• Korean Journal of Construction Engineering and Management
• /
• v.23 no.6
• /
• pp.65-75
• /
• 2022

As performance measurement is important for systematic management, the key indicators for performance measurement have been consistently researched in the construction industry. However, there are only a few cases in which performance measurement is performed because it requires strenuous efforts to collect data for measurement. Unlike the public sector, which has been collecting project data through laws, the private sector has very little data to measure performance. In contrast, supervision work concerns important data necessary for the performance management on building construction sites in accordance with the Building Act. Therefore, in this study, we used the data from supervisory reports to measure the performance of private building projects. First, we derived 6 performance areas and 15 indicators through a few rounds of expert group discussions and 2 surveys. Then, we identified the performance indicators with high feasibility of data collection and computed their degree of significance via the analytic hierarchy process. It is expected that the performance indicators and their computational processes derived in this study can be used to systematically measure the performance and aid the speedy diagnosis of private building construction sites.

• Journal of Conservation Science
• /
• v.38 no.3
• /
• pp.243-253
• /
• 2022

Using non-destructive analytical methods, we identified the material characteristics of two gold fabric artifacts excavated from the Cheongsong Sim clan (Bugeum Wonsam, Jikgeum Chima), including the artifact condition, fiber type, surface contamination, and metallic threads. We found that the artifacts were buried and had turned brown; thus, we were unable to determine their original color. The fiber type was determined to be silk from cocoons, based on scanning electron microscopy, Fourier transform infrared (FT-IR) analyses of Amide I, II, III, and IV peaks, and color reactions Further, the FT-IR and X-ray fluorescence (XRF) analyses identified the white and black stains as natural resin hydrolyzed substances, such as lipids and proteins, that occurred as microbial decomposition due to body decay. Finally, the XRF analyses identified the thin gold layer of the metallic yarn as gold (Au). According to the FT-IR data and the color reaction to the metallic yarn medium, the adhesive component of the medium was a product of-Amides I, II, III, and 3000 cm^-1 within Amides A and B (an animal type), respectively. Thus, the medium was identified as Hanji (Korean paper), which is made from domestically produced Broussonetia kazinoki fibers.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.5
• /
• pp.37-51
• /
• 2010

In this paper, we discuss the program implementation and system optimization for the effective transfer of huge amount of data. In VLBI which is observing the celestial bodies by using radio telescope hundreds thousands km apart, it is necessary for each VLBI observatory to transfer up to terabytes of observed data. For this reason, e-VLBI research based on advanced network is being actively carried out for the transfer of data efficiently. Following this trend, in this paper, we discuss design & implementation of system for the high speed Gbps data transfer rates. As a data transfer protocol, we use UDP for designing data transmission program with much higher speeds than currently available via VTP(VLBI Transport Protocol). Tsunami-UDP algorithms is applied to implementing data transfer program so that transmission performance could be maximize, also we make it possible to transfer observed data more fast and reliable through optimization of computer systems in each VLBI statopm.

• Journal of Ecology and Environment
• /
• v.46 no.1
• /
• pp.1-7
• /
• 2022

Background: In this study, we proposed that the population dynamics of non-native red-eared sliders (Trachemys scripta elegans) depends on the species' habitat extension and survivorship. We used a logistic equation with time-dependent habitat carrying capacity. In detail, the present carrying capacity depends on the red-eared slider population of the previous year. Anthropogenic activities such as the abandonment of previously captive red-eared sliders or the release due to religion customs would supply new habitats to the species. Therefore we assumed that anthropogenic spread increases the habitat carrying capacity. Based on the urbanization increase rate of 3% in Korea from 1980 to 2000, we assumed an annual spread of 3% to simulate the population dynamics of the red-eared slider. In addition, the effect on the population of an increase of natural habitats due to migration was simulated. Results: The close relationship between the distributions of non-native red-eared sliders and of urbanized areas demonstrates that urbanization plays an important role in providing new habitats for released individuals. Depending on the survivorship, the population of the red-eared slider in Korea increased 1.826 to 3.577 times between 1980 and 2000. To control population growth, it is necessary to reduce carrying capacity by reducing habitat expansion through prohibition of release into the wild ecosystem and careful managements of the wetland or artificial ponds. Changes in the habitat carrying capacity showed that the population fluctuated every other year. However, after several years, it converged to a consistent value which depended on the survivorship. Further, our results showed that if red-eared sliders expand their habitat by natural migration, their population can increase to a greater number than when they have a 99% survivorship in a fixed habitat. Conclusions: Further introductions of red-eared sliders into wetlands or artificial ponds should be prohibited and managed to prevent future spread of the species. Moreover, it is important to reduce the species' survivorship by restoring disturbed ecosystems and maintaining healthy ecosystems.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.3
• /
• pp.226-233
• /
• 2023

