• The Journal of the Korea Contents Association
• /
• v.11 no.1
• /
• pp.34-41
• /
• 2011

At present wireless internet access service is available through the 3G network, mobile WiMAX and WiFi anytime and anywhere. In this environment where there are various networks, users should be able to select specific networks depending on different situations. And it is necessary to provide mobility support between homogeneous and between heterogenous networks. Given this situation, the many proposals have been presented to link 3G, which has the largest service area among various networks, with mobile WiMAX(IEEE 802.16e), or with WiFi(IEEE 802.11). But, recently, with the increasing volume of wireless internet use and wireless internet data, due to the advents of net-book, e-book and smart phone, the service area of WiFi and mobile WiMAX has rapidly expanded. Especially, the availability of real-time application such as internet phone has led to the relative shrinking of the proportion of 3G mobile communication network giving conventional voice service, and enlargement of those of wireless internet access networks like WiFi and mobile WiMAX. This paper suggests a handover scheme based on PMIPv6, whitch support mobility between WiFi and mobile WiMAX, and minimizes handover delay. In this scheme, the mobile node has a dual stack structure composed of two interfaces-WiFi and mobile WiMAX. Since WiFi dose not support mobility, it is suggested that the mobile node have the capacity to deal with handover signaling between gateway in case of handover between homogeneous networks. This handover scheme, suggested comparing with current handovers between homogeneous networks, has proved, in its analytic evaluation, to be able to reduce handover, transmission, and signaling overhead.

• Journal of IKEEE
• /
• v.27 no.1
• /
• pp.71-77
• /
• 2023

In this paper, a dual-band stopband frequency selective surface that can be applied to Wi-Fi 6E systems is designed to block external interfering signals with adjacent operating frequency spectrum in indoor wireless LAN environments. The proposed frequency selective surface structure has frequency blocking characteristics in the 2.4GHz and 6GHz bands, and is realized through a modified crossed dipole structure and an interlocking puzzle form between unit structures. The proposed structure is designed to have stable frequency response characteristics with respect to incident angle and polarization, and the experimental results show good agreement with the simulation results for incident waves from 0° to 45°.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1063-1068
• /
• 2022

The modern society has become entry into the information age after the spread of Internet. In the information age, internet was developed from the wired access to the wireless Internet access. When a surge in demand for wireless Internet access, performance and speed of 2.4 and 5GHz band for Wi-Fi which leads to saturation of the communication was significantly fall. Accordingly, the communication of the 6GHz band for Wi-Fi 6E came to be interested. In this paper, we studied the design and fabrication of microstrip patch antenna to be used in wireless communication systems operating at around 6GHz band. To obtain antenna parameters such as patch size, inter patch space, antenna was simulated by HFSS(High Frequency Structure Simulator). From these parameters, slot microstrip patch antenna is fabricated using FR-4 of dielectric constant 4.4. The characteristics of fabricated patch type microstrip antenna were analyzed by network analyzer.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.2
• /
• pp.345-354
• /
• 2024

In this paper, we propose a triple band WLAN antenna for Wi-Fi 6E band with DGS. The proposed antenna has the characteristics required frequency band and bandwidth by considering the interconnection of two strip lines and three areas on the ground place. The total substrate size is 31 mm (W) × 50 mm (L), thickness (h) 1.6 mm, and the dielectric constant is 4.4, which is made of 22 mm (W₆ + W₄ + W₅) × 43mm (L₁ + L₂ + L₃ + L₅) antenna size on the FR-4 substrate. From the fabrication and measurement results, bandwidths of 340 MHz (1.465 to 1.805 GHz) for 900 MHz band, 480 MHz (2.155 to 2.635 GHz) for 2.4 GHz band and 1950 MHz (4.975 to 6.925 GHz) for 5.0/6.0 GHz band were obtained on the basis of -10 dB. Also, gain and radiation pattern characteristics are measured and shown in the frequency triple band as required.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.636-641
• /
• 2018

In recent years, the Internet of things has grown rapidly and is being used in many fields. The function of an Internet device isto collect information in various environments and to provide useful information to users. Due to recent developments in technology, the kinds of Internet devices are increasing and the prices are getting cheaper. In addition, many open source platforms that are easy to use have been developed and are providing convenience to users. In this paper, wireless data transmission and cloud server system based on ESP-12E NodeMCU module was designed and sensor information collected from Internet devices was transmitted to cloud server through WiFi wireless communication. The collected sensor data was saved by creating channel and field in the cloud server and the data of each field was visualized as a graph.

