• 제목/요약/키워드: Wi-Fi 6E

검색결과 9건 처리시간 0.022초

WiFi와 mobile WiMax간 핸드오버 방안 (Handover Scheme between WiFi and Mobile WiMax)

  • 박승균
    • 한국콘텐츠학회논문지
    • /
    • 제11권1호
    • /
    • pp.34-41
    • /
    • 2011
  • 현재 무선 인터넷 접속 서비스는 3G 이동 통신 네트워크, mobile WiMAX, WiFi 등을 통해 언제 어디서든 이루어지고 있다. 다양한 무선 네트워크가 혼재해 있는 환경에서 사용자는 상황에 따라 네트워크를 선택할 수 있어야 하며 또한 동종 또는 이기종 네트워크간 이동성 지원도 필요로 하고 있다. 이러한 이유로, 서비스 지역이 가장 넓은 3G 네트워크를 주축으로 3G-mobile WiMAX(IEEE 802.16e)와 3G-WiFi(IEEE 802.11)에 대한 연동 방안들이 많이 연구되어 왔다. 그러나 최근 넷북, 전자책, 스마트폰 등의 등장과 함께 무선 인터넷 사용이 늘면서 mobile WiMAX와 WiFi 서비스 지역이 급속히 증가하고 있으며 특히 인터넷 전화 서비스와 같은 실시간 애플리케이션 사용이 가능해 짐에 따라 전통적인 음성 서비스를 하는 3G 이동 통신 네트워크의 비중은 점차 줄고 무선 인터넷 접속네트워크인 mobile WiMAX나 WiFi는 그 비중이 점차 커지고 있다. 따라서 본 논문에서는 mobile WiMAX와 WiFi간 이동성 지원과 핸드오버 지연을 최소화 하는 PMIPv6(Proxy Mobile IPv6) 기반의 핸드오버 방안을 제안한다. 제안한 방안에서 이동 노드(MN)는 WiFi와 mobile WiMAX 두 개의 인터페이스를 갖는 이중 스택 구조이며 WiFi가 이동성 지원을 하지 않으므로 기존 동종 네트워크간 핸드오버시 게이트웨이간 핸드오버 시그널링을 처리하는 기능을 이동 노드에 두도록 제안하고 있다. 동종 네트워크간 핸드오버와 비교해 제안된 핸드오버 방안은 해석적 평가를 통해 핸드오버 지연 및 전송 지연과 시그널링 오버헤드가 감소함을 보여준다.

Wi-Fi 6E 시스템에 적용 가능한 이중대역 주파수 선택표면 구조 설계 (Design of Dual-band Frequency Selective Surface Applicable to Wi-Fi 6E System)

  • 문윤석;조성실;홍익표
    • 전기전자학회논문지
    • /
    • 제27권1호
    • /
    • pp.71-77
    • /
    • 2023
  • 본 논문에서는 실내 무선랜 환경에서 인접한 동작 주파수 스펙트럼을 가진 외부 간섭신호를 차단하기 위해 Wi-Fi 6E 시스템에 적용할 수 있는 이중대역 차단 주파수 선택표면을 설계하였다. 제안한 주파수 선택적 표면 구조는 2.4GHz 대역과 6GHz 대역에서 주파수 차단 특성을 가지며, 변형된 교차 쌍극자 구조와 단위 구조간 서로 맞물린 퍼즐 형태를 통해 구현되었다. 제안한 구조는 입사각과 편파에 대해 안정적인 주파수 응답 특성을 갖도록 설계되었으며, 제작 및 실험으로부터 0°~45°의 입사파에 대해 시뮬레이션에서 얻은 결과와 잘 일치하는 것을 확인하였다.

6GHz 대역용 패치 안테나 연구 (A Study of Patch Antenna for 6GHz)

  • 박용욱
    • 한국전자통신학회논문지
    • /
    • 제17권6호
    • /
    • pp.1063-1068
    • /
    • 2022
  • 인터넷이 보급된 이후로 우리 사회는 정보화시대에 진입하게 되었고, 인터넷도 유선인터넷에서 무선인터넷으로 변화하게 되었다. 무선인터넷의 수요가 급증하게 되면서 이전에 Wi-Fi에 이용하던 2.4 및 5GHz 대역의 인터넷 통신은 포화상태에 도달하게 되어 성능과 속도가 급속히 저하하게 되었다. 따라서 속도가 증가된 Wi-Fi 6E에 사용되는 6GHz 대역의 통신이 주목을 받게 되었다. 본 연구에서는 6GHz 대역에서 사용 가능한 패치형 마이크로스트립 안테나를 HFSS(High Frequency Structure Simulator)를 사용하여 특성을 분석하고 안테나를 설계하였다. 설계된 안테나를 유전율 4.4의 FR4 기판을 이용해 안테나를 제작하고, 회로망 분석기를 사용하여 제작된 6GHz 대역용 패치 안테나 동작 특성을 분석하였다.