In this study, two phases were conducted to investigate the direct injection of gaseous CO₂ into cement mortar. The aim was to advance carbon capture, utilization, and storage (CCUS) technology by harnessing industrial waste CO₂ from the domestic ready-mixed concrete industry. In the first phase, the factors influencing the physical properties of cement mortar when using gaseous CO₂ were identified. This included a review of materials to achieve physical properties comparable to a reference formulation. As a result of this phase, it was confirmed that traditional approaches, such as adjusting the water-to-cement ratio, had limitations in achieving the desired physical properties. Consequently, the second phase focused on the optimization of CO₂-injected mortar. This involved studying the CO₂ application and mixing method for cement mortar. Changes in properties were observed when gaseous CO₂ was injected into the mortar. The optimal injection quantity and time to enhance the compressive strength of mortar were determinded. As a result, this study indicated that an extra mixing time exceeding 120 seconds was necessary, compared to conventional mortar. The optimal CO₂ injection rate was identified as 0.1 to 0.2 % by weight of cement, taking both flowability and compressive strength performance into account. Increasing the CO₂ injection time did not further enhance strength. For this approach to be employed as a CCUS technology, additional studies are required, including a microstructural analysis evaluating the amount of immobilized CO₂.

• Journal of the Korean Society of Radiology
• /
• v.17 no.6
• /
• pp.929-937
• /
• 2023

Human equivalent phantoms manufactured using 3D printers are cheaper and can be manufactured in a short time than conventional human phantoms. However, many phantoms are manufactured with less than 100 % of Infill Density, one of the 3D printer output setting variables. Therefore, this study compared the Bone Phantom CT number, which differs from the ratio of five Infill Density produced using a 3D printer, to the CT number of the actual human body Bone. In addition, the usefulness of the manufactured phantom was evaluated by producing a 100 % elbow joint phantom with Infill Density and setting the Infill Density to 100 % through CT number comparison for each tissue on computed tomography (CT). As a result, the Bone Phantom printed with 100 % Infill Density did not show the most statistically significant difference from the CT number value of the actual human Bone, and the CT number of each tissue did not show a statistically significant difference from the CT number value of each tissue of the actual human elbow joint.

• Journal of Drive and Control
• /
• v.20 no.4
• /
• pp.115-122
• /
• 2023

This study utilized a discrete element method (DEM) simulation, as one of the virtual field trials, to predict the impact of tillage depth on the rotary blade shaft during rotavator tilling. The virtual field for the simulation was generated according to soil properties observed in an actual field. Following the generation of particles for the virtual field, a sequence of calibration steps followed to align the mechanical properties more closely with those of real soil. Calibration was conducted with a focus on bulk density and shear torque, resulting in calibration errors of just 0.02% for bulk density and 0.52% for shear torque. The prediction of the load on a rotary tiller's blade shaft involved a three-pronged approach, considering shaft torque, draft force, and vertical force. In terms of shaft torque, the values exhibited significant increases of 42.34% and 36.91% for every 5-centimeter increment in tillage depth. Similarly, the vertical force saw substantial growth by 40.41% and 36.08% for every 5-centimeter increment. In contrast, the variation in draft force based on tillage depth was comparatively lower at 18.49% and 0.96%, indicating that the effect of tillage depth on draft force was less pronounced than its impact on shaft torque and vertical force. From a perspective of agricultural machinery research, this study provides valuable insights into the DEM soil modeling process, accounting for changes in soil properties with varying tillage depths. These findings are expected to be instrumental in future agricultural machinery design studies.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1997.11a
• /
• pp.3-31
• /
• 1997

