• ETRI Journal
• /
• v.33 no.6
• /
• pp.981-984
• /
• 2011

A novel lowpass filter with a very sharp transition band and wide stopband is proposed. The proposed filter is based on T-shaped patches which are etched in symmetrical structures and folded open stub. To obtain a wide stopband, we have used stub loaded semi-circle stepped-impedance structures. By designing the resonator with high inductance and capacitance, a very sharp transition band is achieved. The proposed filter has a 3-dB cutoff frequency at 2.37 GHz and a 40-dB rejection at 2.44 GHz. The stopband with an attenuation level better than -13.2 dB is up from 2.4 GHz to 16 GHz, and consequently we have reached the high and wide rejection in stopband with compact size. Good agreements between the simulated and the measured results are presented.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.3
• /
• pp.25-31
• /
• 2003

In this paper, we proposed a novel compact microstrip lowpass filter with an ultra-wide stopband and a sharp cutoff frequency response. To improve the cutoff response of the conventional filter, the coupling effect between two open stubs is used. The slot on the ground with conventional shunt open stubs plays an important role of increasing the stopband at a high frequency. The combination of these structures gives the filter the characteristics of an ultra-wide stopband with a prominent cutoff sharpness. The fabricated microstrip lowpass filter with the size of 19.2 mm $\times$ 14.9 mm has -3 dB cutoff frequency at 1.1 GHz and -20 dB stopband from 1.5 GHz to over 30 GHz. The insertion loss is less than -0.15 dB in the passband.

• ETRI Journal
• /
• v.31 no.3
• /
• pp.324-326
• /
• 2009

We present the design of a compact microstrip lowpass filter with a wide stopband which is up to ten times the cutoff frequency. The filter is based on a coupled-line configuration and shunt open stubs. The open stubs create additional transmission zeros, which are used to extend the stopband of the filter without any additional components or cascaded units. A prototype lowpass filter with a 3 dB cutoff frequency of 0.428 GHz and a 15 dB stopband extended up to 4.77 GHz is fabricated to validate the theoretical predictions.

• ETRI Journal
• /
• v.43 no.1
• /
• pp.133-140
• /
• 2021

Herein, we present a compact transversal bandpass filter (BPF) with an extremely wide upper stopband and multiple transmission zeros (TZ). Three signal transmission paths with shorted stubs and open-coupled lines allow signal transmission from input port to output port. Two resonant modes can be excited simultaneously and managed easily for bandpass response. Eleven TZs are achieved via transmission path cancelation; an extremely wide upper stopband with an attenuation level better than -12 dB is achieved up to 11.7 f0, where f0 is the center frequency (CF). In addition, bandwidth and CF can be controlled by adjusting electrical lengths. For proof of concept, a wideband BPF centered at 1.04 GHz with 3 dB fractional bandwidths of 49.2% was designed, fabricated, and evaluated. The overall circuit measures 0.045λg × 0.117λg; good agreement was observed between the measured and simulated results.

• ETRI Journal
• /
• v.37 no.5
• /
• pp.945-950
• /
• 2015

A novel microstrip low-pass filter is presented to achieve an ultra-wide stopband with 11 harmonic suppression and very sharp skirt characteristics. The filter is composed of a modified U-shaped resonator (which creates two fully adjustable transmission zeroes), a T-shaped resonator (which determines a cut-off frequency), and four radial stubs (which provide a wider stopband). The operating mechanism of the filter is investigated based on a proposed equivalent-circuit model, and the role of each section of the proposed filter in creating null points is theoretically discussed in detail. The presented filter with 3 dB cut-off frequency ($f_c=2.35GHz$) has been fabricated and measured. Results show that a relative stopband bandwidth of 164% (referred to as a 22 dB suppression) is obtained while achieving a high figure-of-merit of 15,221.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.1
• /
• pp.36-43
• /
• 2004

