• 한국표면공학회지
• /
• 제37권2호
• /
• pp.110-118
• /
• 2004

The corrosion of pure titanium (CP- Ti Grade 2) and titanium alloy (Ti6Al4V ELI) were studied under various conditions of simulated body fluids. The static immersion test and the electrochemical test were performed in accordance with ISO 10271 : 2001. For the electrochemical test, the open circuit potential was monitored as a function of time, and the cyclic polarization curve was recorded. The corrosion resistance was evaluated from the values of corrosion potential, passivation current density, breakdown potential, and the shape of hysteresis etc. The effects of alloy type, surface condition, temperature, oxygen, and constituents in the fluids such as acid, chloride were estimated. Both specimens had extremely low dissolution rate in the static immersion test. They showed strong passivation characteristics in the electrochemical test. They maintained negligible current density throughout the wide anodic potential range. The passive layer was not broken up to 2.0 V (vs. SCE). The hysteresis and the shift of passivation potential toward the anodic direction was observed during the reversed scan. The passivation process appeared to be accelerated by oxygen in air or that dissolved in the fluids. The passivation also proceeded without oxygen by the reaction of constituents in the fluids. Acid or chloride in the fluids, specially later weakened the passive layer, and then induced higher passivation current density and less shift of passivation potential in the reversed scan. CP-Ti Grade 2 was more reactive than Ti6Al4V ELI in the fluids containing acid or chloride, but thicker layer produced on its surface provided higher corrosion resistance.

• 대한치과의사협회지
• /
• 제52권3호
• /
• pp.132-138
• /
• 2014

The emergence of Cone Beam Computed Tomography(CBCT) in the late 1990s represented an innovative advancement in the field of dental and maxillofacial radiology because it greatly reduced the radiation exposure to patients and offered 3D images easily. The 3D information generated by this technique brings the potential of improved diagnosis and treatment planning for a wide range of clinical applications in dentistry. The use of CBCT includes diagnosis and surgical assessment of the orofacial hard tissue lesions, dental implant treatment planning and postoperative evaluation, TMJ assessment, diagnosis of craniofacial fracture, orthodontics, endodontics, and so on. All CBCT examinations should be justified on an individualized needs. The clinical benefits to the patient for each CBCT scan must outweigh the potential risks associated with exposure to ionizing radiation. CBCT scans should be taken with initially obtained medical and dental histories of patients and a close clinical examination. CBCT should be considered as an imaging alternative of other conventional radiography in cases where the anatomical structures of interest may not be seen. The smallest possible field of view(FOV) and the lowest setting of tube current and scan time should be chosen, and the entire images scanned should be interpreted by a qualified expert.

• Archives of Plastic Surgery
• /
• 제33권2호
• /
• pp.155-160
• /
• 2006

Although several reports have been introduced about dual plane augmentation mammaplasty, the description of periareolar approach dual plane augmentation mammaplasty was few. This article describes specific characteristics, and different classification and techniques for the periareolar dual plane breast augmentation while postoperative scars resulted from inframammary crease approach caused complaints. A total of 124 patients(248 breasts) had periareolar dual plane augmentation surgery from 1998 to 2004. Anatomic implants were used in 43 cases. Most of the patients were satisfied with the outcomes of periareolar dual plane augmentation. Periareolar dual plane augmentation mammaplasty adjusts implant and tissue relationships to ensure adequate soft-tissue coverage while optimizing implant-breast parenchymal dynamics to offer increased benefits and fewer faults compared to a single pocket location in a wide range of breast types with minimal scars. Two types of dual plane classifications are discussed in this study for the periareolar approach exclusively. The boundaries of retroglandular dissection remain constant, as the costal origin of pectoralis major are divided. Type A dual plane implies that the inferior edge of pectoralis muscle lies below the inferior areolar border, and type B dual plane implies that the inferior edge lies above the superior areolar border.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제3권2호
• /
• pp.85-104
• /
• 2016

Stability and loosening of implanted femoral stems in Total Hip Replacement have been well established as barriers to the primary concerns of osseointegration and long term implant survival. In-vitro experiments and finite element modeling have for years been used as a primary tool to assess the bone stem interface with variable methodologies leading to a wide range of micromotion, interference fit and stress shielding values in the literature. The current study aims to provide a comprehensive review of currently utilized methodologies for in-vitro mechanical testing as well as finite element modeling of both micromotion and interference of implanted femoral stems. A total of 12 studies detailed in 33 articles were selected for inclusion. Experimental values of micromotion ranged from 12 to $182{\mu}m$ while finite element analysis reported a wider range from 2.74 to $1,277{\mu}m$. Only two studies were found that modeled bone/implant contact with consideration for interference fit. In studies evaluating stem micromotion in THA, the reference surface at the bone/stem interface should be well defined. Additionally, the amount of penetration considered should be disclosed and associated with bone density and roughness.

