• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.1 no.4
• /
• pp.313-318
• /
• 1989

Experiments have been performed to find an optimum filling quantity of working fluid in a heat pipe. The optimum operation has been defined to give a minimum temperature difference between evaporator and condenser. The experimental results show that there exists an optimum filling quantity which is slightly smaller than that calculated by the well known formula from the geometry of the wick. When the concaved vapor-liquid interface at the wick is taken into account to calculate the required quantity of working fluid, the computed value agrees with the experimentally determined quantity.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1241-1246
• /
• 2004

The heat flux on a chip is rapidly increasing with decreasing the size of one. It is necessary to properly cool the high heat flux chip. One of the promising cooling methods is to apply CPL heat pipes with porous materials, for example PVA, polyethylene, and powder sintered metal plate and with microchannels in the evaporator. A small scale CPL heat pipe with PVA as wick was designed and manufactured. Since the height difference between the evaporator and the condenser is a crucial parameter in the CPL heat pipes, the performance of the heat pipes depending on the parameter was investigated. The parameter is higher the performance is better. However, the improvement rate of the performance does not increase the increase rate of the height. In addition to, the parameter effect depending on heat input was investigated.

• Asian Journal of Turfgrass Science
• /
• v.16 no.1
• /
• pp.1-10
• /
• 2002

The influence of calcium on the growth of creeping bentgrass 'Penn-Al', perennial ryegrass 'Palmer II', Kentuckuy bluegrass 'Nassou' and tall fescue 'Boonsai 2000' in greenhouse was investigated. Creeping bentgrass 'Penn-A1', Kentucky bluegrass 'Nassou' and tall fescue 'Boonsai 2000' at Ca 4.0 me/L, and perennial ryegrass 'Palmer II' at Ca 2.0 me/L showed the best shoot growth. Creeping bentgrass 'Penn-A1', perennial ryegrass 'Palmer II' and Kentucky bluegrass 'Nassou' at Ca 1.0 me/L, and tall fescue 'Boonsai 2000' at Ca 4.0 me/L showed the best root growth, and there was little or no difference between different Ca concentrations. Creeping bentgrass 'Penn-Al' and Kentucky bluegrass 'Nassou' at Ca 4.0 mea, and perennial ryegrass 'Palmer II' at Ca 1.0 me/L had the highest number of tillers, and tall fescue 'Boonsai 2000' at Ca 4.0 me/L had the highest, but there was no difference between different Ca concentrations. As application rate of Ca concentration became higher, the concent of Ca in plant tissue increased, while the content of Mg in plant tissue decreased, and the content of Fe in plant tissue increased to Ca 4.0 me/L. The Ca treatment had not effect on N, p, K, and Zn of tissue content. The wick pot applied will be to research of plant nutrition in future because utilization of wick pot has an excellent precision and convenience.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.4
• /
• pp.320-327
• /
• 2006

Numerical analysis and experimental study are performed to investigate the effect of heat load and operating temperature on the thermal performance of several variable conductance heat pipe (VCHP) with screen meshed wick. The heat pipe is designed in 200 screen meshes, 500 mm length and 12.7 mm outer diameter tube of copper, water (4.8 g) is used as working fluid and nitrogen as non-condensible gas (NCG). Heat pipe used in this study has evaporator, condenser and adiabatic section, respectively. Analysis values and experimental data of wall temperature distribution along axial length are presented for heat transport capacity, condenser cooling water temperature change, degrees of an inclination angle and operating temperature. These analysis and experiment give the follow findings: For the same charging mass of working fluid, the operating temperature of heat pipe becomes to be high with the increasing of charging mass of NCG. When the heat flux at the evaporator section increases, the vapor pressure in the pipe rises and consequently compresses the NCG to the condenser end part and increases the active length of the condenser. From previous process, it is found out we can control the operating temperature effectively and also the analysis and experimental results are relatively coincided well.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1623-1628
• /
• 2004

Recently mini-channels or micro-channels are widely used for cooling the high density power electronic devices. Especially, the channels are used in small and high efficient equipments such as heat pipes and heat exchangers. Interfacial velocities between liquid and gas phases are very important in mini or micro-channels. In this paper, an experiment and a numerical analysis on the interfacial velocities were performed. In the experiment, the interfacial velocities which were measured by the high-speed CCD camera were about $26{\sim}33$ cm/s and the velocities increased as the inclination angle did. In the numerical experiment, CFD-ACE+, a commercial program, was used, the velocities had similar values with experimental results. As the inclination angle and the contact angle increased, the interfacial velocities did because of the surface tension which causes to move the interface. The effect of inclination angle was larger in the converging channels than in straight channels.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.1
• /
• pp.70-76
• /
• 2004