In this paper, we proposed a novel compact microstrip lowpass filter with an ultra-wide stopband and prominent cutoff sharpness using slot on the ground plane and microstrip shunt open stub. The microstrip shunt open stub and slot exhibit the different stopband response. The combined characteristics of these structures gives the ultra-wide stopband characteristics and the coupling effect between slots on the ground plane makes the prominent cutoff sharpness. The fabricated microstrip lowpass filter with the size of 20.1 mm ${\times}$ 18.7 mm has -3 ㏈ cutoff frequency at 1.187 ㎓ and -20 ㏈ stopband from 1.33 ㎓ to over 20 ㎓ and the insertion loss in the passband is less than -0.4 ㏈ form DC to 1 ㎓.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.12
• /
• pp.59-64
• /
• 2009

In this paper, the design of a new bandstop filter with an ultra-wide stopband is proposed using the metamaterial CRLH-TL. Instead of conventional periodic structures and multi-staged CRLH-TLs, extremely small one-cell type is adopted to circumvent the setbacks of conventional filters such as the lengthened ${\lambda}_g/2$-resonator ones or alternating impedance lowpass filter, and relatively slow skirt. Besides, for a very broad stopband, a strong coupling structure including stepped impedances is suggested and the zero-order resonance is made for effective size-reduction. The validity of the proposed design is proven through the fabrication and measurement, showing the overall size less than ${\lambda}_g/10$, the stopband wider than 12 GHz, 0.7 dB of the insertion loss.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.7
• /
• pp.644-652
• /
• 2004

In this paper, we designed a cascaded microstrip lowpass filter using the lowpass filters previously proposed. The previously proposed lowpass filters have a ultra-wide stopband and prominent cutoff sharpness using the combined characteristics of slot and microstrip open stub, respectively, and they are catagorized into 2 types by the method that determining their passband characteristics. The first type is determined its passband characteristics by open stub characteristics and the second is by slot characteristics. By cascading these structures with impedance adjustment of each element, the deeper out-of-band rejection and the sharper skirt response were achieved. The fabricated cascaded lowpass filters have -3㏈ cutoff frequencies at 1.035㎓ and 1.286㎓ respectively and -20㏈ stopband is over 20㎓ for both structures.

• ETRI Journal
• /
• v.36 no.2
• /
• pp.286-292
• /
• 2014

This paper presents a compact structure composed of an upper high-impedance transmission line, a middle extended parallel coupled line, and a pair of inter-coupled symmetrical stepped impedance stubs. Detailed investigation into this structure based on an equivalent circuit analysis reveals that this proposed structure exhibits a quasi-elliptic low-pass filtering response with three transmission zeros. Moreover, the positions of the three transmission zeros can be tuned and reallocated flexibly by choosing the proper circuit parameters. Finally, the design concept is validated through the design, fabrication, and measurement of two exemplary low-pass filters (LPFs) with one single unit and two cascaded asymmetric units. The measured results agree well with the simulated results. In addition, in the range of $1.42f_c$ to $7.03f_c$, the fabricated quasi-elliptic LPFs experimentally demonstrate a very wide upper-stopband of 20 dB using a compact size of only $0.0089{\lambda}_g{^2}$, where ${\lambda}_g$ is the guided wavelength of a $50{\Omega}$ transmission line at the central frequency.

• ETRI Journal
• /
• v.43 no.6
• /
• pp.957-965
• /
• 2021

A miniaturized wideband band-pass filter with a 3-dB fractional bandwidth of 109.3% (1.53 GHz to 5.22 GHz), high out-of-band attenuation greater than 25 dB, and wide upper stopband up to 14 GHz is proposed. The design consists of a dual-composite right/left handed resonator, embedded open-circuited stub, and a pair of quarter-wavelength short-circuited stubs. These elements are coupled in the near distance to form a miniature filter with a compact occupied area of 0.21 λ_g×0.19 λ_g (≈ 0.013 cm²). The optimized filter has multitransmission poles in the passband, substantially improving the return loss and insertion loss characteristics. The behavior of the passband and stopband is verified against the results of a lumped element model and matrix analysis with a full-wave moment-based analysis and actual measurements. The results of this verification and a comparison with the performance of filters in other references indicate that the proposed filter is very efficient and applicable to compact microwave systems.