• 한국세라믹학회지
• /
• 제51권6호
• /
• pp.533-538
• /
• 2014

Today, silicon and epoxy resin are used as materials of conversion lenses for white LEDs on the basis of their good bonding and transparency in LED packages. But these materials give rise to long-term performance problems such as reaction with water, yellowing transition, and shrinkage by heat. These problems are major factors underlying performance deterioration of LEDs. In this study, in order to address these problems, we fabricated a conversion lenses using glass, which has good chemical durability and is stable to heat. The fabricated conversion lenses were applied to a remote phosphor type. In this experiment, the conversion lens for white LED was coated on a glass substrate by a screen printing method using paste. The thickness of the coated conversion lens was controlled during 2 or 3 iterations of coating. The conversion lens fabricated under high heat treatment temperature and with a thin coating showed higher luminance efficiency and CCT closer to white light than fabricated lenses under low heat treatment temperature or a thick coating. The conversion lens with $32{\mu}m$ coating thickness showed the best optical properties: the measured values of the CCT, CRI, and luminance efficiency were 4468 K, 68, and 142.22 lm/w in 20 wt% glass frit, 80 wt% phosphor with sintering at $800^{\circ}C$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.125-126
• /
• 2009

In this study, we report the room temperature synthesis and luminescence properties of white-light-emitting Rb(V,P)$O_3$. The vanadate phosphor, RbV$O_3$, was synthesized by simple mixing of $RbCO_3$ and $V_2O_5$ at room temperature in air. New direct room temperature solidstate reaction is a cost-effective method to synthesize the above luminescent materials.

• 생태와환경
• /
• 제47권1호
• /
• pp.32-40
• /
• 2014

식물공장은 외부 환경요인에 관계없이 효율적인 공간활용을 통해 작물의 생산성 및 경제성을 극대화시켜 생산할 수 있는 획기적인 기술이다. 본 연구은 엽채류 중만추대 열풍적치마상추, 만추대 청치마상추, 그린 로메인상추, 그린골 양상추, 개량사또 쑥갓과 영진 청경채를 대상으로 식물공장에서 실험하였다. LED 시스템을 이용하여 광원의 종류를 적색, 청색, 적색+청색, 적색+청색+백색, 적색+적외선 혼합광으로 구성하였다. 적색+청색 혼합광에서 적색과 청색의 조사기간 비율은 1 : 1, 2 : 1, 5 : 1, 10 : 1로 구성하였고, duty 비는 100%, 99%, 97%로 구성하였다. 광원의 종류에 따른 결과 로메인상추에서 지상부 건중량과 S/R 비는 R+B 혼합광에서 가장 높았고, 양상추의 지하부 건중량과 쑥갓의 S/R 비는 R+B+W 혼합광에서 높았지만, 나머지 종에서는 차이가 없었다. 적색과 청색의 조사기간 비율에 따른 결과 청치마상추, 양상추와 청경체는 지상부 건중량, 총 건중량, S/R비가 비교적 적색의 비율이 높은 조건 (5 : 1)에서 가장 높았다. duty 비에 따른 결과 R+B 혼합광에서 쑥갓은 100%와 99%, 로메인은 100%와 97%일 때 지상부와 지하부, 총 건중량이 높았다. S/R 비는 엽채류 6종 모두 duty 비가 낮은 97%에서 높게 나와 낮은 duty 비에서도 양호한 생육을 보였다. R+B+W 혼합광에서 청치마상추와 로메인상추 그리고 청경채는 duty 비는 낮은 97%에서도 비교적 높은 지상부 건중량 및 총 건중량을 보였다. 또한, 로메인 상추와 양상추의 S/R 비는 duty 비가 97%인 조건에서 가장 높았다. 따라서 LED 시스템을 이용한 식물공장에서 각 엽채류 별로 적절한 광원과 광질을 이용하면 외부 환경요인에 관계없이 안정적인 재배를 할 수 있을 것이다.

• Journal of the Optical Society of Korea
• /
• 제19권3호
• /
• pp.311-316
• /
• 2015

We investigate the temperature dependence of the phosphor conversion efficiency (PCE) of the phosphor material used in a white light-emitting diode (LED) consisting of a blue LED chip and yellow phosphor. The temperature dependence of the wall-plug efficiency (WPE) of the blue LED chip and the PCE of phosphor are separately determined by analyzing the measured spectrum of the white LED sample. As the ambient temperature increases from 20 to $80^{\circ}C$, WPE and PCE decrease by about 4.5% and 6%, respectively, which means that the contribution of the phosphor to the thermal characteristics of white LEDs can be more important than that of the blue LED chip. When PCE is decomposed into the Stokes-shift efficiency and the phosphor quantum efficiency (QE), it is found that the Stokes-shift efficiency is only weakly dependent on temperature, while the QE decreases rapidly with temperature. From 20 to $80^{\circ}C$ the phosphor QE decreases by about 7% while the Stokes-shift efficiency changes by less than 1%.

