• 한국전자파학회논문지
• /
• 제23권3호
• /
• pp.314-319
• /
• 2012

본 논문에서는 MICS(Medical Implant Communication Service, 402~405 MHz)와 ISM(The Industrial, Scientific and Medical, 2.40~2.48 GHz) 대역에서 동작하는 인체 통신 중계용 안테나를 제안하고, 인체의 영향을 고려한 안테나 성능에 대한 분석을 하였다. 제안된 안테나는 loop 안테나와 영차 공진 안테나로 구성되어 있다. Loop 안테나는 ISM 대역에서 동작하며, MICS 대역에서의 동작은 loop 안테나와 영차 공진기의 용량성 결합에 의해 요구 성능을 만족할 수 있도록 구현하였다. 근거리장에 인체가 존재할 때 인체가 안테나에 미치는 영향을 분석하기 위하여 인체 팬텀을 이용하여 시뮬레이션과 측정을 하였다. 시뮬레이션 및 측정 결과, 제안된 안테나는 MICS와 ISM 대역에서 대역폭을 만족하였고, 측정된 이득값은 MICS 대역에서 -28.53 dBi, ISM 대역에서 3.85 dBi였다. 또한, 설계된 안테나의 이중 대역 특성은 인체 내 외부 간의 통신 중계 용도로 적절하다고 사료된다.

• Journal of Periodontal and Implant Science
• /
• 제37권3호
• /
• pp.543-551
• /
• 2007

When clinicians faced with an insufficient volume of supporting bone on ideally esthetic and bio-mechanical position for dental implantation, guided bone regeneration(GBR) was indicated. Although GBR has wide application at clinic, proper time of membrane removal remains qustionable in using non-resorbable membrane, such as non-expanded polytetrafluoroethylene(PTFE), The aim of this study was to compare the effect of maintenance period of PTFE membrane on bone regeneration in rabbit calvarial defects. Eight adult New Zealand white female rabbits were used in this study. Four defects were surgically made in their calvaria. Using a trephine bur, 4 'through and through' defects were created and classified into 3 groups, which were consisted of control group(no graft), experimental group 1(autogenous bone)and experimental group 2(deproteinized bovine bone; $OCS-B^{(R)}$). The defects were covered with PTFE membrane($Cytoplast^{(R)}$). Membranes were removed after 1, 2, 4 and 8 weeks post-GBR procedure in 2 rabbits repectively, All rabbits were sacrificed after 8 week post-GBR procedure. Specimens were harvested and observed histologically. The results were as follow; 1) The use of graft material and membrane was necessary in GBR procedure. 2) When PTFE membranes were removed early, the most favorable bone regeneration was revealed in experimental group T, followed by experimental group II and control group. 3) On GBR, it is recommended that membrane should maintain for 4 weeks with autogenous graft. As well, the use of xenograft need longer maintenance period than autogenous bone. Further evaluations will be needed, such as histomorphologic research, more species and different kinds of graft materials. And on the basis of these studies, clinical researches would be required.

• Archives of Plastic Surgery
• /
• 제37권5호
• /
• pp.607-612
• /
• 2010

Purpose: Maxillectomy for malignant tumor resection often leads to functional and aesthetic sequalae. Reconstruction following maxillectomy has been a challenging problem in the field of head and neck cancer surgery. In this article, we described three dimensional midface reconstructions using free flaps and their functional and aesthetic outcomes. Methods: We reconstructed 35 cases of maxillectomy defects using 9 radial forearm free flaps, 7 lattisimus dorsi musculocutaneous free flaps, 6 rectus abdominis musculocutaneous free flaps, 4 fibular osteocutaneous free flaps, and 9 anterolateral thigh free flaps, respectively. We classified post-maxillectomy defects by Brown's classification. 1 Articulation clarity was measured with picture consonant articulation test. Swallowing function was evaluated with the University of Washington quality-of-life Head and Neck questionnaire by 4 steps.2 Aesthetic outcomes were checked to compare preoperative with postoperative full face photographs by 5 medical doctors who did not involve in our operation. Results: The average articulation clarity was 92.4% (100-41.9%). 27 (81.9%) patients were able to eat an unrestricted diet. Aesthetic results were considered excellent in 18 patients (51.4%). Functional results were best in the group reconstructed with fibular osteocutaneous free flap. Considering the range of wide excision, aesthetic results is best in the group reconstructed with anterolateral thigh free flap. Conclusion: The free flap is a useful technique for the reconstruction of the midface leading to good results, both functionally and aesthetically. Especially, because osteocutaneous flap such as fibular osteocutaneous free flap offered bone source for osteointegrated implant, It produces the best functional results. And perforator flap like as anterolateral thigh free flap reliably provides the best aesthetic results, because it provides sufficient volume and has no postoperative volume diminution.

