• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.4
• /
• pp.287-294
• /
• 2008

This paper describes an implementation of a wide-range dimming controller of a LED backlight for Avionics applications such as a control display unit(CDU) and multi-function display(MFD). The digital dimming controller employing a current controlled buck converter and light sensor feedback is proposed. The proposed system provides a wide dimming control range of from 150fL to 0.05fL(3000:1) required for avionic displays. The experimental results are provided to show the control performance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.55-56
• /
• 2008

The photo leakage currents of a conventional hydrogenated amorphous silicon(a-Si:H) thin film transistor(TFT) were investigated and analyzed in the case of illumination from various lightsources such as halogen lamp, cold cathode fluorescent lamp(CCFL) backlight, and white light emitting diode(LED) backlight The photo leakage characteristics showed the apparent differences in the leakage level and in the $I_{on}/I_{off}$ ratio in spite of the similar luminances of light sources. This leakage level is expected to be related to the wavelength of the lowest intensity peak from spectral analysis of light sources.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.403-406
• /
• 1998

Electroluminescence(EL) come from the light emission obtained by electrical excitation energy passing through a phosphor layer under applied high electrical field. The preparation and characterizations of light emitting ACPEL(alternating-current powder electroluminescent) cell based on two kinds of phosphor mixed ZnS:Mn, Cu and ZnS:Cu phosphor. Basic structure is ITO/Mixed Phosphor/insulator/Al sheet, each layer was mixed by binder, which concentration 11p for phosphor, 8p for insulator. Dielectric properties was investigated first and emission properties of P-LED based on ZnS:Mn,Cu/ZnS:Cu,Br mixture. Emission spectra exhibits two kinds of main peaks at 100V, 1kHz sinusoidal excitation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.9
• /
• pp.1290-1296
• /
• 2013

The light intensity which represents the relative amount of brightness and darkness is very important feature to discern the color hue and its relevant information. With this aim, we devise a new optical system and method to analyze the light intensity. Our suggested system including a phototransistor and white-high-brightness chip light-emitting diode intend estimate the contrast value utilizing Image Research Institute(I.R.I.) Hue & Tone samples which includes 120 color sheets arranged by the color hue and tone. As a result, we confirmed that the brightness of the color checker can be accurately estimated by a high-brightness light-emitting-diode optical system.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.4
• /
• pp.447-454
• /
• 2014

The marine microalgae Chaetoceros calcitrans was cultured under a fluorescent lamp (CON) and light-emitting diodes (LEDs) of various wavelengths (blue, LB; red, LR; green, LG; white, LW); changes in growth, fucoxanthin, chlorophyll-a, amino acid and fatty acid profiles were investigated. LR-exposed cultures exhibited the highest specific growth rate (SGR) (0.34), whereas LG-exposed cultures showed the lowest SGR (0.26). After cultivation for 10 days, the maximum dry cell weight (g/L) of LR-exposed cultures was significantly higher than that of those exposed to other light conditions (LR${\geq_-}$CON>LB${\geq_-}$LW${\geq_-}$LG). Eicosapentaenoic acid (EPA) levels were significantly higher in CON-exposed cultures compared to those exposed to LW (P<0.05), with no marked difference compared to those exposed to LB, LR and LG (P>0.05). The fucoxanthin content was highest in LB-exposed cultures ($6.3{\mu}g/mL$), whereas LW showed the lowest ($3.6{\mu}g/mL$; P<0.05). Chlorophyll-a content was highest in cultures exposed to LB compared to other light sources. These results suggest consistent differences in growth and biochemical composition after exposure to light of different wavelengths.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.3
• /
• pp.259-265
• /
• 2013

The marine microalgae Nannochloropsis sp. was cultured under a metal halide lamp (MH) or light-emitting diodes (LEDs) of various wavelengths (blue, LB; red, LR; yellow, LY; green, LG; white, LW); changes in growth, total carotenoid, chlorophyll a, amino acid and fatty acid profiles were investigated. LB-exposed cultures exhibited the highest specific growth rate (SGR) (0.32), whereas LY-exposed cultures showed the lowest SGR (0.18). After cultivation for 9 days, the maximum dry cell weight (g/L) of LB-exposed cultures was significantly higher than that of those exposed to other light conditions (LB>MH>LW$${\geq_-}LG{\geq_-}$$LR>LY). The essential amino acid (EAA, %) contents of cultures exposed to LG, LB, LR and MH were higher than those exposed to LY and LW (P<0.05). Eicosapentaenoic acid and n-3 highly unsaturated fatty acid levels were significantly higher in MH-exposed cultures compared to those exposed to LY (P<0.05), with no marked difference compared to those exposed to LB, LG, LR and LW (P>0.05). The total carotenoid content was highest in LR-exposed cultures (18.0 mg/L), whereas MH showed the lowest (11.8 mg/L; P<0.05). Chlorophyll a content was highest in cultures exposed to LR compared to other light sources. These results suggest consistent differences in growth and biochemical composition after exposure to light of different wavelengths.