Water has always played a significant role in the lives of people. In urbanised Rome, with its million people. sophisticated supply systems developed and then fled with the empire. only to be rediscovered later But it was the industrial Revolution commencing in the eighteenth century that ushered in major paradigm shifts In use and altitudes towards water. Rapid and concentrated urbanisation brought problems of expanded demands for drinking supplies, waste management and disease. The strategy of using water from local streams, springs and village wells collapsed under the onslaughts of rising urban demands and pollution due to poor waste disposal practices. Expanding travel (railways. and steamships) aided the spread of disease. In England. public health crises peaks, related to water-borne typhoid and the three major cholera outbreaks occurred in the late eighteenth and early nineteenth century respectively. Technological, engineering and institutional responses were successful in solving the public health problem. it is generally accepted that the putting of water into pipe networks both for a clean drinking supply, as well as using it as a transport medium for removal of human and other wastes, played a significant role in towering death rates due to waterborne diseases such as cholera and typhoid towards the end of the nineteenth century. Today, similar principles apply. A recent World Bank report Indicates that there can be upto 76％ reduction in illness when major water and sanitation improvements occur in developing countries. Water management, technology and thinking in Australia were relatively stable in the twentieth century up to the mid to late 1970s. Groundwater sources were investigated and developed for towns and agriculture. Dams were built, and pipe networks extended both for supply and waste water management. The management paradigms in Australia were essentially extensions of European strategies with the minor adaptions due to climate and hydrogeology. During the 1970s and 1980s in Australia, it was realised increasingly that a knowledge of groundwater and hydrogeological processes were critical to pollution prevention, the development of sound waste management and the problems of salinity. Many millions of dollars have been both saved and generated as a consequence. This is especially in relation to domestic waste management and the disposal of aluminium refinery waste in New South Wales. Major institutional changes in public sector water management are occurring in Australia. Upheveals and change have now reached ail states in Australia with various approaches being followed. Market thinking, corporatisation, privatisation, internationalisation, downsizing and environmental pressures are all playing their role in this paradigm shift. One casualty of this turmoil is the progressive erosion of the public sector skillbase and this may become a serious issue should a public health crisis occur such as a water borne disease. Such crises have arisen over recent times. A complete rethink of the urban water cycle is going on right now in Australia both at the State and Federal level. We are on the threshold of significant change in how we use and manage water, both as a supply and a waste transporter in Urban environments especially. Substantial replacement of the pipe system will be needed in 25 to 30 years time and this will cost billions of dollars. The competition for water between imgation needs and environmental requirements in Australia and overseas will continue to be an issue in rural areas. This will be especially heightened by the rising demand for irrigation produced food as the world's population grows. Rapid urbanisation and industrialisation in the emerging S.E Asian countries are currently producing considerable demands for water management skills and Infrastructure development. This trend e expected to grow. There are also severe water shortages in the Middle East to such an extent that wars may be fought over water issues. Environmental public health crises and shortages will help drive the trends.

