• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1407-1410
• /
• 2007

This work reports on three primary color fluorescent white organic light emitting diode (WOLED) with simple device structure where only a part of the hole transporting layer was doped with dye. The maximum luminance of the device reaches $35000\;cd/m^2$ at a drive voltage below 11V and external quantum efficiency of the device is above 1% in the wide range of luminance from 10 to $35000\;cd/m^2$ and reaches its highest 1.6% at $500\;cd/m^2$. The chromaticity coordinate shift of the device is negligible in this wide range of luminance. The blue shift of emission color with an increase of current density was attributed to the narrowing of recombination zone width with raise of current density.

• Journal of Plant Biotechnology
• /
• 제41권1호
• /
• pp.44-49
• /
• 2014

In this study, we investigated the effects of sodium hypochlorite (NaOCl) and red or blue light-emitting diode (LED) light on embryo swelling and germination of Oreorchis patens (Lindl.) Lindl. A method for determining the swelling and protocorm formation in O. patens seeds through in vitro examination of immature seeds was established. NaOCl treatment of immature seeds was found to significantly enhance the extent of embryo swelling and protocorm formation in immature zygote embryos compared to those in the untreated controls. Additionally, the effects of white fluorescent light, and red and blue LED lights on embryo swelling and protocorm formation in in vitro cultured seeds were examined and compared to the conditions with or without NaOCl treatment. The most suitable light for embryo swelling and protocorm formation was the red LED light.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제37회 하계학술대회 초록집
• /
• pp.416-416
• /
• 2009

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제37회 하계학술대회 초록집
• /
• pp.383-383
• /
• 2009

• 한국고분자학회지:고분자과학과기술
• /
• 제21권4호
• /
• pp.309-313
• /
• 2010

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권6호
• /
• pp.830-837
• /
• 2016

The purpose of this study was to investigate the effect of monochromic light-emitting diode (LED) light with different color on the growth and reproductive performances of white Roman breeder geese. A randomized complete batch design was utilized for the trial, and the replicate was regarded as one batch. Twenty ganders and fifty-five dames were used in batch 1 (started on 2011/6/17 and ended on 2012/1/31), thirty ganders and eighty-four dames were used in batch 2 (started on 2012/3/23 and ended on 2012/10/26), and thirty ganders and seventy-two dames were used in batch 3 (started on 2013/3/12 and ended on 2013/12/20). Two hundred and ninety-one geese were randomly assigned to 6 rooms in an environmentally controlled house. They were randomly allotted into one of three monochromatic light treatments: Blue, red, or white. The results showed that there was no significant difference in body weight among the three lighting groups at any point throughout the experimental period. However, compared to the blue light group, significantly more eggs were produced by the red and white light groups (p<0.05). Furthermore, the laying period of the red light group was significantly longer than that of other two groups (p<0.05). In conclusion, our results suggested that red LED-light has the best effect on reproductive performance (i.e. longer laying period and higher total eggs number) at 30 lux light intensity, and is therefore a better choice for the management of breeding geese than blue or white LED-light.

• 조명전기설비학회논문지
• /
• 제18권3호
• /
• pp.20-26
• /
• 2004

본 논문에서는 조명용 고휘도(HB, high brightness) 백색 LED(light emitting diode)램프의 배열 및 여러 가지 등기구 글로브(globe)의 형태에 따른 광도(luminous intensity)값과 기구효율(luminaire efficiency)을 컴퓨터 시뮬레이션으로 수행하여 비교분석 하였다. 즉, LED의 배열은 가로${\times}$세로(7개${\times}$7개)가 정사각형 형태로 49개를 배열하고, LED 간격은 LED의 발광면 중심부로부터 8.2[mm], 10.0[mm], 15.0[mm]로 각각 3가지로 하였으며, 등기구의 글로브는 LED발광면 중심부에서 30[mm], 50[mm] 떨어진 거리로 구분하였다. 또한 등기구 글로브가 없을 때와 있을때로 구분하여 있을 때에는 글로브 형태를 볼록 원형과 엠보(embossing)형태로 구분하고 엠보는 8.2[mm], 5.0[mm]의 크기에 따른 선택으로 시뮬레이션 27가지로 수행하여 등기구의 글로브 형태에 따른 광도 및 기구효율을 고찰해 봄으로써 앞으로 21세기 디지털조명이라고 일컫는 LED를 사용한 LED 광원(light source) 및 등기구 개발에 많은 도움이 되고자 하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.736-739
• /
• 2002

We report on white light emission from a light emitting diode(LED) prepared by blending a red emitting copolymer, m-SiPh PPV-co-MEH PPV, and a blue emitting polyvinylcarbazole (PVK). White light emission was realized when the weight ratio of the m-SiPh PPV-co-MEH PPV : PVK equals to 1 : 30, in which the commission Internationale de L'Eclairage coordinates were x=0.3266 and y=0.3438.

• 한국산학기술학회논문지
• /
• 제12권10호
• /
• pp.4590-4599
• /
• 2011

컬러 시프트 현상은 다양한 색상을 생성하는 유기발광다이오드 소자에 있어서 발광 색상의 순도를 저하시키는 주요 원인으로 작용되어지고 있다. 본 연구에 적용한 유기발광다이오드 소자의 기본 구조는 ITO/${\alpha}$-NPD/$Alq_3$:DCJTB [wt%]/$Alq_3$/Mg:Ag로 구성되어지며, 컬러 시프트가 일어나는 메커니즘을 규명하기 위하여 유기발광다이오드 소자 내에서의 전기광학적인 특성 요인들을 수치 해석하였다. 또한 DCJTB[wt%]의 도핑 농도 비율을 변화시켜 가면서 컬러 시프트의 원인을 조사하였다. 그 결과, 발광층과 정공 수송층의 경계면에서 발생되어지는 호스트에 트랩된 전자들과 자유 정공들 그리고 게스트에 트랩된 정공들과 자유 전자들에 의한 재결합율의 변화가 컬러 시프트 현상의 주요 요인들 중의 하나임을 확인하였다.

• 마이크로전자및패키징학회지
• /
• 제18권4호
• /
• pp.79-83
• /
• 2011

White phosphorescence polymer light emitting diodes (WPhPLEDs) with a glass/ITO/PEDOT:PSS/PFO:$Ir(ppy)_3$:MDMO-PPV/TPBI/LiF/Al structure were fabricated to investigate the effects of $Ir(ppy)_3$ doping concentrations on the optical and electrical properties of the devices. PFO, $Ir(ppy)_3$ and MDMO-PPV conjugated polymers as host and guest materials in the emission layer were spin coated at various concentrations of $Ir(ppy)_3$ ranging from 0.0 to 20.0 vol.%. As the concentration of $Ir(ppy)_3$ increased from 5.0 to 20.0 vol.%, the luminance and current efficiency values of the devices decreased clearly, which are attributable to the quenching effect at a high doping concentration. The maximum luminance and current density were 2850 $cd/m^2$ and 741 $mA/cm^2$, respectively for a WPhPLED with an $Ir(ppy)_3$ concentration of 5.0 vol.%. The CIE color coordinates were about x=0.33 and y=0.34 at 11V, showing a good white color.