• Journal of Korea Multimedia Society
• /
• v.18 no.6
• /
• pp.742-752
• /
• 2015

The communications through the power lines are called as the PLC and this is a common name for the communication modes for the information delivery. This technology transmits the data through the power lines on which the information is stored with the form of high frequency signal. The characteristic of the frequency signal is that the signal can be separated from the power line through exclusive power line modem and transmitted to the terminal devices. In this paper, 'In-home Headcount' checking algorithm using Wi-Fi and taking above mentioned advantages is proposed, and the basic Technology for such Solitary Senior Citizen's Lonely Death monitoring system has been designed and implemented. The comparative analysis has been conducted in this paper with the test-operated and test bed-completed 'Hyosimi 119 Safety-Welfare System' which is still being tested since 2008. With the 'In-home Headcount Checking Algorithm', Wi-Fi connection/disconnection status and SSIDs of relevant Wi-Fis will be checked. We expect that our proposed method will become as the basic Technology which can prevent lonely deaths of elderly people living alone. Since the PLC technology can be normally implement all the functions used on internet anticipate that the technology could be applied to many areas to construct a new form of communication network.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.90-96
• /
• 2020

As various communication services have emerged due to the development of mobile communication technology, there is a need for a wideband antenna supporting multiple communication services with one antenna. In this paper, we propose a planar slot wideband antenna that can support all the communication services of 3.1~4.99GHz, the low frequency band of 5G, in addition to the existing communication services such as WiFi, LTE 2300/2500, and WiMAX. Through the simulation, the optimized antenna design parameters were obtained, and the antenna was fabricated to implement an antenna with a frequency bandwidth of 1.96~6.01GHz (S11 <-10dB) and presented the radiation pattern and gain of the antenna. The proposed antenna is a multi-band antenna that can provide all the services of LTE, Wifi, WiMAX, and 5G low frequency bands. It can be used as a repeater antenna in radio shadow area such as buildings, dense areas, and ships.

• Korean Journal of Agricultural Science
• /
• v.38 no.4
• /
• pp.753-759
• /
• 2011

Protected crop production has been popular in Korea as well as in other countries. Intensive and continuous monitoring and control of the environment, which is labor- and time-consuming, is critical for stable crop productivity and profitability, otherwise damage could be happened due to unfavorable ambient and soil conditions. In the study, potential utilization of smartphone and remote access application in protected crop production environment was investigated. Tested available remote access applications provided functions of mouse click (left and right buttons), zooming in and out, and screen size and color resolution control. Wi-Fi data communication speeds were affected by signal intensity and user place. Data speeds at high (> -55 dBm), medium (-70~-56 dBm), and low (< -71 dBm) signal intensity levels were statistically different (${\alpha}=0.05$). Means of data communication speed were 6.642, 4.923, and 2.906 Mbps at hot spot, home, and office, respectively, and the differences were significant at a 0.05 level. Smart phone and remote access application were applied successfully to remote monitoring (inside temperature and humidity, and outside precipitation, temperature, and humidity) and control (window and light on/off) of green house environment. Response times for monitoring and control were less than 1 s at all places for high signal intensity (> -55 dBm), but they were increased to 1 ~ 10 s at home and office and to 10 ~ 30 s at hot spot for low signal intensity (< -71 dBm) for Wi-Fi. Results of the study would provide useful information for farmers to apply these techniques for their crop production.

• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.536-542
• /
• 2021

In this paper, we proposed a triple band printed monopole antenna with a bent branch strips for WiFi / 5G. An antenna structure in which bent strips for generating multiple resonance are attached in the form of branches was newly proposed based on a typical monopole strip vertically erected as a triple band antenna structure. The proposed antenna is designed on a FR-4 substrate with dielectric constant 4.3, thickness of 1.6 mm, and size of 28×40 mm². The measured impedance bandwidth is 430 MHz (2.22~2.65 GHz) in the 2.4 GHz WLAN, 450 MHz (3.38~3.83 GHz) in the 3.5 GHz and 2390 MHz (4.95~7.34 GHz), In particular, it has been observed that antenna has a stable omnidirectional radiation patterns as well as gain of 1.537 dBi, 1.878 dBi and 2.337 dBi in the entire frequency band of interest.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.6
• /
• pp.223-229
• /
• 2023

This papart proposes single pole double throw (SPDT) switch with six-stage radial stub resonators in the 3.6~4.0 GHz band. The switch was simulated using ADS (Advanced Design Software), a design tool for the wireless communication circuits, and evaluated on a pcb substrate. The measurement results of the radial SPDT switch showed an average 90 dB isolation, and 1.5 dB insertion loss. This isolation characteristic was 20 dB superior to higher than those laboratory or commercial products reported thus far. The proposed SPDT switch is applicable to multi-band RF front-end systems, such as WiMAX, LTE/5G, Wi-Fi, and HyperLAN.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.233-237
• /
• 2008

This paper presents proposal for an application (only for Windows-based Mobile) that can synchronize the Third Generation Windows-based mobile with the prescribed server. This application can be used by mobile users to send information directly to the WAS server wirelessly. In this paper a comparison between Third Generation technology and WLAN ( both are parallel technologies first one embodied by IMT-2000 standards and the second one by ITU Standards) has been made and also a comparison between Wi-Fi and Bluetooth has been made.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.6
• /
• pp.1277-1282
• /
• 2011

Recently, many car drivers were damaged by gas station which support similar oil product and not quantitative gas. It were expected to increase above-mentioned damages. By using similar oil products, caused damage are working of lubrication in the fuel line, elf-cleaning function, the part of the early deterioration, impure accumulation in the fuel line, toxicity material in exhaust emissions and unidentified chemical reaction. To prevent these damages, proposed system use in-vehicle state data with OBD-II protocol, measure quantitative gas and similar oil. In this paper, there have implemented similar oil identification and quantitative gas system through OBD-II scanner to provide WiFi communcation by using WinCe development Board.

• Journal of KIISE
• /
• v.42 no.6
• /
• pp.807-816
• /
• 2015

The Internet of Things (IoT) has recently been showered with much attention worldwide. Various kinds of devices, communicating with each other in the IoT, demand multiple communication technologies to coexist. In this environment, mobile devices may utilize the vertical handover between different wireless radio interfaces such as Wi-Fi and Bluetooth, for efficient data transfer. In this paper, an IoT broker is implemented to support the vertical handover, which can also support and manage heterogeneous devices and communication interfaces. The handover is activated based on RSSI, Link Quality values, and real time traffic. The experimental results show that the proposed handover system substantially improves QoS in Bluetooth and reduces power consumption in mobile devices as compared with a system using only Wi-Fi.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.6
• /
• pp.37-42
• /
• 2022

Recently, with the development of mobile communication technologies such as 5G, interest in oscilloscope technology based on high bandwidth and user-friendly UI is increasing. In this paper, we proposed a Python-based UI(user interface) SW for a high-bandwidth digital oscilloscope in connection with the study of a 13GHz band digital oscilloscope system. The proposed UI SW is designed not only to be executed integrally with the oscilloscope, but also to be run on a separate PC or laptop cooperating with the instrument through WiFi communication. Functions of the UI SW consists of displaying and analyzing signal data, storing signal data in an external storage device, generating test signal data, and reconfiguring the toolbar. Finally, we have shown that the proposed digital oscilloscope system operates normally by interworking test with the signal generator.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.504-504
• /
• 2006