• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.11
• /
• pp.1527-1530
• /
• 2002

Factor analysis was applied to the phenotypic correlation matrix of 15 linear type traits (scored linearly 1 to 50 points) for 2035 Holstein cows of 38 sires computed from data collected between 1988 and 1992 in Beijing Shuangqiao Farm and Beijing Xijiao Farm. The 15 linear type traits were stature, body strength, body depth, dairy form, rump angle, rump length, rump width, rear leg side view, foot angle, fore udder attachment, rear udder height, rear udder width, udder cleft, udder depth and teat placement rear view. The first four components accounted for 49.1% of the total variance in type scores. Factor 1 reflected strong cows, with deep bodies, with long and wide rumps, and tall in stature. Factor 2 reflected cows with well attached fore udders, wide rear udders and whose udders were supported by strong suspensory ligaments with close teat placement. Factor 3 reflected cows with good dairyness, sickled in the hocks, high rear udders and udder floors above the hocks. Factor 4 reflected cows with sloping rumps from hooks to pins and with steep foot angle. Principal component and factor analyses are useful to clarify the relationships among type traits.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.510-514
• /
• 1994

This paper deals with an application of neural network to camera calibration with wide angle lens and 2-D range finding. Wide angle lens has an advantage of having wide view angles for mobile environment recognition ans robot eye in hand system. But, it has severe radial distortion. Multilayer neural network is used for the calibration of the camera considering lens distortion, and is trained it by error back-propagation method. MLP can map between camera image plane and plane the made by structured light. In experiments, Calibration of camers was executed with calibration chart which was printed by using laser printer with 300 d.p.i. resolution. High distortion lens, COSMICAR 4.2mm, was used to see whether the neural network could effectively calibrate camera distortion. 2-D range of several objects well be measured with laser range finding system composed of camera, frame grabber and laser structured light. The performance of 3-D range finding system was evaluated through experiments and analysis of the results.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.4
• /
• pp.61-68
• /
• 2007

Two experiments examined the visual memory distortion by presenting 170 subjects with wide-angle views of four scenes on monitor screen. Retention interval of 0, 1 and 48 hours tested in reproduction and recognition experiment. The results of reproduction showed that the subjects tend to magnify the foreground and background of scenes compared to the real input (scene) for all retention intervals. The viewers recognized mure wide-angle views for the same scenes at the retention interval of 1 and 48 hours. These results demonstrated boundary extension is not a robust and unidirectional phenomenon but boundary contraction can be occurred with wide-angle views. The results also suggested that boundary contraction is the product of the activation of a memory schema hypothesis: In memory the representation moves toward a prototypical view and prototypical object size.

• Journal of the Optical Society of Korea
• /
• v.12 no.2
• /
• pp.79-87
• /
• 2008

We have developed a miniature fisheye lens with $190^{\circ}$ field of view operating simultaneously in the visible and the near infrared wavelengths. The modulation transfer function characteristic for the visible wavelength is sufficient for a mega-pixel-grade image sensor. The lens also has a fair resolution in the infrared wavelength region. The calibrated $f-{\theta}$ distortion is less than 5%, and the relative illumination is over 90%. In consequence, a sharp wide-angle image can be obtained which is uniform in brightness over the entire range of field angles. The real image heights for the visible and the near infrared wavelengths have been fitted to polynomial functions of incidence angle with sub-pixel accuracies. Combined with the near equidistance projection scheme of the lens, this lens can be advantageously employed in various image-processing applications requiring a wide-angle lens.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1501-1504
• /
• 2006

The WV film successfully enlarged the field of view of the TN mode and made TN popular for larger size applications such as PC monitors. The hybrid alignment of the PDM (polymerized discotic material) layer is also suited for the OCB mode, which is promising as a nextgeneration LCD-TV because of fast panel response and a wide viewing angle. This paper describes recent technological progress in WV films, especially for OCB.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.2
• /
• pp.201-206
• /
• 2004

We have performed computer simulation and experiment to obtain electro-optic characteristics of reflective hybrid aligned nematic (R-HAN) cell driven by fringe field, in which the cell consists of polarizer, optical compensation film, LC layer and reflector. Conventional R-HAN cell driven by fringe field using only the LC layer shows high wavelength dispersion at dark-state and thus viewing angle characteristic is strongly wavelength-dependent. In order to improve this demerit, we added one optical compensation film to conventional R-HAN cell. The display with optimized cell parameters shows low wavelength dispersion at dark-state and exhibits a wide viewing angle without the occurrence of grey scale inversion over a wide range of viewing angles and the contrast ratio greater than 5 over exists about 120$^{\circ}$ in vortical direction and 160$^{\circ}$in horizontal direction. Experimental results show good agreements with theoretical results and fast response time.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1645-1648
• /
• 2008

