• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.7
• /
• pp.719-725
• /
• 2008

In this paper, we have proposed a printed monopole antenna using parasitic elements. The broadband characteristics of the antenna is obtained by using the printed monopole and parasitic elements. To confirm the broadband characteristics of the antenna, of have designed and fabricated the proposed antenna. The return loss and radiation patterns are measured in the frequency range of$0.8{\sim}1.2\;GHz$. The measured results show that the proposed antenna has return loss less than -10 dB in the operating frequency band and the radiation pattern is the dipole-like patterns. The antenna gain varies from 1.7 to 4.6 dBi in the operating frequency band. Thus, the proposed antenna can be used for the broadband repeater antenna $0.806{\sim}0.960\;GHz$(TRS-800, CDMA and GSM-900).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.7-13
• /
• 2007

In this paper, we have designed and fabricated a small size wide-band monopole antenna which can integrate the frequency of previous business mobile communication system by adding 4 PCS of post type parasitic element on top-loaded sleeve monopole antenna. We have observed the properties of return loss upon a parameter change of element, and we also examined radiation properties in the band of PCS, W-CDMA, WiBro, W-LAN and S-DMB in order to make sure the suggested antenna's wide-band properties. We have found that the proposed antenna has omni-direction in horizontal plane and figure eight-direction in vertical plane, and we could have good return loss($Return\;loss{\leq}-10\;dB$) and $1.14{\sim}3.66\;dBi$ gain in $1.67{\sim}3.55\;GHz$ of frequency range($B/W{\fallingdotsep}72%$).

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.413-419
• /
• 2018

An UWB(Ultra Wide Band) antenna with band rejection characteristics is designed and implemented. A planar radiation patch with slot, parasitic elements on both sides of strip and ground plane on back side consist the proposed antenna. The slot in the radiation patch and parasitic elements contribute corresponding bands rejection characteristics. The slot contributes for WiMAX(World interoperability for Microwave Access, 3.30~3.70 GHz) band rejection and parasitic elements contribute for X-Band(7.25~8.395 GHz) rejection. Ansoft's HFSS(High Frequency Structure Simulator) was used to design the proposed antenna and performance simulations. Simulation result showed VSWR(Voltage Standing Wave Ratio) less than 2.0 for UWB band except for dual rejection bands of 3.30~3.86 GHz and 7.21~8.39 GHz. And VSWR measurement result for the implemented antenna shows less than 2.0 for 3.10~10.60 GHz band except dual rejection bands of 3.25~3.71 GHz and 7.25~8.46 GHz.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.467-470
• /
• 2004

In early 2004, KARI developed 5ft S-Band TT&C antenna for especially KOMPSAT-2 operation in LEOP phase. This paper shows system features of 5ft S-Band antenna and its test result with KOMPSAT-l. Tracking test, command uplink test and telemetry downlink test were performed. Through tests, 5ft antenna was verified to be operational in uplink and downlink with KOMPSAT series. Due to its inherent wide 3dB beam-width of about 7deg at S-Band, this antenna system can be used very effectively even though orbital information is less accurate like LEOP and spacecraft safe mode.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.83-89
• /
• 2020

A microstrip feedline based open ended folded-slot antenna is proposed for ultra-wideband (UWB) applications. The prototype of the proposed antenna is fabricated on the FR4 dielectric substrate. The proposed antenna has a wide n-shaped slot that is useful for designing circuit components on the same printed circuit board (PCB) as that of the radio frequency (RF) modules. The proposed antenna use two kinds of slots as radiators, and each slots have different characteristics because of the different type of ends of the slot. The wideband characteristic can be obtained by resonances of each slot which are occurred at different frequencies. The measured impedance bandwidth (S₁₁≤ -10 dB) is 2.9-11.56 GHz, and the antenna peak gain is 2-4 dBi over the UWB range. The antenna has a stable omni-directional radiation pattern and only a small group-delay variation across the UWB passband. In addition, we present a modified design with band-notched characteristics of a 5 GHz wireless local area network (WLAN) frequency band.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.3C no.5
• /
• pp.194-198
• /
• 2003

A wide-band E-plane notch phased array antenna having bandwidths of 3:1 and a scan volume of $\pm$ 45 is designed considering the active element pattern (AEP) with analysis of the full structure of E-plane notch phased array antenna. Using the numerical E-plane waveguide simulator as an infinite linear array in the broadside angle, the active reflection coefficient (ARC) of the unit element is optimized in the design frequency range. To evaluate the convergence of the AEP, the simulation of full array as changing the number array is investigated, and the minimum numbers of array that have characteristics similar to the AEP of an infinite array are determined.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.1-7
• /
• 2017

In this paper, a design method for a compact stepped open slot antenna for an operation in the UWB band is studied. The proposed antenna is miniaturized by inserting L-shaped slots on the ground plane of the stepped open slot antenna through the creation of a resonance in the low frequency, and a strip director is appended to the antenna in order to increase the gain in the middle and high frequency regions. The effects of varying the length of the L-shaped slots, the distance between the director and the slot antenna, and the director length on input reflection coefficient and realized gain characteristics of the proposed antenna are analyzed. The optimized antenna with the size of $30mm{\times}30mm$ is fabricated on an FR4 substrate, and the experiment results show that the antenna has a frequency band of 3.02-11.04 GHz for a VSWR < 2, which assures the operation in the UWB band.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.61-62
• /
• 2016

In this paper, a design method for a compact stepped open slot antenna for an operation in the UWB band is studied. The proposed antenna is miniaturized by inserting L-shaped slots on the ground plane of the stepped open slot antenna through the creation of a resonance in the low frequency, and a strip director is appended to the antenna in order to increase the gain in the middle and high frequency regions. The effects of varying the length of the L-shaped slots, the distance between the director and the slot antenna, and the director length on input reflection coefficient and realized gain characteristics of the proposed antenna are analyzed. The optimized antenna with the size of $30mm{\times}30mm$ is fabricated on an FR4 substrate, and the experiment results show that the antenna has a frequency band of 3.02-11.04 GHz for a VSWR < 2, which assures the operation in the UWB band.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.437-441
• /
• 2003

The major drawback of the classical microstrip patch antennas Is their narrow band characteristic from 1% to 5%. In this paper, to improve this drawback, we designed the antenna with stacked structure having one drive patch connected with feed line and four identical radiation patches. Resonance is achieved by adjust ing coupling area between one drive patch and four identical radiation patches and changing the size of drive patch or radial ion patches. Used substrate is FR4(${\epsilon}_r$=4.6 and t=1.6mm) and designed center frequency is 2.45GHz. The designed antenna has a wide bandwidth of 380Mhz form 2.333GHz to 2.713GHz(about 15.5%) including ISM band from 2.4GHz to 2.4835GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.9
• /
• pp.899-903
• /
• 2003

In this paper, a wide band helical antenna for mobile handset using parasitic element effect has been investigated. To obtain the effect of parasitic element, we utilized the cylindrical conductor which is not feed. As thickness of cylindrical conductor is increasing, second and third resonance frequency become abruptly variable. In case of that 4.5mm diameter parasitic element cylindrical conductor is inserted, normal mode helical antenna obtained bandwidth of around 900 MHz on the limit of R. L., - 5 dB.