• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.261-264
• /
• 2005

In this paper, wish to improve reception performance of general receiver manufacturing broadband reception amplifier that can thread easily in VHF transmit-receive equipment into downsize, light weight, low-cost. Manufactured reception amplifier expressed Characteristic that improve reception sensitive 3dBm in 140MHz ${\cdot}$ 170MHz frequency band. Therefore, may use communications equipment that utilize VHF wide-band more efficiently. Also, practical use degree is considered to be very high because telecommunication of good quality is available.

• Journal of electromagnetic engineering and science
• /
• v.19 no.1
• /
• pp.20-30
• /
• 2019

A wide-band multiple-input multiple-output (MIMO) antenna with dual-band (2.4 and 5 GHz) operation is proposed for premium indoor access points (IAPs). Typically, an omni-directional pattern is used for dipole antennas and a directional radiation pattern is used for patch antennas. In this paper, both antenna types were used to compare their performance with that of the proposed $2{\times}2$ MIMO antenna. We simulated and measured the performance of the MIMO antenna, including the isolation, envelope correlation coefficient (ECC), mean effective gain (MEG) for the IAPs, and the throughput, in order to determine its communication quality. The performance of the antennas was analyzed according to the ECC and MEG. The proposed antenna has sufficient performance and excellent characteristics, making it suitable for IAPs. We analyzed the communication performance of wireless networks using the throughput data of a typical office environment. The network throughput of an 802.11n device was used for the comparison and was conducted according to the antenna type. The results showed that the values of the ECC, MEG, and the throughput have unique characteristics in terms of their directivity, antenna gains, isolation, etc. This paper also discusses the communication performance of various aspects of MIMO in multipath situations.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.5 no.1
• /
• pp.13-25
• /
• 1968

A detailed analysis of the transistor wide-band feedback amplifiers using the hybrid-$\pi$ equivalent circuit has been made. It is considered both for the low freqnency and for the high frequency. The expressions of the gain, bandwidth. input impedance and output impedance have been presented. It is shown that a series feedback amplifier should be driven from the voltage source and should drive into the low resistance load, and a shunt feedback amplifier should be driven from the current source and should drive into the high resistance load. It is also shown that these stages can be coupled without use of the buffer stage or coupling transformer.

• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.652-656
• /
• 2011

In this paper, a transmitter-based multipath processing and inter-channel interference (ICI) cancellation scheme for a ultra-wideband (UWB) spatial multiplexing (SM) multiple input multiple output (MIMO) system is presented. It consists of taps delayed lines and zero-forcing (ZF) filters in the transmitter and correlators in the receiver. For a UWB SM MIMO system with N transmit antennas, M receive antennas, and Q resolvable multipath components, the BER performance of a linear transmit ZF scheme is analyzed in a log-normal fading channel and also compared with that of a receiver-based ICI rejection approach. It is found that when M ${\leq}$ N, the transmit ZF processing approach outperforms the ZF receiver while making the mobile units low-cost and low-power.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.3
• /
• pp.210-216
• /
• 2004

In this paper, we propose a noncoherent On-Off Keying (OOK) Ultra Wide Band (UWB) system based on power detection with noise power calibration for low power applications. The proposed UWB system achieves good bit error rate performance which is favorably comparable to that of the system using the ideal adaptive threshold, while maintaining simple receiver structure, In addition, low power Analog Front-End (AFE) blocks for the proposed noncoherent UWB transceiver are proposed and verified using CMOS technology. Simulation results on the pulse generator, delay time generator and 1-bit Analog-to-Digital (AID) converter show feasibility of the proposed UWB AFE system.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.4
• /
• pp.25-29
• /
• 1974

In this paper, a surfer wide-band FM lossy-line discriminator is investigated, as it has the merit of rediucing the dimensions of the discriminator by using proper dielectric material in the transmission tine. It is shown that the lossy-line discriminator that is made of a pair of the transmission lines satisfying the distortionless condition approximately gives almost no more deterioration in its characteristics than the ideal-line FM discriminator, while the dimensions of the transmission lines of the discriminator can be reduced greatly.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.4E
• /
• pp.120-124
• /
• 2004

A new type of high frequency wideband ultrasonic transducer with a separation between a transmitter and a receiver was proposed and its characteristics were simulated using a PSpice model. The piezoelectric ceramic $PbTiO_{3}$ as a transmitter and the piezoelectric copolymer P(VDF- TrFE) as a receiver were used for high sensitivity and wide bandwidth, respectively. The characteristics of the focusing transducer with center frequency of approximately 35MHz fabricated in this study showed very wide bandwidth, which could give an axial spatial resolution better than $30{\mu}m$ in B-mode image for biological tissues.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.12 no.4
• /
• pp.9-17
• /
• 1993

Three types of piezoelectric sensors to detect acoustic emission signals were developed and characterized. Epicentral displacement and velocity of a plate to have infinite boundary were calculated by convolution between a Green's function and a simulated source time function to show parabolic rising characteristic. The sensor calibration system set up was composed of a steel plate, a glass capillary, an indentor and a load cell indicator The transient elastic signals were detected by the sensors. The results were compared with the theoretical results and Fast Fourier Transformed. As the results, the sensor fabricated using a disk shape of a piezoelectric PZT element showed resonant characteristics. The sensors fabricated using a conical shape PZT element and a PVDF polymer film showed the wide band characteristics for particle displacement and velocity, respectively. The calculated results showed good agreements with the transient responses in the cases of the wide band sensors and it was confirmed that the simulated source time function had been properly assumed.

• Publications of The Korean Astronomical Society
• /
• v.32 no.1
• /
• pp.127-129
• /
• 2017

We have observed ~60 Weak-line T Tauri stars (WTTSs) toward the Chamaeleon star forming region using the AKARI Far-Infrared Surveyor (FIS) All-Sky maps. We could not detect any significant emission from each source even at the most sensitive WIDE-S band. Then, we have performed stacking analysis of these WTTSs using the WIDE-S band images to improve the sensitivity. However, we could not detect any significant emission in the resultant image with a noise level of $0.05MJy\;sr^{-1}$, or 3 mJy for a point source. The three-sigma upper limit of 9 mJy leads to the disk dust mass of $0.01M_{\oplus}$. This result suggests that the disks around Chamaeleon WTTSs are already evolved to debris disks.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.958-964
• /
• 2001

In this paper, we propose a novel wide band printed monopole antenna called the staircase bow-tie monopole antenna (SBMA). We apply an extraordinary method for an impedance matching to conventional bow-tie monopoles. So we get the SBMA with a very wide band. Our antenna is smaller than a quarter wavelength in size but provides a 2:1 VSWR bandwidth of about 77.1 %. An antenna gain and a radiation pattern are about 1.7 dBi and omni-directional at 1.7 GHz, respectively.