• Korean Journal of Materials Research
• /
• v.16 no.12
• /
• pp.761-765
• /
• 2006

[ $II-III_2-(S,Se)_4$ ] structured of phosphor has been used at various field because those have high luminescent efficiency and broad emission band. Among these phosphors, the europium doped $BaGa_2S_4$ was prepared by solid-state method and had high potential application due to an emissive property of UV region. Also, the common sulfide phosphors were synthesized by using injurious $H_2S\;or\;CS_2$ gas. However, in this study $BaGa_2S_4:Eu^{2+}$ phosphor in addition to excess sulfur was prepared under at 5% $H_2/95%\;N_2$ reduction atmosphere. Thus, this process could be considered as large scale synthesis because of non-harmfulness and simplification. The photoluminescence efficiency of the prepared $BaGa_2S_4:Eu^{2+}$ phosphor increased 20% than that of commercial $SrGa_2S_4:Eu^{2+}$ phosphor. The prepared $BaGa_2S_4:Eu^{2+}$ could be applied to green phosphor for white LED of three wavelengths.

• Journal of Plant Biotechnology
• /
• v.41 no.2
• /
• pp.94-99
• /
• 2014

This study was conducted to elucidate the effect of light sources and explant types on in vitro shoot multiplication and rooting of a rare and endangered plant Abeliophyllum distichum. Both apical buds and axillary buds were used as explants under 4 different light sources, cool white florescent light (F), 100% blue light-emitting diode (LED) (B), 50% blue and 50% red LED mixture (BR), and 100% red LED (R). Clear difference was observed in terms of shoot proliferation by light sources types but not by position-dependent explant types. Multiple shoot induction rates were enhanced under both B and BR light sources. Spontaneous rooting was induced in shoot induction medium under B light source. Both the rates of rooting and numbers of roots per explant were higher in apical bud explants compared to axillary bud explants. Interestingly R light source stimulated shoot elongation but inhibited root development. Therefore, our results suggest that the use of apical bud explants under B or BR light sources is suitable for in vitro micropropagation of a rare and endangered plant species, Abeliophyllum distichum.

• Korean Institute of Interior Design Journal
• /
• v.21 no.6
• /
• pp.129-136
• /
• 2012

As the importance of eco-friendly and energy saving issues are emphasized in lighting as consciousness about energy saving is elated worldwide, demand for natural resources such as gas increases, supply of LED lighting is spread. Owing to white LED's development and price fall. It is expected to LED High Luminance Emitting Diode. LED's brightness and long life-time that surpass fluorescent light in the latest as well as is used by back light source of thin film LCD, low electric power attrition rate by advantage do and widen the market at the world lighting lamp market that is potential market. Accordingly, study about suitability of LED lighting is activated but space that apply actual LED lighting fixtures yet is less and advanced researches about LED fixtures' applied apaces are slight compared to existing light source up to now because is not many on this. The result of the experiment shows similar tendency with the existing light sources'. Through a psychological reaction experiment in the LED lighting experiencing space that can control of color temperature and lighting level, this study is wished to use to the data for lighting design of space that LED lighting fixtures are applied hereafter.

• Korean Journal of Medicinal Crop Science
• /
• v.25 no.1
• /
• pp.37-44
• /
• 2017

Background: The light emitting plasma (LEP) has recently attracted attention as a novel artificial light source for plant growth and functional component enhancement. We investigated the effects of LEP on whitening and antioxidant activities of the plant parts of perilla. Methods and Results: Previously germianted seeds of perilla were cultivated under different light conditions (fluoresce lamp, LED red, blue, white, green, and LEP) in a culture room for 2 months. Parts of perilla were harvested and extracted in 70% EtOH. The extracts were used to detect total phenolic contents, total flavonoid contents, 2,2-diphenyl-1-picrylhydrazyl (DPPH), 2,2'-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS), reducing power and tyrosinase inhibition activity as indicators of biological activity. Biological activity was highest in seedlings grown under LEP. The total phenolic content was highest in the stems and the total flavonoid content was highest in the roots of perilla exposed to LEP. The DPPH and ABTS radical activity in all the parts of perilla exposed to LEP were higher by approximately three-fold compared to that in the control (fluoresce lamp). The reducing power values of perilla significantly increased after treatment with LEP. In addition, all the extract of perilla plants exposed to LEP promoted the tyrosinase inhibitory activity. These results suggest that LEP can be an important artificial light source for enhancement of biological activity. Conclusions: LEP could promote whitening and antioxidant activity of perilla.

