• 한국전기전자재료학회논문지
• /
• 제26권7호
• /
• pp.567-574
• /
• 2013

An optical model is proposed in the white LED using phosphor and LED chip. In this paper a new model that describes the absorption rate and quantum efficiency with increasing the mixing ratio of phosphor in silicone, and the allotment of the phosphor absorption optical power in the several phosphor mixing in the silicone. Single phosphor in silicone from the optical measurement data before and after molding, the solution to get the blue optical power and the phosphor emission optical power is proposed. By these solution the absorption rate and the quantum efficiency was obtained. The model with single phosphor mixing in the silicone the validity was confirmed.

• 한국광학회지
• /
• 제32권4호
• /
• pp.163-171
• /
• 2021

조명에 사용되는 일반적인 백색 발광 다이오드는 청색 발광 다이오드 위에 황색 형광체를 입힌 구조가 보편적이나 발광 스펙트럼상 짙은 적색 성분이 부족해서 조명의 연색성이 떨어지는 문제가 있다. 본 연구에서는 백색 발광 다이오드의 연색 특성을 개선하기 위해 적색 양자점 조명을 백색 조명의 확산판에 적용한 후 광학 시뮬레이션을 이용해 광구조를 최적화하고자 하였다. 양자점의 평균 자유 행정 및 확산판 내 TiO₂ 입자의 농도를 조절해 연색지수, 휘도 등 광특성을 조사했다. 대부분의 조건에서 연색지수는 90을 넘었고 이는 적색 양자점 필름의 적용이 일반적인 백색 발광 다이오드의 연색 특성을 개선하는 데 효과적인 방법임을 보여준다. 색좌표의 각도 의존성은 확산판과 조명 하단의 반사판 사이에 형성되는 광학적 공동 구조를 활용함으로써 제거할 수 있었는데 이는 공동 내 위치한 양자점 필름을 통한 빛의 다중 투과가 시야각에 따른 광경로의 차이를 줄였기 때문으로 해석된다.

• 한국통신학회논문지
• /
• 제39B권11호
• /
• pp.755-762
• /
• 2014

가시광 통신(VLC, Visible Lighting Communication) 시스템은 백색광 LED(Light Emitting Diode)와 스위칭 구동 회로를 이용한 변조 기법을 사용하여 조명 기능과 무선 디지털 통신 기능을 동시에 수행할 수 있는 차세대 통신 기술이다. 본 논문에서는 가시광 통신이 가능한 백색광 LED와 스테레오 이미지 센서를 이용한 실내 측위 알고리즘을 제안한다. 실내의 천장에 있는 백색광 LED는 자신의 위치 정보를 브로드캐스트하고, 이동체는 스테레오 이미지 센서에 맺히는 상과 전달받은 정보를 이용하여 이동체의 3차원 위치정보와 방위각을 구한다. 시뮬레이션을 통해 3차원 위치정보를 기존의 방안들과 비교하였다. 더불어, 제안한 알고리즘의 방위각 오차 특성을 분석하였다.

• 한국생산제조학회지
• /
• 제19권5호
• /
• pp.616-621
• /
• 2010

New type of the base material of the light-emitting diode requires copper wafer in view of heat and electrical conductance. Therefore, polishing process of the substrate level is needed to get a nanometer level of surface roughness as compared with pattern structure of nano-size in the semiconductor industry. In this paper, a series of lapping and polishing technique is shown for the rough and deflected copper substrate of thickness 3mm. Lapping by sand papers tried air cooling method. And two steps of polishing used the diamond abrasives and the $Al_2O_3$ slurry of size 100mm considering the residual scratch. White-light interferometer proved successfully a mirror-like surface roughness of Ra 6nm on the area of $0.56mm{\times}0.42mm$.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.244-246
• /
• 2007

The LCD backlight technique using light-emitting diode(LED) has been studied in the recent backlight market. The white light is need for LCD backlight and it is generally implemented by combining the RGB-LEDs to obtain the high brightness. However, RGB-LEDs have different color characteristics for the current and temperature variations, which results in the color shift problem. The color shift characteristics of RGB-LEDs for the current and temperature variations are investigated in this paper. This result can be used to control the color of backlight system using RGB-LEDs.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.377-378
• /
• 2007

In this paper, we were confirmed the optical characteristics of LED module by changing ambient temperature and driving current. When we supplied same driving current, the brightness quality drops due to an increased ambient temperature. The difference of brightness properties came out more large according to an increased driving current. Moreover, peak wavelength become shifted by long wavelength and declined output power by increasing driving current.

