• The Journal of Engineering Research
• /
• v.3 no.1
• /
• pp.139-146
• /
• 1998

Frame relay is a high speed wide area network technology that is used to connect various networks. Combining the advantages of packet switching and circuit switching, frame relay offers high throughput and reliability that is perfect for a variety of today's business applications. In this study, we briefly characterize frame relay technology, survey standardization activities and investigate domestic frame relay market. We developed an experimental system for the dial-up service to access remotely an enterprise network using frame relay network, and tested the performance and cost effect of the experimental system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.100-106
• /
• 2013

AMI enables bi-directional exchange of information between utilities and consumers in order to maximize energy efficiency. To enable the AMI, it is essentially required to construct stable communication networks. This paper shows the AMI system based on IEEE 802.11s as one of the communication methods. Experimental results show that the wireless mesh network technology achieves a stable communication performance over a wide coverage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1A
• /
• pp.64-73
• /
• 2000

Since so many potentials of services, applications, marketing and regulation, it is difficult to decide the fair pricing scheme of network services. However, these considerations are not particular to the operation of a communications network, which is closely related to technological constraints for QoS guarantee. In this paper, the power spectral analysis of MPEG video based on the P-MMBBP model is discussed in the manner of the QoS degradation to the packet delay. As a consequence of the QoS-degradation, a new fair-pricing scheme with the discount factor is proposed. As a result, the proposed scheme shows good characteristics to guarantee the fairness of the charging in the Internet wide-area network.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.209-213
• /
• 2005

The current AIS network and. system are run on a full scale with 22 ground stations and. 11 operational systems, completing a nation-wide, integrated network However, currently it needs to manage sea traffic by linking AIS to VIS which 1vs a limited service area due to restricted radar detection zones in harbors or coastal areas. Accordingly this study analyzes the current status of the AIS system and. proposes technological and. operational improvement plan of the current AIS system through investigating the actual conditions of the AIS system and. its operations.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.356-361
• /
• 1998

Neural Networks, modeled succinctly from the real nervous system of a living body, can be categorized into two folds; artificial neural network(ANN) and biological neural network(BNN). While the former has been developed to solve practical problems using function approximation capability, pattern classification) clustering algorithm, etc, the latter has been focused on verifying the information processing capability to which brain research gives an impetus, by mimicking real biological systems. However, BNN suffers Iron severe nonlinearities dealt with. A bridge between two neural networks is chaotic neural network(CNN), which simply delineate the real nor-vous system and comprises almost all the ANN structures by selecting parameters. Main research theme of this area is to develop an explanation tool to clarify the information processing mechanism in biological systems and its extension to engineering applications. The CNN has a Gaussian-shaped refractory function with hysteresis effect and the chaotic responses of it have been observed fur a wide range of parameter space. Through the examination of the coupling effects of excitatory and inhibitory connections, the secrets of information processing and memory structure will appear.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.79-84
• /
• 2015

Transformer is widely used element on power system and industrial area. Especially the transformers installed at power system are exposed to an environment of arbitrary changed. Thus the prediction of degradation and the analysis of response to impulse are important. To conduct those works, the electrical characteristics of system should be analyzed, effectively. But the analysis of electrical characteristic in electric machine level such as pole and pad-mounted transformer is almost no, thus commercial VNA (Vector Network Analyzer) is used to getting the response in wide frequency range. However, the output power of VNA is usually under 10mW, so verification for effectiveness of measuring electrically large component should be conducted, firstly. Next, after getting total S-parameter of transformer, predicting impulse response can be performed in time-domain with circuit simulator. In this paper, it is introduced that verification effectiveness of VNA using transfer function from SFRA (Sweep Frequency Response Analyzer), firstly. Next, total S-parameter, six by six matix form, was built using measured 2 port S-parameter from vector network analyzer. To get the response to impulse which is defined by IEC 60060-1, time-domain simulation is conducted to ADS (Advenced Design System) circuit simulator.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1814-1820
• /
• 2018

State estimation of power systems has become vital in recent days of power operation and control. SCADA and EMS are intended for the state estimation and to communicate and monitor the systems which are operated at specified time. Although various methods are used we can achieve the better results by using PMU technique. On placing the PMU, operating time is reduced and making the performance reliable. In this paper, PMU placement is done in two ways. Those are 'optimal technique with pruning operation' and 'depth of unobservability' considering incomplete and complete observability of a network. By Depth of Unobservability Number of PMUs are reduced to attain Observability of the network. Proposed methods are tested on IEEE 14, 30, 57, SR-system and Sub systems (1, 2) with bus size of 270 and 444 buses. Along with achieving complete observability analysis, single PMU loss condition is also achieved.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1453-1458
• /
• 2009

Sensor network for the human approach in a difficult area and a wide range of surveillance and the boundaries for the purpose and mission is the utilization significantly. In this paper we searched important nodes from the surveillance reconnaissance sensor network based on the virtual data. we generated data within the sensor's measurement range in the data transmitted from sensor nodes, and used PCA(Principle Component Analysis) for searching key node. If the important sensor node searched, and we can have easy management and establishing security measures when security problems is happened about nodes. This is for the sensor network in terms of effectiveness and cost-effectively and is directly connected with life span.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.913-922
• /
• 2020

In this paper, we propose a LoRa communication module using the LoRa RF module of Murata Electronics is designed to configure the IoT digital meter remote meter reading and a method of configuring a remote meter reading network by collecting multiple meter data in a DCU (Data Concentrate Unit) to configure a network with LoRaWAN. The developed system can be installed more easily and economically in the network configuration than the existing system by allowing the meter to be directly connected to the network or matched with a DCU to connect to the network according to the configuration of the consumer. The developed system was constructed using a digital water meter as an example, but it can also be applied to remote meter reading of the metered values of other meters such as electricity, water, gas, hot water and calorie meters. The main development contents are the design, configuration, and construction of digital meters, LoRa modules and DCUs, and how to connect the LoRaWAN network and transmit meter data to the server. By networking these devices, the system is configured, and the actual LoRaWAN communication is tested and the result is shown.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.3
• /
• pp.369-381
• /
• 2019

As tactical networks are gradually shifting toward IP-based flexible operation for diversified battlefield services, QoS(Quality-of-Service) coordination for service differentiation becomes essential to overcome the heterogeneous and scarce networking resources limitations. QoS coordination for tactical network traffic should be able to monitor and react the dynamic changes in underlying network topology and service priorities. In this paper, by adopting the emerging cloud-native service mesh concept into tactical network context, we study the feasibility of intelligent QoS coordination by employing tactical service mesh(TSM) as an additional layer to support enhanced traffic quality monitoring and control. The additional TSM layer can leverage distributed service-mesh proxies at tactical mesh WAN(Wide Area Network) nodes so that service-aware differentiated QoS coordination can be effectively designed and integrated with TSM-assisted traffic monitoring and control. Also, by validating the feasibility of TSM layer for QoS coordination with miniaturized experimental setup, we show the potential of the proposed approach with several approximated battlefield traffics over a simulated TSM-enabled tactical network.