• Journal of Korean Neurosurgical Society
• /
• 제46권5호
• /
• pp.425-430
• /
• 2009

Objective : The present study analyzed the risk factors, prevalence and clinical results following revision surgery for adjacent segment degeneration (ASD) in patients who had undergone lumbar fusion. Methods : Over an 8-year period, we performed posterior lumbar fusion in 81 patients. Patients were followed a minimum of 2 years (mean 5.5 years). During that time, 9 patients required revision surgery due to ASD development. Four patients underwent autogenous posterolateral arthrodesis and extended transpedicle screw fixation, 4 patients underwent decompressive laminectomy and interspinous device implantation, and 1 patient underwent simple decompression. Results : Of the 9 of patients with clinical ASD, 33.3% (3 of 9) of patients did not have radiographic ASD on plain radiographs. Following revision surgery, the clinical results were excellent or good in 8 patients (88.9%). Age > 50 years at primary surgery was a significant risk factor for ASD development, while number of fusion levels, initial diagnosis and type of fusion were not. Conclusion : The incidence of ASD development after lumbar surgery was 11.1% (9 of 81) in this study. Age greater than 50 was the statistically significant risk factor for ASD development. Similar successful clinical outcomes were observed after extended fusion with wide decompression or after interspinous device implantation. Given the latter procedure is less invasive, the findings suggest it may be considered a treatment alternative in selected cases but it needs further study.

• 대한두개안면성형외과학회지
• /
• 제13권2호
• /
• pp.104-110
• /
• 2012

Purpose: Who may dare to state that optimal choice of treating nasal bone fracture is closed reduction? Few decades of authors' experience in nasal bone fracture has lead to believe that more active and assertive approach in nasal bone fracture by performing simultaneous lateral osteotomy may be applied in proper indications to acquire more accurate reduction and cosmetically satisfying result. Methods: From May 2008 to October 2009, among 241 nasal bone fracture patients, 20 patients underwent simultaneous lateral osteotomy with nasal bone fracture reduction. Followed by rigid septal correction, nasal cavity is packed to stabilize the fracture segment for safer osteotomy. Through intranasal incision, in selected cases of difficult reduction or for cosmetic purposes, various types of lateral osteotomy was performed corresponding to the fracture anatomy, conditions of the nasal cavity. Postoperative nasal packing was retained for one week and nasal dorsum splint for 3 weeks. Results: Lateral osteotomy was utilized for difficult cases of closed reduction, for correction of wide nose, hump and deviation in 9, 5, 2, and 4 cases, respectively. Patient satisfaction was scaled 90% in satisfaction and moderate in 10% (2 cases), complaining of mild nasal tip deviation. Physicians detected 2 cases of apparent deformity with patient recognition; one patient with mild step deformity at the osteotomy site and the other patient with minimal implant mobility. Conclusion: By accompanying profound understanding of the fracture anatomy, more active and assertive approach in nasal fracture reduction can be coincide with simultaneous lateral osteotomy to reduce the rate of secondary deformity and to obtain more cosmetically satisfying result.

• Clinics in Shoulder and Elbow
• /
• 제9권1호
• /
• pp.34-41
• /
• 2006

Purpose: This study is to analyze the result and complications of internal fixation with T-plate for two-part fracture of the neck of the humerus. Materials and Methods: The clinical results of fourteen patients who had been performed with this method mentioned above were reviewed. Their average age was 49.6. Postoperative mean follow up period was 24.1 months. Radiological evaluation was done by Kronberg's and shoulder function by Neer's. Results: By Kronberg evaluation, nine cases were good, two cases acceptable and three cases poor. By Neer's, mean score of shoulder function was 77.6 and 4 cases were excellent, one satisfactory, five unsatisfactory and four failure. The complications were the sfiff shoulder, loss of reduction and avascular necrosis of humeral head. Conclusion: In this study, there were differences according to the age. And we obtained an unsatisfactory result in patients over 50 years old. We consider that in patients over 50 years old, the differences were due to the muscle weakness through wide surgical approaches, postoperative implant loosening or the stiffness caused by poor rehabilitation.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.25-25
• /
• 2018

Electron beam melting (EBM) is one of powder based additive manufacturing technology used to produce parts for high geometrical complexity and directly with three-dimensional computer aided design (CAD) model. It is kind of the most promising methods with additive manufacturing for a wide range of medical applications, such as orthopedic, dental implant, and etc. This research has been investigated the microstructure and mechanical properties of as fabricated and hot iso-static pressing (HIP) processed specimens, which are made by an Arcam A1 EBM system. The Ti-6Al-4V titanium alloy powder was used as a material for the 3 dimensional printing specimens. Mechanical properties were conducted with EBM manufacturing and computer numerical control (CNC) machining specimens, respectively. Surface morphological analysis was conducted by scanning electron microscopy (SEM) for their surface, dissected plan, and fractured surface after tensile test. The mechanical properties were included tensile stress-strain and nano-indentation test as a analysis level between nano and macro. As following highlighted results, the stress-strain curves on elastic region were almost similar between as fabricated and HIP processed while the ductile (plastic deformed region) properties were higher with HIP than that of as fabricated processed.