• Archives of Plastic Surgery
• /
• 제41권3호
• /
• pp.258-263
• /
• 2014

Background For early breast cancer patients, skin-sparing mastectomy or nipple-sparing mastectomy with sentinel lymph node biopsy has become the mainstream treatment for immediate breast reconstruction in possible cases. However, a few cases of skin necrosis caused by methylene blue dye (MBD) used for sentinel lymph node localization have been reported. Methods Immediate breast reconstruction using a silicone implant was performed on 35 breasts of 34 patients after mastectomy. For sentinel lymph node localization, 1% MBD (3 mL) was injected into the subareolar area. The operation site was inspected in the postoperative evaluation. Results Six cases of immediate breast reconstruction using implants were complicated by methylene blue dye. One case of local infection was improved by conservative treatment. In two cases, partial necrosis and wound dehiscence of the incision areas were observed; thus, debridement and closure were performed. Of the three cases of wide skin necrosis, two cases underwent removal of the dead tissue and implants, followed by primary closure. In the other case, the breast implant was salvaged using latissimus dorsi musculocutaneous flap reconstruction. Conclusions The complications were caused by MBD toxicity, which aggravated blood disturbance and skin tension after implant insertion. When planning immediate breast reconstruction using silicone implants, complications of MBD should be discussed in detail prior to surgery, and appropriate management in the event of complications is required.

• The Journal of Advanced Prosthodontics
• /
• 제14권3호
• /
• pp.162-172
• /
• 2022

PURPOSE. The present study aims to analyze the effect of abutment neck taper and types of cement on the amount of undetected remnant cement of cement-retained implant prostheses. MATERIALS AND METHODS. Three neck taper angles (53°, 65°, 77°) and three types of cement (RMGI: resin-modified glass ionomer, ZPC: zinc phosphate cement, ZOE: zinc oxide eugenol cement) were used. For each group, the surface percentage was measured using digital image and graphic editing software. The weight of before and after removing remnant cement from the abutment-crown assembly was measured using an electronic scale. Two-way ANOVA and Duncan & Scheffe's test were used to compare the calculated surface percentage and weight of remnant cement (α = .05). RESULTS. There were significant differences in remnant cement surface percentage and weight according to neck taper angles (P < .05). However, there were no significant differences in remnant cement surface percentage and weight on types of cement. No interaction was found between neck taper angles and types of luting cement (P > .05). The wide abutment with a small neck taper angle showed the most significant amount of remnant cement. And the types of luting cement did not influence the amount of residual cement. CONCLUSION. To remove excess cement better, the emergence profile of the crown should be straight to the neck taper of the abutment in cement-retained implant restoration.

• Journal of Periodontal and Implant Science
• /
• 제37권4호
• /
• pp.705-718
• /
• 2007

The purpose of this study was to evaluate 6 years cumulative survival rate (CSR, %) of mandibular posterior single tooth implants replaced with $Br{\aa}nemark$ $TiUnite^{(R)}$ implant system. The findings from this study were as followed ; 1. The 112 (111 persons) single implants that were placed in the mandibular posterior region were successful except 4 cases and showed 96.42% CSR. 2. The 55 (55 persons) single implants that were placed in the mandibular first molar region were successful except 2 cases and showed 96.36% survival rate. And, among the 57 (56 persons) single implants replacing the mandibular second molar. 2. failed showing 96.49% survival rate. There was no significant statistical difference. 3. Among the total 112 implants, 5.0mm wide diameter implants were placed in 96 cases(85.7%) showing 96.9% survival rate. 4.0mm standard diameter implants were placed in 16 cases showing 93.8% survival rate. There was no significant statistical difference. 4. Long implants above 10.0mm length were placed 103 cases(91.0%) and showed 96.1% survival rate. Short implants within 8.5mm length were placed 9 cases and showed 100% survival rate. There was no significant statistical difference. 5. 37 implants placed in type I, II bone quality were showed higher survival rate(100%) than that of 52 implants placed in type III, IV bone quality(92.3%). But, there was no significant statistical difference. In conclusion, $Br{\aa}nemark$ $TiUnite^{(R)}$ implant showed successful results when replacing manbibular single molar.