• International Journal of Advanced Culture Technology
• /
• v.10 no.1
• /
• pp.253-264
• /
• 2022

In the era of the pandemic, the importance of a wireless LAN environment has become increasingly important, especially as the era of smart working and non-face-to-face education has become a universal and daily routine. Smartphones, tablets, laptops, PCs, smart watches, and wearable devices, collective referred to as wireless terminals, can be accessed anytime and anywhere through the internet, allowing for consistent and constant access to offices, factories, warehouses, shopping malls, railways, hotels, hospitals, schools, logistics centers, airports, exhibition halls, etc. This sort of access is currently being used in roads, parks, traditional markets, and ports. Since the release of the IEEE 802.11 Legacy Standard in 1997, Wi-Fi technology has been continuously supplemented and revised, and the standard has been continuously developed. In the era of smart working, the importance of efficient wireless deployment and scientific design has become more important. The importance of wireless in the smart factory, in the metaverse era, in the era of pursuing work and life that transcend time and space by using AR, VR, MR, and XR, it is more urgent to solve the shadow area of Wi-Fi. Through this study, we intend to verify the wireless failure problem of the xr training center and suggest improvement measures.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.4
• /
• pp.43-49
• /
• 2013

In this paper, it is designed inverted triangle structural planar monopole antenna with edge and rectangle slot for UWB(Ultra Wide Band) communication (3.1~10.6 GHz) and researched in about 5.8 GHz notch structure to prevent interference between UWB systems and existing wireless systems for using Wi-Fi service. The antenna have broadband property structurally through inverted triangle structural planar monopole which have edge. and rectangle form addition planned notch slot of 1 mm and height 0.1 mm. Monopole and ground of proposed antenna exist on coplanar plane, and excite as CPW. It used FR4 epoxy dielectric substrate of ${\varepsilon}r$=4.4, and the size is $20{\times}20{\times}1.6$ mm dimension. The measured results that are obtained return loss under -10 dB through 3.1~10.6 GHz(7.5 GHz) without Wi-Fi bandwidth and maximum gain of 8.44 dBi at E-plane. Radiation pattern is about the same that of dipole antenna at all frequency. And using notch slot and it will be able to confirm the quality which becomes notch from 5.8 GHz which are a radio LAN frequency range.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1611-1618
• /
• 2017

This paper presents a compact reconfigurable printed monopole antenna, operating in three different frequency bands (2.45 GHz, 3 GHz and 5.2 GHz), depending upon the state of the lumped element switch. The proposed multiband reconfigurable antenna is designed and fabricated on a 1.6 mm thicker FR-4 substrate having a relative permittivity of 4.4. When the switch is turned ON, the antenna operates in a dual band frequency mode, i.e. WiFi at 2.45 GHz (2.06-3.14 GHz) and WLAN at 5.4 GHz (5.11-5.66 GHz). When the switch is turned OFF, it operates only at 3 GHz (2.44-3.66 GHz). The antenna radiates omni-directionally in these bands with an adequate, bandwidth (>10 %), efficiency (>90 %), gain (>1.2 dB), directivity (>1.7 dBi) and VSWR (<2). The fabricated antenna is tested in the laboratory to validate the simulated results. The antenna, due to its reasonably compact size ($39{\times}37mm^2$), can be used in portable devices such as laptops and iPads.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7B
• /
• pp.760-770
• /
• 2011

The existing mobility management schemes do not fully support the next generation network, which is composed of IP-based core network and various access networks. Currently, ETRI has been developing the AIMS (Access Independent Mobility Service) system which satisfies the ITU-T requirements of mobility management in the next generation network. The AIMS system is designed to provide a mobile host with a fast and reliable mobility service among heterogeneous access networks. Recently, many user devices have multiple communication interfaces, e.g., 3G and WLAN, and thus they can make two or more network connections at the same time. In this paper, we design a scheme of flow mobility, i.e., the movement of selected data flows from one access technology to another, to be applied in the AIMS system, and verify the proposed scheme through the NS-3 simulation study. From the simulation results, we can know that the proposed flow mobility scheme can utilize the network resource efficiently in the heterogeneous mobile networks.