• Journal of Periodontal and Implant Science
• /
• 제41권4호
• /
• pp.192-200
• /
• 2011

Purpose: The aim of this study is to compare the gene expression profile in mesenchymal stem cells derived from dental tissues and bone marrow for characterization of dental stem cells. Methods: We employed GeneChip analysis to the expression levels of approximately 32,321 kinds of transcripts in 5 samples of bone-marrow-derived mesenchymal stem cells (BMSCs) (n=1), periodontal ligament stem cells (PDLSCs) (n=2), and dental pulp stem cells (DPSCs) (n=2). Each cell was sorted by a FACS Vantage Sorter using immunocytochemical staining of the early mesenchymal stem cell surface marker STRO-1 before the microarray analysis. Results: We identified 379 up-regulated and 133 down-regulated transcripts in BMSCs, 68 up-regulated and 64 down-regulated transcripts in PDLSCs, and 218 up-regulated and 231 down-regulated transcripts in DPSCs. In addition, anatomical structure development and anatomical structure morphogenesis gene ontology (GO) terms were over-represented in all three different mesenchymal stem cells and GO terms related to blood vessels, and neurons were over-represented only in DPSCs. Conclusions: This study demonstrated the genome-wide gene expression patterns of STRO-$1^+$ mesenchymal stem cells derived from dental tissues and bone marrow. The differences among the expression profiles of BMSCs, PDLSCs, and DPSCs were shown, and 999 candidate genes were found to be definitely up- or down-regulated. In addition, GOstat analyses of regulated gene products provided over-represented GO classes. These data provide a first step for discovering molecules key to the characteristics of dental stem cells.

• 전기전자학회논문지
• /
• 제21권1호
• /
• pp.73-76
• /
• 2017

실리콘카바이드 소자는 넓은 밴드갭을 갖는 물질로서 많은 주목을 받아왔다. 특히 4H-SiC 쇼트키 배리어 다이오드는 빠른 스위칭 속도와 낮은 순방향 전압강하의 특성으로 인해 널리 사용되고 있다. 그러나 쇼트키 배리어 다이오드의 낮은 신뢰성으로 인한 문제로 대안인 Super Barrier Rectifier(SBR)가 연구되었다. 본 논문은 4H-SiC trench-type accumulation super barrier rectifier(TASBR)를 분석하고 제안한다. 2D 시뮬레이션을 통해 본 구조는 심각한 역방향 저지전압의 감소와 누설전류의 증가가 없는 동시에 순방향 전압 강하는 21.06% 향상됨을 확인 할 수 있었다. 이러한 새로운 정류기 구조를 이용하면 전력손실이 적은 애플리케이션을 기대할 수 있다.

• Journal of Periodontal and Implant Science
• /
• 제36권2호
• /
• pp.449-459
• /
• 2006

DFDBA(Decalcified freeze-dried bone allograft) is one of the allograft materials for periodontal bone regeneration. DFDBA provides an osteoconductive surface and osteoinductive factors. Therefore, DFDBA have been used successfully to regenerate the attachment apparatus during periodontal treatment. But recent studies was reported that wide variations in commercial bone bank preparations of DFDBA do exist, including the ability to induce new bone formation. DFDBA was experimental materials that was recovered, processed, tested, shipped and invoiced through Musculoskeletal Transplant Foundation. MTF(Musculoskeletal Transplant Foundation) is the world largest, non-profit, AATB(American Association of Tissue Banks) accredited tissue bank. The objective of this study was to determine the effects of serial dilutions of a DFDBA on human fetal osteoblastic cell proliferation and their potential to form and mineralize bone nodules. Human fetal osteoblastic cell line(hFOB 1.19) was cultured with DMEM and SSE($1{\mu}g/m{\ell}$,$10{\mu}g/m{\ell}$, $100{\mu}g/m{\ell}$, $1mg/m{\ell}$) at $34^{\circ}C$ with 5% CO2 in 100% humidity. Cell proliferation was significantly increased at $1mg/m{\ell}$, $100{\mu}g$, $10{\mu}g/m{\ell}$, $1{\mu}g/m{\ell}$, $100ng/m{\ell}$, $10ng/m{\ell}$, $1ng/m{\ell}$ of DFDBA after 5 days incubation (p<0.05). Alkaline Phosphatase(ALP) level was significantly increased in $100ng/m{\ell}$, $10ng/m{\ell}$, $1ng/m{\ell}$ of DFDABA(p<0.05). A quantified calcium accumulation was significantly increased at $1ng/m{\ell}$, $10ng/m{\ell}$ of MTF(p<0.05). These results indicated that DFDBA has an inductive effect on bone formation in vitro.