• 대한치과보철학회지
• /
• 제47권3호
• /
• pp.335-341
• /
• 2009

연구목적: 충분한 골질과 골량은 임플란트의 조기 실패 방지와 초기 안정성을 위해서 중요한 사항으로 알려져 있다. 임플란트 길이나 직경이 초기 안정성에 미치는 영향을 연구한 다수의 실험들이 골과의 접촉면적을 달리하였기 때문에 직경과 길이만이 초기 안정성에 미치는 실제 영향을 파악하는데 한계가 있다. 이에 유사한 표면적을 가지는 임플란트를 통하여 길이와 직경 상대적 변화가 초기 안정성에 미치는 영향을 알아보고자 하였다. 연구 재료 및 방법: 골질에 따라 피질골과 해면골의 두께가 다른 4종류의 폴리우레탄 모형골을 임플란트 식립에 사용하였다. 유사한 표면적과 형태를 가지나 직경과 길이가 서로 다른 임플란트 ($3.5{\times}13.0\;mm$, $4.0{\times}11.5\;mm$, $4.5{\times}10.0\;mm$, $5.0{\times}8.5\;mm$) 10개를 식립하고 식립 회전력과 공진 주파수를 측정하였다. 결과 및 결론: 초기 안정성에 영향을 미치는 주 요소는 골질이었으며 (P < .05), 식립 회전력과 공진 주파수 모두 골질이 우수할수록 높은 측정치를 보였다. 2. D1, D2, D3 모형골에서 임플란트의 직경이 커지고 길이가 짧아짐에 따라 공진 주파수는 유의한 차이를 보이지 않았으나 (P >.05), 식립 회전력은 증가하였다 (P <.05). 3. D4 모형골에서는 임플란트의 직경이 커지고 길이가 짧아짐에 따라 공진주파수와 식립 회전력 모두 감소하였다 (P <.05). 이상의 결과로부터 골질이 양호한 조건에서는 길이가 짧더라도 직경이 큰 임플란트의 사용이 초기 안정성 측면에서 부가적 수술의 대안이 될 수 있을 것으로 생각된다.

• 대한구순구개열학회지
• /
• 제7권1호
• /
• pp.47-61
• /
• 2004

The closure of a wide alveolar cleft and fistula in cleft patients and the reconstruction of a maxillary dentoalveolar defect in bilateral cleft lip and palate (BCLP) patients are challenging for both orthodontists and oromaxillofacial surgeons. It is due to the difficulty in achieving complete closure by using local attached gingiva (palatal flap) and the great volume of bone required for the graft. In this article, the authors used bifocal distraction-compression osteosynthesis(BDCO) to create a segment of new alveolar bone and attached gingiva for the complete approximation of a wide alveolar cleft/fistula and the reconstruction of a maxillary dentoalveolar defect. Since the alveoli and gingivae on both ends of the cleft were approximated after BDCO, the need for extensive alveolar bone grafting was eliminated. It also could create new alveolar bone and gingiva for orthodontic tooth movement and implant.

• 대한치과보철학회지
• /
• 제54권3호
• /
• pp.280-285
• /
• 2016

하악골의 결손은 선천적 기형, 외상, 골수염, 종양 절제술 등에 의하여 초래될 수 있는데, 이중 결손부위가 큰 경우는 주로 종양절제술에 의한 결손이다. 악골 결손 부위가 커질수록 저작, 연하, 교합, 발음 등에 큰 지장을 초래하게 되며 심미적으로도 불량하여 일상생활에 많은 불편을 주게 된다. 하악골이 절제된 후 그 자리에 완전히 재생되는 경우는 희박하며 인공적으로 재건해 주어야 한다 일반적으로 자가골 이식을 이용한 재건술을 시행하며, 통상적인 부분의치 혹은 총의치를 시행하거나, 지지할 수 있는 골을 얻은 상태에서 임플란트 고정성 보철, 임플란트 보조 국소의치 혹은 피개의치 등을 시행할 수 있다. 본 증례는 2004년 2월 25일, 편평세포암종 pT1N0M0, stage I로 진단 받고 구강악안면외과에서 동년 3월, 하악 좌측 부위 COMMANDO 수술(combined mandibulectomy and neck dissection operation), 광범위 절제술(wide excision), 하악골 변연절제술(marginal mandibulectomy), 견갑 설골 상부 경부청소술(supraomohyoid neck dissection, SOHND), 시행받은 환자를 하악 좌측 중절치, 하악 좌측 제3대구치 부위에 임플란트 식립하여 임플란트 보조 국소의치로 수복하였고 충분한 피개와 임플란트로의 적절한 교합력 분산을 통해 통상적인 국소의치보다 더 이로운 지지, 유지, 안정을 얻을 수 있었다. 현재까지 경과 관찰 기간은 4년 정도 되었으며, 하악 좌측 제3대구치 부위에는 주위골의 흡수양상이 관찰되어 주기적인 검진이 필요한 상황이다.