• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.2
• /
• pp.284-288
• /
• 2015

The color temperature flexibility-typed Lighting Emitting Diode(LED) lighting control system proposed in this thesis employs Pulse Width Modulation(PWM) technique to control the brightness of LED lighting. The LED lighting used as a light source has 20W downlight composed of two types of LED chips: one is Warm White and the other is Cool white. One multi-sensor module consisting an infrared sensor, an illumination sensor, and a temperature sensor was made, to which Bluetooth wireless communication technique was applied to enable a smartphone application to control lighting brightness and identify the information collected from the sensor. CS-1000, a spectroradiometer, was used to measure LED dimming control and the changing values of a color temperature in eight steps. According to a test, it was found that it was possible to change a color temperature from 3187K of Warm White LED to 5600K of Cool White LED.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.1
• /
• pp.1-9
• /
• 2013

The experimental study of the white LED lighting focused on the readability in interior space according to age group is conducted realizing importance of the lighting environment and necessity of lighting study depending on the user situation. The results of study represent that a teenager does not show sensitive reaction to change of the color temperature and illuminance. The people in 20s and 30s prefer neutral white LED lighting and are very sensitive to change of the light environment. The people in 50s and 60s prefer high illumination and cool white LED lighting series. People of all ages highly appraise 6000K of 700 lux and 4000K in the illuminance range of 700 lux to 1000 lux for readability. The white LED lighting of color temperature 4000K is estimated as a suitable environment for readability in a wide range of illumination.

• Journal of the Korean Vacuum Society
• /
• v.12 no.4
• /
• pp.235-238
• /
• 2003

Conventional LED displays use pixels which consist of red, green and blue LEDs of different operation voltages and degradation characteristics. Thus, the circuits are complicated and the display of each color changes independently with the operated time. In order to solve these drawbacks, an LED chip of a short wavelength and an LED lamp with the mixture of red, green, blue fluorescencers and epoxy on the LED chip were studied. The fluorescencers are excited by the light of the LED chip. The LED chip has an active layer of InGaN, a peak wavelength of 408 nm, a FWHM of 13 nm and the CIE index of (0.198, 0.087). White LED lamps were obtained and the CIE index change was observed with the change of the epoxy amount added to the fluorescencers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.274-277
• /
• 1996

This paper describes the realization of the full-color to the degree of nearest white light by compounding high brightness Red, Green and Blue LEDs with appropriate proportional index. Once these three colors; red, green and blue are mixed, they are genearlly additive mixing and produce white light color contrasted to negative mixing. The luminous efficiency is defined as the product of the efficiency(lm/w), which indicates the degree of perceptual response by the human eye to unit energy(W) of light emitted by an active display devises and as the conversion efficiency of the device from electric power consumed to optical energy produced. We will deduce the each number of LEDs theoretically and design several shapes of LED displays for the full-color. Finally theoretical predictions will be compared with the measured data with different type of display designs.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2585-2587
• /
• 2001

This paper suggests a method of color variation technique to generate stable white light. The light from high brightness RGB LED was mixed according to the RGB LED luminance ratio. A microcontroller-based PWM control circuit and switching circuit is used to achieve full color variation. It is confirmed that the stable white light and full color variation is possible.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.1
• /
• pp.25-30
• /
• 2008

In this study, the Fourier-Domain optical measurement system, which use a commercial high power white LED as a light source and a CCD linear-array as a detector is realized. The proposed system shows the axial measurement range over $125{\mu}m$ and the axial resolution below $1.24{\mu}m$. This system has the advantage of the cost effective and compact structure and also the better resolution than the existing technologies, which have a resolution above a few of ${\mu}m$ and use bulky and/or expensive broadband light sources.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.9
• /
• pp.630-636
• /
• 2012