DGS를 갖는 Wi-Fi 6E 대역을 위한 삼중대역 WLAN 안테나 설계 및 제작 (Design and fAbrication of Triple Band WLAN Antenna Applicable to Wi-Fi 6E Band with DGS)

  • 박상욱;변기영;윤중한
    • 한국전자통신학회논문지
    • /
    • 제19권2호
    • /
    • pp.345-354
    • /
    • 2024
  • 본 논문에서는 WLAN 시스템에 활용 할수 있도록 DGS를 적용하여 삼중대역 안테나를 제안하였다. 제안된 안테나는 두 개의 스트립 선로와 접지면에 세 개의 영역을 삽입하여 요구하는 주파수 대역과 반사손실 특성을 얻었다. 제안된 안테나는 22.0 mm(W) × 54.9 mm(L1)의 크기와 두께(h) 1.6 mm, 그리고 비유전율이 4.4인 FR-4 기판 위에 22 mm(W6+W4+W5) × 43 mm(L1+L2+L3+L5)의 크기로 설계되었다. 제작 및 측정결과로부터, -10dB 기준으로 900 MHz 900 MHz 대역에서 108 MHz (0.908~1.016 GHz), 2.4 GHz 대역에서 360 MHz (2.276~2.636 GHz), 그리고 5.0/6.0 GHz 대역에서 2,484 MHz (4.904~7.388 GHz)의 대역폭을 얻었다. 또한 요구되는 주파수 삼중대역에서 이득과 방사패턴 특성을 측정하여 나타내었다.

무선 데이터 전송과 웹 로깅 시스템 설계 (Design of Wireless Data Transmission and Web Logging System)

  • 노재성
    • 한국항행학회논문지
    • /
    • 제22권6호
    • /
    • pp.636-641
    • /
    • 2018
  • 최근 수년간 사물인터넷 기술은 급격히 발달하고 있으며 많은 분야에서 활용되고 있다. 사물인터넷 디바이스의 기능은 다양한 환경에서 정보를 수집하는 것이며 사용자에게 유용한 정보를 제공하여야 한다. 최근에는 사물인터넷 디바이스의 종류가 증가하고 있으며 가격도 저렴해지고 있다. 또한 사용하기 쉬운 오픈 소스 플랫폼들이 많이 개발되어 사용자에게 편의를 제공하고 있다. 본 논문에서는 ESP-12E NodeMCU 모듈 기반의 무선 데이터 전송 및 클라우드 서버 시스템을 설계하였으며 사물인터넷 디바이스에서 수집된 센서 정보는 WiFi 무선통신을 통하여 클라우드 서버에 전송하였다. 수집된 센서 데이터는 클라우드 서버에서 채널과 필드를 생성하여 저장되며 각 필드의 데이터를 그래프로 시각화하였다.

IEEE 802.11 ax optimization design study in XR (eXtended Reality) training room

  • Chae, Yeon Keun;Chae, Myungsin
    • International Journal of Advanced Culture Technology
    • /
    • 제10권1호
    • /
    • pp.253-264
    • /
    • 2022
  • In the era of the pandemic, the importance of a wireless LAN environment has become increasingly important, especially as the era of smart working and non-face-to-face education has become a universal and daily routine. Smartphones, tablets, laptops, PCs, smart watches, and wearable devices, collective referred to as wireless terminals, can be accessed anytime and anywhere through the internet, allowing for consistent and constant access to offices, factories, warehouses, shopping malls, railways, hotels, hospitals, schools, logistics centers, airports, exhibition halls, etc. This sort of access is currently being used in roads, parks, traditional markets, and ports. Since the release of the IEEE 802.11 Legacy Standard in 1997, Wi-Fi technology has been continuously supplemented and revised, and the standard has been continuously developed. In the era of smart working, the importance of efficient wireless deployment and scientific design has become more important. The importance of wireless in the smart factory, in the metaverse era, in the era of pursuing work and life that transcend time and space by using AR, VR, MR, and XR, it is more urgent to solve the shadow area of Wi-Fi. Through this study, we intend to verify the wireless failure problem of the xr training center and suggest improvement measures.