High-temperature cylindrical sodium/stainless-steel heat pipes were manufactured and tested for transient as well as steady states. Total length of the heat pipe was 1 m and the diameter was 25.4 mm. Screen meshes of 3 different sizes were used to estimate the effect of mesh size on the thermal performance of the heat pipe. The minimum thermal resistance achieved was as low as 0.02$^{\circ}C$/W for the maximum thormal load of 2 ㎾. The average heat transfer coefficient in the evaporator was about 2,000 ㎾/$m^2$K and those in the condenser region were up to 5 times higher.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2110-2115
• /
• 2008

In this study, We disigned and manufactured the Hot Chuck which can be operated until $120^{\circ}C$. Its shape is circular, wide is 300mm and depth is 15mm. Two types working fluid was used as working fluid(distilled water, 0.1%-$TiO_2$ nanofluid). The experimental results were compared to each working fluid. The effect of various working fluid, charging volume ratio was investigated. Also we investigated heat transfer rate against each working fluid. By using nanofluid, heat transfer rate can be enhanced and the wick structure can be constructed automatically on smooth surface. The experiment of 40% charged 0.1%-$TiO_2$ nanofluid showed the best performance of thermal accuracy and uniformity. To improve performance of Hot Chuck, more study is needed.

• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.419-426
• /
• 2010

This paper discusses a series of experiments including material improvement in order to ensure quality of grouting for the post-tensioned structure. In presstressed concrete, grouting refers to the construction procedure of filling empty space of duct enclosing the prestress tendons using cementitious material, To date, adequate quality control of the grouting has not been established in Korea because the relationship between the grouting and durability of post-tensioned structure is not well-recognized. The Korean standard does not consider the important material characteristic, wick effect, which is caused by tendons in the ducts, and furthermore current standard testing method does not quantify reasonable material segregation. As a result, the grout material, which satisfies the current material standards, may well exhibit excessive bleeding of water or shrinkage during construction. In this study, international codes and standards related to grouting were surveyed. The mix proportions of the constituents and novel admixtures were suggested to meet equivalently with these standards. Performance of this enhanced grout was compared with common domestic grouts using the international standard testing method. A series of mock-up specimens considering geometry of PC beam was constructed and grout flow pattern was observed as the grout was injected. It was observed that the grouting performance was highly influenced by material properties and filling characteristic can be varied depending on geometry of ducts.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.6
• /
• pp.607-613
• /
• 2010

A seawater distiller, in which the waste heat from a portable electric generator was used, with a multiple-effect diffusion still was designed. The waste gas from small generators commonly used in islands has not yet been used because it has less thermal energy; however, this waste gas can be used as a heat source for small-capacity distillers and as an additional heat source for solar stills. The proposed distiller comprises a series of closely spaced parallel partitions that are placed in contact with saline-soaked wicks. In the distiller, evaporation and condensation processes are repeated to recycle the thermal energy for increasing the distillate productivity. Experimental results show that the proposed distiller with only one-effect still can produce at least 6.7 kg/day of distilled water; the proposed distiller with a ten-effect still is expected to produce 43 kg/day of distilled water. This amount of distillate is approximately four times the maximum daily productivity of the solar stills, as determined in outdoor experiments.

• Korean Journal of Organic Agriculture
• /
• v.23 no.2
• /
• pp.311-322
• /
• 2015

The study was conducted on growth and yield of potatoes in a wick hydroponic culture as affected by concentration of aqueous extracts in order to develop natural agricultural resources using Persicaria longiseta. Each 500 ml of distilled water (control) and P. blumei extracts (25%, 50%, 75%, and 100%) was applied to potato plants at 5 d intervals from 1 d after potato transplanting. The potatoes with P. blumei extract emerged 1 d earlier and had 0.3 to 0.4 more stem numbers per plant compared with those of control plot. The plant height was higher in plots with P. blumei extract than in control in early stage of potatoes (50 d), but there was no significant difference observed after mid-stage of potatoes (70 and 90 d). The stem diameter and fresh weight of potatoes estimated a higher values in plots with P. blumei extract than in control plots, although there was no statistical difference. The 100% P. blumei extract increased by up to $13.8kg/m^2$ of potato yield. The numbers of tubers in classes of < 5 g and 5 to 30 g per plant did not show a specific trend among experimental treatments while it in class of > 30 g was much higher in plots with P. blumei extract than in control plot. Accordingly, the P. blumei extract had a positive effect on the growth and yield of potatoes, could be applied as of eco-friendly fertilizers