We successfully fabricated lowest-cost superior perform ance MVA LCDs with highest-yield, high transmission, high contrast-ratio, and wide viewing angle. Using the amplified intrinsic fringe field (AIFF) controlled MVA invented by Ong, we eliminated all protrusions and ITO slit geometries. We further achieved: (1) faster gray-gray response times without the over-drive technology, (2) faster tough mura, and (3) lower flicker and cross-talk in the row inversion driving schemes.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06b
• /
• pp.292-294
• /
• 2006

현재 대다수의 자동차에 장착된 사이드미러와 백미러 같은 기존의 비젼 시스템은 사각지대(blind spot)를 가지고 있다. 이러한 단점을 보안하기 위해 고급 자동차에는 후방에 wide-angle 카메라를 장착하고 있다. 기존의 wide-angie 카메라 시스템은 1대의 카메라를 사용하여 후방 영상을 얻고 그것을 그대로 보여줌으로서 어느 정도 사각지대를 줄여주는 역할을 하고 있지만 여전히 확보되지 않은 사각지대가 존재한다. 하지만 다수의 카메라를 사용하면 보다 넓은 후방 시야를 확보함으로서 보다 완벽하게 사각지대를 제거할 뿐만 아니라, 좀 더 다양한 위험물 정보를 주행 중에도 운전자에게 제공하는 것이 가능해진다. 본 논문에서는 사각지대를 제거하기 위해 차량의 좌. 우측 그리고 후방에 장착된 카메라를 통해 얻어진 영상물 하나의 통합된 파노라마 영상물 생성하는 방법을 제안하고 몇 가지 경우에 대해 실험한다. 우리는 3D 와핑을 통해 각 영상의 Bird's Eye View를 생성하고, 생성된 Bird's Eye View를 2차원 이동변환만을 이용해서 하나의 통합된 Bird's Eye View를 만든다. 이렇게 만들어진 통합된 영상을 후방 카메라를 기준으로 다시 3D 와핑 함으로서 완전한 파노라마 영상을 생성한다.

• Advances in Automotive Engineering
• /
• v.1 no.1
• /
• pp.143-152
• /
• 2018

In this study an economical image stitching algorithm for use in automotive industry is developed for retrofittable panoramic image assistance applications. The aim of this project is to develop a driving assistance system known as Panoramic Parking Assistance (PPA) which is cheap, retrofittable and compatible for every type of automobiles. PPA generates bird's eye view image using cameras installed on the automobiles. Image stitching requires to get bird's eye view position of the vehicle. Panoramic images are wide area images that cannot be available by taking one shot, attained by stitching the overlapping areas. To achieve correct stitching many algorithms are used. This study includes some type of these algorithms and presents a simple one that is economical and practical. Firstly, the mathematical model of a wide view of angle camera is provided. Then distorted image correction is performed. Stitching is implemented by using the SIFT and SURF algorithms. It has been seen that using such algorithms requires complex image processing knowledge and implementation of high quality digital processors, which would be impracticle and costly for automobile use. Thus a simpler algorithm has been developed to decrase the complexity. The proposed algorithm uses one matching point for every couple of images and has ease of use and does not need high power processors. To show the efficiency, images coming from four distinct cameras are stitched by using the algorithm developed for the study and usability for automotive application is analyzed.

• Journal of Information Display
• /
• v.12 no.1
• /
• pp.11-15
• /
• 2011

An inverse-twisted-nematic (ITN) transflective (TRF) liquid crystal (LC) display, where two imprinted optical films (IOFs) with surface microstructures are embedded was developed. One of the IOFs serves as an in-cell patterned retarder with multioptic axes, and the other behaves as a viewing-angle enhancement film. In the presence of an applied voltage, the surface microstructures on the IOFs provide the spontaneous twist of the LC from a vertically aligned state to a $90^{\circ}$ twisted-nematic (TN) state in the transmissive part, and to a $45^{\circ}$ TN state in the reflective part. The developed ITN TRF LC display exhibits high transmission and reflectance, fast response, and wide-viewing characteristics, along with achromaticity.