• Korean Journal of Plant Resources
• /
• v.11 no.3
• /
• pp.290-295
• /
• 1998

Presowing treatements to seed are reasonable for elevating the seedling production efficiency. This experiment was carried out to determine the effects of $GA_3$ [0 (water) : 0.01 mM] and light qulaity (red : white) simultaneously treated before sowing on seedling emergence and growth of tobacco (Nicotiana tabacum L.) cv NC 82 and Burley 21. Red or white light was illuminated 12 hours a day while seeds of the cultivars were imbibed with either water or $GA_3$ 0.01 mM for 3 days. Seedling emergence was measured up to 20 days after sowing but morphological characters and dry weights were done 40 days. The seedling emergence rate of cv NC 82 was more affected by light quality and $GA_3$ pretreatments than that of cv Burley 21. Light quality more influenced the rate than $GA_3$ while red light or water imbibition enhanced the rates of the two cultivars compared to the other treatement. Although mean plant height and leaf number per seedling were nearly equal between the treatements, red light declined leaf area per seedling of cv Burley 21 of which seeds were imbibed in water but white light decreased the areas of both cultiars of which seeds were soaked in $GA_3$solution. Shoot dry weight was greater in cv NC 82 but less in cv Burley 21 pretreated with red light, and root dry weight showed the reverse result in white light, meaning that presowing light and $GA_3$ treatments could be changed the seedling development and growth of tobacco.

• Journal of Technologic Dentistry
• /
• v.35 no.1
• /
• pp.37-42
• /
• 2013

Purpose: The purpose of this study was to evaluate the repeatability of dental white light scanner. Methods: The impression(Zerosil, Dreve, Germany) were digitized in white light scanner(Identica, Medit, Korea) to create 3-dimensional surface-models. The distribution of the discrepancies between the number of points in the corresponding CRM models and the point clouds in the others were measured by a matching-software(PowerInspect 2012, Delcam Plc, UK). The discriptive statistics were used for statistical analysis(SPSS 20.0). Results: The measurement of repeatablity showed very good reliability. The mean(SD) discrepancy value on the white light scanner digital models was 8.7(0.67) ${\mu}m$, based on SD and absolute mean values. Conclusion: These in vitro studies showed that repeatability of dental white light scanner is high reliability. These results can be confirmed in further clinical studies.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.45 no.3
• /
• pp.135-143
• /
• 2009

To study the behavioral reaction of common squid Todarodes pacificus, to different colors of LED light, individual distribution in the dark condition without LED light stimuli, individual distribution when four colors of light stimuli were at the sections of end and middle of water tank and the changes of gathering rates as the elapse of illuminating time were examined. When it was dark, the distribution of the fish in each section of the tank was U-shape regardless of the investigating time intervals, which means that Todarodes pacificus gathered at the both ends of the tank. The individual distribution when light stimuli were at the one end of the tank showed the tendency of gathering at the illuminated section and decreasing at the opposite section. There were 448 of them at the end of the tank when the light was blue, 352 when white, 302 when green and 132 when red. Thus the fish liked blue light the most, followed by white light. The variations of gathering rate at the both ends of tank as illuminating time elapsed showed the tendency of increasing at the light section (A section), however, it showed the tendency of decreasing at the darkest section (F section). The individual distribution showed the tendency of letter $\wedge$ of gathering at the center and decreasing at the both ends mostly when the light stimuli were at the middle section of tank. The gathering rates at the lighting section were 80.4% when red, 76.4% when white, 69.6% when green and 56.7% when blue. The fishes showed the affinity for the red light mostly, followed by the white light source. The red light and blue light showed the opposite when the light stimuli were at the one end of water tank. The variations of gathering rates as the elapse of time at the lighted section showed the tendency of gradual increasing in the four light sources. The color of light source showing the highest gathering rate within 25-30 minutes of light stimuli was the white, followed by the red.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1587-1590
• /
• 2006

Through the engineering of recombination region and energy transfer in organic light emitting device, blue and red light emitting device with good color stability has been successfully obtained. A Color control layer (CCL), which emits green light through the energy transfer from the emission layers, has been introduced into the blue and red light emitting device for RGB white OLED. The RGB white OLED showed the current efficiency of 13 cd/A and the CIE coordinates of (0.33, 0.38) at $1000\;cd/m^2$. The device exhibited very stable spectrum with respect to operating current density and the CIE coordinates varied from (0.34, 0.38) to (0.31, 0.37) for $100-22000\;cd/m^2$.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.154-156
• /
• 2006