• Journal of Life Science
• /
• v.29 no.3
• /
• pp.311-317
• /
• 2019

To investigate the effects of light on growth in fish, olive flounder (Paralichthys olivaceus) were reared under four kinds of monochromatic light-emitting diodes (LEDs) at violet (400 nm), blue (465 nm), green (508 nm), and red (635 nm) wavelengths, along with a white fluorescent lamp as control. The rearing experiments were carried out with 15 fish per tank under different wavelength illumination at the same intensity. After rearing the fish under a 12 hr:12 hr light:dark photoperiod for 60 days, percentage increases in weight gain of $269.92{\pm}13.02$, $363.21{\pm}3.74$, $433.22{\pm}4.83$, $290.17{\pm}11.83$, and $340.74{\pm}26.58%$ and increases in specific growth rates (SGR) of $2.18{\pm}0.06$, $2.56{\pm}0.07$, $2.79{\pm}0.01$, $2.27{\pm}0.05$, and $2.47{\pm}0.10$ were observed in fish grown under the illumination of red, blue, green, and violet LEDs and the white fluorescent light, respectively. The results show faster growth in fish reared under green LEDs, but slower growth in those reared under red light. Differences in most blood parameters were minor, aside from an increased level of glutamic oxaloacetic transaminase in the fish grown under red LED illumination. Histological analysis of the retina showed few changes in the ratio of photoreceptor layer thickness to total retina thickness in fish reared under the green LEDs compared to those in other illumination groups. These results indicate that green LED light can foster increased growth in olive flounder with no distinct harmful effects on their light-sensitive photoreceptor layers.

• Advances in robotics research
• /
• v.2 no.2
• /
• pp.141-149
• /
• 2018

In image processing and robotic applications, two-dimensional (2D) black and white patterned planar markers are widely used. However, these markers are not detectable in low visibility environment and they are not changeable. This research proposes an active and adaptive marker node, which displays 2D marker patterns using light emitting diode (LED) arrays for easier recognition in the foggy or turbid underwater environments. Because each node is made to blink at a different frequency, active LED marker nodes were distinguishable from each other from a long distance without increasing the size of the marker. We expect that the proposed system can be used in various harsh conditions where the conventional marker systems are not applicable because of low visibility issues. The proposed system is still compatible with the conventional marker as the displayed patterns are identical.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.2
• /
• pp.25-31
• /
• 2009

The image processing methods are widely used in many industrial fields to detect defections in inspection devices. In this study an image processing method was conducted for the detection of abnormal pixels in a OLED(Organic Light Emitting Diode) type panel which is used for small size displays. The display quality of an OLED device is dependent on the pixel formation quality. So, among the so many pixels, to find out the faulty pixels is very important task in manufacturing processing or inspection division. We used a line scanning type BW(Black & White) camera which has very high resolution characteristics to acquire an image of display pixel patterns. And the various faulty cases in pixel abnormal patterns are considered to detect abnormal pixels. From the results of the research, the normal BW pixel image could be restored to its original color pixel.

• ETRI Journal
• /
• v.34 no.5
• /
• pp.727-733
• /
• 2012

This paper demonstrates a new driving scheme that allows reducing the supply voltage of data drivers for low-power active matrix organic light-emitting diode (AMOLED) displays. The proposed technique drives down the data voltage range by 50%, which subsequently diminishes in the peak power consumption of data drivers at the full white pattern by 75%. Because the gate voltage of a driving thin film transistor covers the same range as a conventional driving scheme by means of a level-shifting scheme, the low-data supply scheme achieves the equivalent dynamic range of OLED currents. The average power consumption of data drivers is reduced by 60% over 24 test images, and power consumption is kept below 25%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.424-424
• /
• 2013

Ce3+, Sm3+, Eu3+, Tb3+ 등 희토류를 도핑한 여러 종류의 형광체는 백색 LED (white light-emitting diode), 전계방출표시소자(field emission display), 플라즈마디스플레이패널(plasma display panel), 약물 운송(drug delivery) 등 다양한 분야에서 응용되고 있다. 최근에는 졸-겔 방법(sol-gel method)을 이용하여Y2SiO5, Y3-XGdxAl5O12, SrAl2O4 등 여러 종류의 호스트 물질을 합성하여 형광체의 특성을 분석하는 연구가 활발히 진행되고 있다. 이러한 졸-겔 방법은 비교적 낮은 온도에서 간단한 공정으로 좋은 균질성과 높은 생산성을 갖도록 형광체를 제작할 수 있는 장점을 가지고 있다. 이에 본 연구에서는 졸-겔 방법을 이용하여 BaGd2TiO13구조를 제작하였고, 이러한 구조적, 광학적 특성을 분석하기 위하여 열분석기(thermal analyzer), 전계방출형주사전자현미경(field emission scanning electron microscopy), 투과전자현미경(field emission transmission electron microscopy)을 이용하였다. 이러한 졸-겔 방법을 이용하여 제작한 BaGd2TiO13 구조의 형광체 적용 연구를 통한 디스플레이 및 백색 LED 응용에 유용할 것으로 기대된다.

• Applied Science and Convergence Technology
• /
• v.23 no.3
• /
• pp.139-144
• /
• 2014

GaN deposition equipment and processes for the fabrication of white LEDs (Light Emitting Diode) using MOCVD (Metal Organic Chemical Vapor Deposition) were numerically modeled to analyze the effects of a reactive gas introduction strategy. The source gases, TMGa and $NH_3$, were injected from a shower head at the top of the chamber; the carrier gases, $H_2$ or $N_2$, were introduced using two types of injection structures: vertical and horizontal. Wafers sat on the holder at a radial distance between 100 mm and 150 mm. The non-uniformity of the deposition rates for vertical and horizontal injection were 4.3% and 3.1%, respectively. In the case of using $H_2$ as a carrier gas instead of $N_2$, the uniform deposition zone was increased by 20%.