고, 편안하고 안전한 주행을 위해 핸들 조정에 따라 와이드 앵글의 CCD 카메라 영상을 출력한다. 제안한 시스템은 차량 실험을 통해 성능을 확인하였다.