A few ten mW white LED can substitute for the indicator light source and it is required to study several watt multi-chip semiconductor light sources in order to replace the light sources for general illumination such as incandescent lights and fluorescent lanes. Since the optical technology used for several mW white LED light source uses only 30% to 52% of the light it is required to develop the design technology of optical system and lens to improve the efficiency more than 80% for insuring the high power of white LED. In this paper, we designed and fabricated new structure reflector to increase the efficiency and is easy to make high power multi-chip LED lamp.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.8
• /
• pp.7-17
• /
• 2015

Changes in melatonin concentration levels by differences in CCT of white LED light focused on Spectral Power Distribution (SPD) differences compared to the same CCT of conventional fluorescent light were analyzed. For this, melatonin concentration levels in saliva samples were taken over four different experiments at seven-day intervals. In 71.4% of participants, it was confirmed that melatonin concentration is suppressed by exposure to light, and a slight difference was observed by different CCTs. In addition, Experiment II with a high CCT was relatively high in terms of the melatonin suppression rate compared to Experiment III. A key finding was the possibility that different SPDs under a particular CCT of white LED light compared to the same CCT of conventional fluorescent light could have the same effect on the melatonin suppression.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1566-1567
• /
• 2007

As the brightness of LED is getting higher, the lighting products using LED are actively being developed. On this study, we researched the characteristics and changes caused by the optical arrangement of LED light source, which applies to illumination by using the optical design programme. The changes were estimated by simulating regarding the arrangement of each form and measurement distance. As a result of the experiment. Intensity increased by 1 and Illuminance increased by around 10, as It changed a triangle into a pentagon. To realize white light, RGBG LED formation was the most efficient in case of square arrangement.

• Current Optics and Photonics
• /
• v.3 no.5
• /
• pp.408-414
• /
• 2019

In this paper we propose a method to generate a true color image in scanning white-light interferometry (SWLI). Previously, a true color image was obtained by using a color camera, or an RGB multichannel light source. Here we focused on acquiring a true color image without any hardware changes in basic SWLI, in which a monochrome camera is utilized. A Fourier transform method was used to obtain the spectral intensity distributions of the light reflected from the sample. RGB filtering was applied to the intensity distributions, to determine RGB values from the spectral intensity. Through color corrections, a true color image was generated from the RGB values. The image generated by the proposed method was verified on the basis of the RGB distance and peak signal-to-noise ratio analysis for its effectiveness.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.04a
• /
• pp.66-66
• /
• 2018

Light fermentation has been conducted under different light conditions such as normal dark light, white light, and light emitting diodes (LEDs) various color (blue, green, red, white on blueberry powder with fermenting bacteria Bacillus subtilis (B2). The bacteria B2 was isolated and identified by 16S rRNA sequencing method. RYRP biologically converted to secondary metabolites through light fermentation in the presence of Bacillus subtilis, the bacteria actively involved in bioconversion process. LEDs fermentation to enhance the production of phenolic content while comparing to normal dark and white light. Among the different color LEDs, blue LEDs mediated fermentation showed higher amount of total phenolic and flavonoid content. Then blue LEDs mediated fermented compound were characterized by FTIR and GC-MS, subsequently the compound was analyzed antioxidant activity tests and the antioxidant activity exhibited higher. This is the first study to demonstrate that B. subtilis-LEDs mediated fermentation is useful for facilitating phenolic compound production and enhancing antioxidant activity, which may have greater application fermentation fields.

• Proceedings of the KIEE Conference
• /
• 2008.05a
• /
• pp.167-168
• /
• 2008

Organic light emitting diodes (OLEDs) show a lot of advantages for display purposes. Because OLEDs provide white light emission with a high efficiency and stability, it is desirable to apply OLEDs as an illumination light source and back light in LCD displays. We synthesized new emissive materials, namely $Zn(HPB)_2$ and Zn(HPB)q, which have a low molecular compound and thermal stability. We studied white OLEDs using $Zn(HPB)_2$ and $Zn(PQ)_2$. The fundamental structures of the white OLEDs were ITO / NPB (40 nm) / $Zn(HPB)_2$ (40 nm) / $Zn(PQ)_2$ (20 nm) / LiAl (120 nm). As a result, we obtained a maximum luminance of $4200cd/m^2$ at a current density of $440mA/cm^2$. The CIE (Commission International de l'Eclairage) coordinates are (0.319, 0.338) at an applied voltage of 10 V.