• Journal of Digital Contents Society
• /
• v.18 no.5
• /
• pp.895-904
• /
• 2017

In this paper, we propose an IoT based smart outlet system for one-person household with electric safety, electric energy consumption management and transmission of messages to the reserved contacts by connecting the emergency network. The proposed smart outlet system is implemented by parsing packet data and protocol between server, module, application and WiFi AP receiver. The WiFi AP built for communication can be used not only for the outlet but also for the gas barrier, the door lock and the like. In addition, the proposed method can provide the remote monitoring function by receiving the amount of power of the receptacle received through the AC current sensor (SCT-013) in real time. The smart outlet system is expected to be capable of automatically shutting off the power in case of emergency through automatic power use analysis in addition to the standby power cutoff function.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.210-216
• /
• 2014

In this paper, it was proposed to develop front and rear image monitoring system for vehicle that help a driver to cope with urgent situation about a dangerous element. When parking a vehicle, the risk factors to be formed by the dead zone can be resolved by using anterior and posterior cameras of the vehicle. In embedded system environment, a SoC(System on Chip) and two high-resolution CMOS (Complementary metal-oxide-semiconductor) image sensors were used to transfer two high-resolution image data through he TCP/ IP-based network. To transfer image data through he TCP/ IP-based network, the images received by two cameras were compressed by using H.264 and they were transmitted with wireless method(Wi-Fi) by using real-time transport protocol (Real-time Transport Protocol). Transmission loss, transmission delay and transmission limit were solved in wireless (Wi-Fi) environment and the bit-rate of two image data compressed by H.264 was adjusted. And the system for the optimal transmission in wireless (Wi-Fi) environment was materialized and experimented.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.462-463
• /
• 2019

The study is a method for preventing the natural ignition of indoor low coal coal in coal-fired power plants. It is a method of monitoring the temperature of coal stored in total by combining Internet technology (IoT) with sensor technology as a location confirmation method to detect the natural ignition of coal in advance and to alarm the location of the ignition site.

• Smart Media Journal
• /
• v.4 no.2
• /
• pp.46-54
• /
• 2015

Communication between ECUs (Electronic Control Units) in agricultural machineries tends to use IS011783 widely, that is PGN (Parameter Group Number) based communication protocol lays on CAN protocol by altering its identifier part. Messages in line are transferred and received between ECUs according to ISO11783 standard. This paper discusses about design of wireless monitoring system. We used an ARM Cortex-M3 microcontroller embedded development board and marvel8686 wireless module. The wireless ISOBUS monitoring system, attached to communication line, reads messages, interpret them, and display them on the screen in easily comprehendible form. It can be used to generate messages and monitor the traffic on physical bus systems. The monitoring system connected to ECUs, monitor and simulate real traffic of communication and functionality of the ECUs. In order to support our work, we have implemented the monitoring tool. The development consists of two parts: GUI of the application and firmware level programming. Hence the monitoring system is attached to the communication line and equipped by Wi-Fi module; farmer/dispatcher in a farm monitors all messages in communication line on personal computer and smart device.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.9
• /
• pp.1132-1140
• /
• 2016

According to global trend, despite the overall scale of agricultural industry has been downsized, agriculture accommodating cutting-edge ICT technologies has been proliferated, and various timely-issued relevant researches have been on progress to deploy the future food cultivation. In this paper, we propose an effective nutrient management system with web-based monitoring with functionality of controlling temperature, humidity, pH (hydrogen ion), EC (Electric Conductivity), LED and cooling fan to maintain the hydroponic nurturing environment being optimal. In this paper, in order the arduino hardware and java software are employed to control the nurturing environment automatically in optimal fashion. In proposed system, due to the usage of WiFi router with the socket communication and DB-assisted Web server with proper interfaces, it allows to facilitate the management to keep monitoring and controling overall hydroponic nurturing environment. Since the proposed Web-based management system provides the superior reliability, the short nurturing period and the robustness to the pest by controlling LED emitting color rather than conventional system, so it can be applied and appropriate for in-house vegetable factory overcoming limitation of time and location.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.23-29
• /
• 2011

We try to build the base for implementation of smart water treatment plant through identifying status by data acquisition such as temperature, humidity, flow, level, pump status and CCTV by using USN terminal such as Zigbee, Wi-Fi, UHF at the center of the flowmeter calibration center in K-water institute. The data obtained from various sensors is transmitted to data processing device through different types of USN network, the processed data is implemented to monitor by smart phone and we try to perform low cost and high efficient USN-based pilot project by implementing remote monitoring system using network performance analysis and mobile devices.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.751-756
• /
• 2018

In smart factories and industrial IoT, all facilities in a factory are monitored over the Internet, thereby facility can reduce the downtime and increase the availiability by preventive maintenance before it breaks down. The abnormal conditions of the major facilities in the plant are caused by abnormal temperature rise, vibration, and variations in noise. Consequently, it is critical to develop a very small smart device that is easily installed in a small space to enable real-time monitoring of the vibration status of the facility. In this study, smart devices were developed for smart factory fault prediction and robustness management using ultra small micro-controllers with WiFi capabilities and MEMS acceleration sensors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1730-1740
• /
• 2016

This paper introduces a guest identity provider system for eduroam which is a global Wi-Fi service targeting users enrolled in higher education and research institutions. Developed eduroam AND (AutheNtication Delegation) system enables users to create their eduroam user accounts and to access eduroam regardless of their locations. Users with no organizational eduroam account therefore can freely access eduroam using the system. A federated authentication model is implemented in the system, and thus the system has merits of having high accessibility, indirectly verifying users and organizations possible, saving management overhead. Status monitoring is essential because authentication request and response messages are routed by eduroam network. eduroam AND performs active monitoring to check service availability and visualizes the results, which increases operational and management efficiency. We leveraged open-source libraries to implement eduroam AND and run the system on KREONET (Korea REsearch Open NETwork). Lastly, we present implementation details and qualitively evaluate the system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.539-541
• /
• 2016

In this paper, we proposed real time free-length monitoring systems interlocking with the spring free-length sorter which shows the state of production connected to the spring production device. This systems enable the administrator to check the quality or quantity of product and the defect rate, etc., in the remote place. The proposed systems are comprised of the wireless device interlocking with PLC device, the server program, and user GUI program. The wireless device transmits the received data from PLC device to server program using Wi-Fi. Server program represents the data from the wireless device on the screen and insert those data into database. User GUI program shows data stored in database and supports the function which converts the stored data in DB to excel file.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.171-172
• /
• 2012

최근 스마트폰의 보급률이 높아짐에 따라 생활 속에서 편리하게 쓸 수 있는 영상 서비스 어플리케이션들이 많이 개발되고 있다. 그에 따라 본 논문은 영상정보를 이용하면서 보안 및 기타 영상정보가 필요로 하는 환경에서 방문자에 대한 영상정보를 스마트폰(Smart-phone)으로 서비스하여 방문자를 인식하고 사용자 요구에 따라 필요한 메시지를 전송하거 원격지 디바이스를 원격에서 관리할 수 있는 원격 관리용 어플리케이션을 안드로이드(Android) 기반으로 개발하고자 한다. 이러한 어플리케이션의 구성은 블루투스(Bluetooth) 무선 통신모듈을 이용하거나 WiFi인 무선 TCP/IP 통신 기술을 이용하여 영상정보를 원격 서버에서 관리하도록 시스템을 구성하여 시스템의 활용 가능성을 제시하고자 한다.