• 한국통신학회논문지
• /
• 제36권9B호
• /
• pp.1117-1125
• /
• 2011

이 논문에서는 LED(Light Emitting Diode) 조명을 이용한 간편한 가시광 통신 시스템을 구현하기 위해, 비 캐리어 NRZ-OOK(non-return to zero on off keying) 변조 방식을 사용하고, 가시광 송신을 위한 발광소자인 $3{\times}3$ 백색 LED 배열과 가시광 수신을 위한 여러 가지 포토다이오드를 사용하여 송수신 소자사이의 거리가 약 2.5m이고, 전체 시스템 속도가 115.2kbps의 전송속도를 가지는 가시광 시스템을 설계하여 구현 한다. 구현된 시스템의 성능분석을 위해 LED 와 포토다이오드 종류, LED 배열 수, 전송속도 따른 최대 송수신 거리를 구하고 여러 가지 구현시스템의 성능을 실험을 통해 분석한다.

• 전기학회논문지
• /
• 제64권2호
• /
• pp.284-288
• /
• 2015

The color temperature flexibility-typed Lighting Emitting Diode(LED) lighting control system proposed in this thesis employs Pulse Width Modulation(PWM) technique to control the brightness of LED lighting. The LED lighting used as a light source has 20W downlight composed of two types of LED chips: one is Warm White and the other is Cool white. One multi-sensor module consisting an infrared sensor, an illumination sensor, and a temperature sensor was made, to which Bluetooth wireless communication technique was applied to enable a smartphone application to control lighting brightness and identify the information collected from the sensor. CS-1000, a spectroradiometer, was used to measure LED dimming control and the changing values of a color temperature in eight steps. According to a test, it was found that it was possible to change a color temperature from 3187K of Warm White LED to 5600K of Cool White LED.

• Fisheries and Aquatic Sciences
• /
• 제17권4호
• /
• pp.479-486
• /
• 2014

To evaluate their potential utility as an ornamental organism, novel transgenic marine medaka Oryzias dancena strains with a highly vivid fluorescent phenotype were established through transgenesis of a cyan fluorescent protein gene (cfp) driven by the endogenous fast skeletal myosin light chain 2 gene (mlc2f) promoter. The transgenic marine medaka strains possessed multiple copies of transgene integrants and passed their fluorescent transgenes successfully to subsequent generations. Transgenic expression in skeletal muscles at both the mRNA and phenotypic levels was, overall, dependent upon transgene copy numbers. In the external phenotype, an authentic fluorescent color was dominant in the skeletal muscles of the transgenic fish and clearly visible to the unaided eye. The phenotypic fluorescent color presented differentially in response to different light-irradiation sources; the transgenics displayed a yellow-green color under normal daylight or white room light conditions, a strong green-glowing fluorescence under ultraviolet light, and a cyan-like fluorescence under blue light from a light-emitting diode.

• 한국수산과학회지
• /
• 제42권6호
• /
• pp.703-710
• /
• 2009

The spectral irradiance and underwater transmission characteristics of a combined high-luminance light-emitting diode (LED) lights have been studied to evaluate suitable light sources for fishing lamps of the next generation. The wavelengths at which the irradiance was maximum were changed from 473, 501, 525, and 465 nm for blue, peacock blue, green, and white LED light to 475, 504 and 528 nm for [$F_{WB}$], [$F_{PB}$] and [$F_{GB}$] combined LED lights, respectively. If the irradiance characteristics at 400-700 nm wavelengths are set as 100%, the irradiance rates at 450-499 nm and 500-549 nm were decreased from 82.4% and 56% for blue, peacock blue LED light to 60.0%, 38.5% for [$F_{WB}$], [$F_{WP}$] combined LED lights. The underwater transmission characteristics of the combined LED lights were superior in the order [$F_{WB}$], [$F_{BP}$], [$F_{GB}$] in optical water type I; [$F_{WB}$], [$F_{PB}$], [$F_{GP}$] in optical water type II-III; and [$F_{GP}$], [$F_{WP}$], [$F_{PB}$] in optical water type 1. Setting the 10m depth underwater transmission characteristics of the combined LED lights in optical water type I at 100%, the transmission of water types II, III and 1 drops to 29.5%, 8.0% and 2.2%. Based on the distribution of spectral irradiance and underwater transmission characteristics calculated in optical water types II-III, where was the jigging ground for fishing lamps, the [$F_{WB}]$ and [$F_{GP}$] combined LED lights can be used as a suitable light sources for fishing lamps of the next generation.