• Conservation Science in Museum
• /
• v.13
• /
• pp.23-31
• /
• 2012

The object artifacts of this study are the iron artifacts owned by the Kyunghee University Central Museum. The surfaces of the iron artifacts are opaque due to the coated materials which are presumed to be paraffin or bee's wax while they are plate-shaped and exist in thickly exfoliated condition caused by severe corrosion developed on the overall surfaces. Therefore, in order to remove the coated materials away from the surfaces of the artifacts rather safely, reversibility tests have been carried out and the conservation treatment was performed upon the basis of and in application of the experimental results. The study methodologies are that: first, the FT-IR analysis was carried out to determine the ingredients of the coating-treated material on the surface; second, by applying various kinds of organic solvents, the kinds of agents that allow the artifact's surface-coating material to be reversible have been identified through experiments; third, the most suitable agent for removing coating material was selected and applied to the real artifacts on the basis of the results of the reversibility tests. Results from the study: first, as a result of the FT-IR analysis, the coating agent used on the artifacts was identified to be of the same ingredients as those of paraffin; second, among organic solvents, xylene, toluene, trichloroethylene and methyl alcohol were identified to be usable for dissolving paraffin whereas toluene was judged to be the most suitable for removing the coating agent; third, when applying the selected agents on the real artifacts, due to the fact that removing the whole paraffin might cause the artifact to disintegrate, the paraffin of only the part that covered the surfaces opaquely was removed using cotton swab or gauze, thus completing the conservation treatment.

• Korean journal of applied entomology
• /
• v.7
• /
• pp.5-13
• /
• 1969

Present system of seed potato production in Korea has several weak points and consequently has difficulties in covering annual shortage of 60,000 tons of seed potatoes. The author has an opinion that this so called 'High land system' of seed potato production adopted by the Government should be replaced by the 'Coastal area system' which is proposed by the author and has many advantages over present 'High land system'(2). In coastal areas where enormous acreage of rice paddies are spread, mostly around the villages. the primary host plants of the vectors are found. Therefore, the only source of aphid vectors are limited to the villages. The farmer's houses scattered more sparsely also have minor importance. In the previous paper(2), the author reported that the aphid vector populations were lower in the coastalareas than at Taegwanryong where the Alpine Experiment Station for the production. of seed potatoes is located. However, the number to vectors at Okku showed rather high density, where the trap was placed at the distance of 200 m from a village where peach and Hibiscus trees, the primary hosts of Myzus pesrsicae and Aphis gossypii were grown. To clarify the flight distance from the source of the aphid vectors, a trial was carried out in the Kwanghwal area, Kimje-gun, Cholla-pukto. on the western coast. 13 traps were placed at four directions and the distances between the traps were 250 m. (Fig. I) The traps 'Were operated from June 21 to October 31. The results are shown in Table 1. A total of some 70 species of aphids were found, including 5 speceis of potato virus vectors. The vectors are as follows: I. Myzus persicae (Sulzer) 2. Aphis gossypii Glover 3. Aulacorthum solani (Kaltenbach) 4. Lipaphis erysimi (Kaltenbach) 5. Macrosiphoniella sanborni (Gillette) Out of a total of 12,797 aphids, 5,187$(48\%)$ vectors were found. The trap catches at the 13 locations are shown in Fig. 2 and the numbers of the vectors at each location for each vector, except Macro-siphoniella sanborni. of which only a single individual was caught, are shown in Fig. 3-6. Number of vectors at C (3,279) (Centre of the village) is considerably higher than that at Suwon (763); however, EI. SI. WI and NI. where the distanecs from Care 250 m, showed lower numbers of vectors than that at Taegwanryong (347). The number of vectors at NI was rather than at the other 3 locations at the distance of 250m from the village. This was because C was in the southern part of the village. Consequently NI was much closer to the village than the other 3 locations of the same distance from C. Numbers of catches of the most important vector. Myzus persicae, are shown in Fig.3. The distribution pattern is typical except $S-2\;and\;W_3$, where several farmer's houses were found. If only the rice paddies were found in these locations. the numbers of the vectors would be small as the distances increase. Numbers of catches of the other 3 vectors are shown in Fig. 4-6. From these results. the author has drawn the following conclusions: 1. The aphid vector sources at the rice paddy belt in the western coast are the villages. 2. The vector densities at the locations where the distances are 250 m from the centre of the village are lower than that at Taegwanryong. 3. The vector densities become gradually lower as the distances from the centre of village increase. However. depending on the host plant situation at each location, the vector densities are variable. These minor sources of aphid vectors may be eliminated so that seed potatoes can be grown. 4. Thus. under the direction of specialists, fields suitable for seed potato production can be found in the coastal areas.