• Journal of the Korean Ceramic Society
• /
• v.40 no.12
• /
• pp.1170-1176
• /
• 2003

We developed an evolutionary optimization process involving a genetic algorithm and combinatorial chemistry (combi-chem), which was tailored exclusively for tile development of LED phosphors with a high luminescent efficiency, when excited by soft ultra violet irradiation. The ultimate goal of our study was to develop oxide red phosphors, which are suitable for three-band white Light Emitting Diodes (LED). To accomplish this, a computational evolutionary optimization process was adopted to screen a Eu$^{3+}$-doped alkali earth borosilicate system. The genetic algorithm is a well-known, very efficient heuristic optimization method and combi-chem is also a powerful tool for use in an actual experimental optimization process. Therefore the combination of a genetic algorithm and combi-chem would enhance the searching efficiency when applied to phosphor screening. Vertical simulations and an actual synthesis were carried out and promising red phosphors for three-band white LED applications, such as Eu$_{0.14}$Mg$_{0.18}$Ca$_{0.07}$Ba$_{0.12}$B$_{0.17}$Si$_{0.32}$O$_{\delta}$, were obtained.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.4
• /
• pp.19-26
• /
• 2010

We found that saturated water vapor pressure is the most dominant stress factor for the degradation phenomenon in the package for high-power phosphor-converted white light emitting diode (high power LED). Also, we proved that saturated water vapor pressure is effective acceleration stress of LED package degradation from an acceleration life test. Test conditions were $121^{\circ}C$, 100% R.H., and max. 168 h storage with and without 350 mA. The accelerating tests in both conditions cause optical power loss, reduction of spectrum intensity, device leakage current, and thermal resistance in the package. Also, dark brown color and pore induced by hygro-mechanical stress partially contribute to the degradation of LED package. From these results, we have known that the saturated water vapor pressure stress is adequate as the acceleration stress for shortening life test time of LED packages.

• Journal of Satellite, Information and Communications
• /
• v.6 no.1
• /
• pp.57-62
• /
• 2011

The VLC (visible light communication) system is communication technology using visible rays (RGB) that come out in LED device. It is energy curtailment effect and possible in ubiquitous network service applications. Also, VLC system has the above advantage about that the communication throughout the whole room is enabled by high power lighting and lighting equipment with white colored LED which are easy to install and have good outward appearance. However, the signal detection performance for the receiver near the network of transmitter boundary is severely degraded and the transmission efficiency decreased due to the influence of the interference signal from the adjacent networks. In this paper, we propose an interference mitigation method with optical beamforming in VLC systems, and evaluate the reception performance. For the system BER, the proposed optical beamforming transmission demonstrates the performance enhancement compared to the not using the optical beamforming scheme, and up to about 5~6dB SNR performance gain is achieved.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.627-627
• /
• 2013

Recently, most studies concerning inorganic CdSe/ZnS quantum dot (QD)-polymer hybrid LEDs have been concentrated on the structure with multiple layers [1,2]. The QD LEDs used almost CdSe materials for color reproduction such as blue, green and red from the light source until current. However, since Cd is one of six substances banned by the Restriction on Hazardous Substances (RoHS) directive and classified into a hazardous substance for utilization and commercialization as well as for use in life, it was reported that the use of CdSe is not suitable to fabricate a photoelectronic device. In this work, we demonstrate a novel, simple and facile technique for the synthesis of ZnO-graphene quasi-core.shell quantum dots utilizing graphene nanodot in order to overcome Cd material including RoHS materials. Also, We investigate the optical and structural properties of the quantum dots using a number of techniques. In result, At the applied bias 10 V, the device produced bluish-white color of the maximum brightness 1118 cd/$m^2$ with CIE coordinates (0.31, 0.26) at the bias 10 V.