에지를 가진 평면 모노폴 안테나의 무선랜 대역 저지에 관한 연구 (A Study on Notched Wi-Fi Bandwidth of Planar Monopole Antenna with Edge)

  • 이윤민;이재춘
    • 디지털산업정보학회논문지
    • /
    • 제9권4호
    • /
    • pp.43-49
    • /
    • 2013
  • In this paper, it is designed inverted triangle structural planar monopole antenna with edge and rectangle slot for UWB(Ultra Wide Band) communication (3.1~10.6 GHz) and researched in about 5.8 GHz notch structure to prevent interference between UWB systems and existing wireless systems for using Wi-Fi service. The antenna have broadband property structurally through inverted triangle structural planar monopole which have edge. and rectangle form addition planned notch slot of 1 mm and height 0.1 mm. Monopole and ground of proposed antenna exist on coplanar plane, and excite as CPW. It used FR4 epoxy dielectric substrate of ${\varepsilon}r$=4.4, and the size is $20{\times}20{\times}1.6$ mm dimension. The measured results that are obtained return loss under -10 dB through 3.1~10.6 GHz(7.5 GHz) without Wi-Fi bandwidth and maximum gain of 8.44 dBi at E-plane. Radiation pattern is about the same that of dipole antenna at all frequency. And using notch slot and it will be able to confirm the quality which becomes notch from 5.8 GHz which are a radio LAN frequency range.

Design, Fabrication and Measurement of a Compact, Frequency Reconfigurable, Modified T-shape Planar Antenna for Portable Applications

  • Iqbal, Amjad;Ullah, Sadiq;Naeem, Umair;Basir, Abdul;Ali, Usman
    • Journal of Electrical Engineering and Technology
    • /
    • 제12권4호
    • /
    • pp.1611-1618
    • /
    • 2017
  • This paper presents a compact reconfigurable printed monopole antenna, operating in three different frequency bands (2.45 GHz, 3 GHz and 5.2 GHz), depending upon the state of the lumped element switch. The proposed multiband reconfigurable antenna is designed and fabricated on a 1.6 mm thicker FR-4 substrate having a relative permittivity of 4.4. When the switch is turned ON, the antenna operates in a dual band frequency mode, i.e. WiFi at 2.45 GHz (2.06-3.14 GHz) and WLAN at 5.4 GHz (5.11-5.66 GHz). When the switch is turned OFF, it operates only at 3 GHz (2.44-3.66 GHz). The antenna radiates omni-directionally in these bands with an adequate, bandwidth (>10 %), efficiency (>90 %), gain (>1.2 dB), directivity (>1.7 dBi) and VSWR (<2). The fabricated antenna is tested in the laboratory to validate the simulated results. The antenna, due to its reasonably compact size ($39{\times}37mm^2$), can be used in portable devices such as laptops and iPads.

AIMS 시스템에서 플로우 이동성 기법의 설계와 검증 (Design and Verification of Flow Mobility Scheme tn the AIMS System)

  • 이성근;이경희;민성기;이효범;이현우;한연희
    • 한국통신학회논문지
    • /
    • 제36권7B호
    • /
    • pp.760-770
    • /
    • 2011
  • 기존 이동성 관리 기법들은 IP 기반의 코어 네트워크와 다양한 접근 네트워크를 수용하는 차세대 네트워크에서 활용하기에는 부족한 점이 많다. 현재 ETRI에서는 차세대 네트워크에서의 이동성 관리에 관한 ITU-T 요구사항을 만족시키는 AIMS (Access Independent Mobility Service) 시스템을 개발 중에 있다. AIMS 시스템은 차세대 네트워크에서 이종망간의 이동성 관리에 우수한 성능을 지닌다. 한편, 최근에 많이 활용되는 사용자 단말은 여러 개의 통신 인터페이스를 지니고 있어서 Wi-Fi와 3G와 같은 서로 다른 여러 네트워크에 동시에 접속할 수 있다. 본 논문에서는 AIMS 시스템에서 이동성 지원을 받는 단말들이 여러 네트워크에 동시에 접속할 경우 접속 네트워크 기술 간에 선택적으로 데이터 플로우를 이동시킬 수 있는 플로우 이동성(flow mobility) 기법을 설계하고 NS-3 시뮬레이션 구현을 통하여 제안 기법을 검증한 결과를 제시한다. 또한, 시뮬레이션 수행 결과를 통하여 제안 기법이 다양한 접근 네트워크를 지닌 이동 네트워크에서 네트워크의 지원을 보다 효율적으로 활용하게 함을 입증한다.