• 한국ITS학회 논문지
• /
• 제8권2호
• /
• pp.83-90
• /
• 2009

백색 LED(Light Emitting Diode:발광다이오드)는 고휘도, 향상된 안정성, 낮은 전력 소비, 그리고 긴 수명 등 유리한 특성을 제공한다. LED는 전기 신호를 광신호로 변환시킴으로써 광통신 실내 무선 광 조명실뿐만 아니라, 무선 광 통신 시스템에도 사용되는 전자 소자이다. 현재 이러한 백색 LED에 대해서 다양한 연구가 진행 중이며, 본 논문에서는 이러한 백색 LED를 이용한 VLC(Visible Light Communication:가시광통신)의 다중 접속 방식을 논의한다. 제안된 시스템에서는 현 VLC 시스템의 간섭을 줄이고, 수용량을 늘리기 위해 CDMA(Code Division Multiple Access:코드 분할 다중 접속)를 VLC시스템에 적용한다. 또한 AWGN(Additive White Gaussian Noise) 채널과 Diffuse 채널에서의 OOK(On-off keying) 변조와 BPSK 변조를 사용한 VLC-CDMA통신 시스템을 비교해봄으로써 OOK 변조의 우수성을 결과의 분석을 통하여 나타내었다. 그리고 다중경로환경에서와 AWGN환경에서의 BER을 비교함으로써 다중경로에 의한 간섭의 해결의 중요성을 검토한다. 다중 접속 방식으로 인한 ISI(Inter Symbol Interference)를 제거하여 시스템의 효율을 높이기 위해 Directed LOS(Line Of Sight)와 Diffuse Link를 가정하여 광 확산 코드인 OOC(Optical Orthogonal Code: 광 직교 코드)를 적용한 VLC-CDMA를 제안하고, 성능 분석을 제시한다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2005년도 하계학술발표회
• /
• pp.66-67
• /
• 2005

• 한국세라믹학회지
• /
• 제44권3호
• /
• pp.147-151
• /
• 2007

An improvement for the efficiency of the $Sr_{2}SiO_{4}:Eu$ yellow phosphor under the $450{\sim}470\;nm$ excitation range have been achieved by adding the co-doping element ($Mg^{2+}\;and\;Ba^{2+}$) in the host. White LEDs were fabricated through an integration of an blue (InGaN) chip (${\lambda}_{cm}=450\;nm$) and a blend of two phosphors ($Mg^{2+},\;Ba^{2+}\;co-doped\;Sr_{2}SiO_{4}:Eu$ yellow phosphor+CaS:Eu red phosphor) in a single package. The InGaN-based two phosphor blends ($Mg^{2+},\;Ba^{2+}\;co-doped\;Sr_{2}SiO_{4}:Eu$ yellow phosphor+CaS:Eu red phosphor) LEDs showed three bands at 450 nm, 550 nm and 640 nm, respectively. The 450 nm emission band was due to a radiative recombination from an InGaN active layer. This 450 nm emission was used as an optical transition of the $Mg^{2+},\;Ba^{2+}\;co-doped\;Sr_{2}SiO_{4}:Eu$ yellow phosphor+CaS:Eu red phosphor. As a consequence of a preparation of white LEDs using the $Mg^{2+},\;Ba^{2+}\;co-doped\;Sr_{2}SiO_{4}:Eu$ yellow phosphor+CaS:Eu red phosphor yellow phosphor and CaS:Eu red phosphor, the highest luminescence efficiency was obtained at the 0.03 mol $Ba^{2+}$ concentration. At this time, the white LEDs showed the CCT (5300 K), CRI (89.9) and luminous efficacy (17.34 lm/W).

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.454-459
• /
• 2013

Recently, remote phosphors have been reported for application to white LEDs to provide enhanced phosphor efficiency compared with conventional phosphor-based white LEDs. In this study, a remote phosphor was produced by coating via screen printing on a glass substrate with different numbers of phosphor coating. The paste consists of phosphor, lowest softening glass frits, and organic binders. The remote phosphor could be well controlled by varying the phosphor content rated paste. After mounting the remote phosphor on top of a blue LED chip, CCT, CRI, and luminance efficiency were measured and values of 5300 K, 62, and 117 lm/W were respectively obtained in the 80 wt% phosphor with 3 coating layers sintered at $800^{\circ}C$.

• 산업경영시스템학회지
• /
• 제46권3호
• /
• pp.59-68
• /
• 2023

Currently, yellow phosphor of Y3Al5O12:Ce3+ (YAG:Ce) fluorescent material is applied to a 450~480nm blue LED light source to implement a white LED device and it has a simple structure, can obtain sufficient luminance, and is economical. However, in this method, in terms of spectrum analysis, it is difficult to mass-produce white LEDs having the same color coordinates due to color separation cause by the wide wavelength gap between blue and yellow band. There is a disadvantage that it is difficult to control optical properties such as color stability and color rendering. In addition, this method does not emit purple light in the range of 380 to 420nm, so it is white without purple color that can not implement the spectrum of the entire visible light spectrum as like sunlight. Because of this, it is difficult to implement a color rendering index(CRI) of 90 or higher, and natural light characteristics such as sunlight can not be expected. For this, need for a method of implementing sunlight with one LED by using a method of combining phosphors with one light source, rather than a method of combining red, blue, and yellow LEDs. Using this method, the characteristics of an artificial sunlight LED device with a spectrum similar to that of sunlight were demonstrated by implementing LED devices of various color temperatures with high color rendering by injecting phosphors into a 405nm deep blue LED light source. In order to find the spectrum closest to sunlight, different combinations of phosphors were repeatedly fabricated and tested. In addition, reliability and mass productivity were verified through temperature and humidity tests and ink penetration tests.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.7-11
• /
• 2008

Future electric lights will be composed of white LEDs (Light Emitting Diodes). Indoor wireless optical communication systems utilizing white LED lights have been studying about it. Generally, plural lights are installed in room. Therefore, their optical path difference must be considered. In this paper, the influence of an optical path difference has been investigated and two approaches against this problem are introduced. One uses OOK-RZ (On-Off Keying, Return-to-Zero) coding and the other uses optical OFDM (Orthogonal Frequency Division Multiplexing). From the results of computer simulations, we have found that these approaches are feasible for the wireless optical communication systems utilizing white LED lights.