The purpose of this study was to determine optimum wavelength, light intensity, aeration rate, and temperature for the cultivation of Dunaliella salina illuminated by various types of light emitting diode. Growth rates of Dunaliella salina were faster at higher temperature than the growth rate at lower temperature. Among the culturing temperatures, $22^{\circ}C$ was the optimum temperature for the growth of Dunaliella salina. White LED was the most efficient light source and lower light intensity (3,000 Lux) resulted in better biomass production (1.30 g/L). The value of aeration varied between 0 and 2.4 vvm at the illumination of 3,000 Lux of white light emitting diode. Highest specific growth rate of $1.12day^{-1}$ was obtained at no-aeration and lower specific growth rates were obtained for other aeration tests, which indicated that aeration could be harmful for the cultivation of Dunaliella salina.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.3
• /
• pp.183-193
• /
• 2011

This study made a comparative analysis of behavioral reaction of squid to red (624nm), green (524nm), blue (460nm) & white LED light, its arrival time for the shadow section by making the shadow section in the central section of a water tank just like the bottom part of a squid jigging vessel, and on-site catching efficiency of LED fishing lamp with control fishing vessel. The color LED light showing the highest squidgathering rate as against the shadow section was found to be blue LED light with 39.3% rate under the dark (0.05lx) condition. Under the brighter condition than 0.05lx, white LED light was found to have the highest gathering rate of 41.5%. In addition, it was found that squid gathering rate was high at the shadow section which showed 6.3-fold brightness difference between the shadow section and bright section. As for the arrival time for the shadow section, blue LED light was found to be the fastest in attracting squids in 192.7 seconds under the dark condition while the red LED light was the fastest in luring squids in 164.6 seconds under the bright condition. The ratio of the squid-jigging operation and sailing in fuel consumption of the fishing vessel loaded with LED fishing lamp is about 7 to 1, showing most of the fuel is consumed more in sailing than in squid-jigging operation. As for a catch of squid, the control vessel loaded with MH (Metal Halide) fishing lamp had more catch of 600-7,080 squids than the vessel loaded with LED fishing lamp having a catch of 260-1,700 squids. In addition, even in the comparison of a catch per automatic jigging machine, the catch of the vessel loaded with MH fishing lamp excelled that of the vessel loaded with LED fishing lamp in 6 operations of squid jigging out of 9 operations. The ratio of hand-jigging and automatic jigging machine (one line) in the LED fishing lamp vessel was 1:1.1 excepting the case of having a catch only using an automatic jigging machine, showing almost the same with each other in catches, while in case of a MH fishing lamp vessel, its ratio against hand-jigging was 1 to 5.8, showing hand-jigging excelled in catches.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.3
• /
• pp.183-190
• /
• 2016

This study carried out an experiment to find out the reaction of hairtail, Trichinus lepturus to the colors of LED light as a basic study on the development of the trolling gear and a method to enable the day-night operation. We used hairtails caught around Seongsan-po, Jeju Island by set nets and hairtail angling. The seven hairtails of the average length 68.9 cm (SD 9.2 cm) and the average weight 135.9 g (SD 47.9 g) were adapted themselves in the experimental water tank, 15 m Self-Governing 1.7 m in height and 1.5 m in depth, and then they were studied. We conducted experiment at the Ocean and Fisheries Research Institute in Jeju Special Self-Governing Province, from November to December 2015, and the sea surface temperature was between 16.5 and $19.5^{\circ}C$. The four colors of LED light, blue, white, green and red, were set up to transmit downward from the marginal area of tank. The 1 meter depth light intensity of LED colors is as follows: $0.09w/m^2/s$ (blue), $0.18w/m^2/s$ (white), $0.04w/m^2/s$ (green) and $0.007w/m^2/s$(red) To know the optimum LED color light, we selected one with better reaction rate after comparison of two colors simultaneously and the selected color was again compared to the other color in a tournament style two times a day (day and night) and ten times totally. The reaction rates were shown as the frequencies of hairtail appearance for 5 minutes in the lighting zone after turning on the LED lights. The reaction rate of the blue was at 97% unlike the red 3% (p < 0.001). The blue was at 75% unlike the green at 25% (p < 0.001). The blue was at 67% unlike the white at 33% (p < 0.001). Therefore, the color of light source showing the highest reaction rate was the blue.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.10
• /
• pp.1327-1332
• /
• 2014

This paper presents information about the examples of the design on Illumination of Structures(LED Light Pipe for lighthouse) in Korea. We have applied illumination by flood-lighting or facade-lighting in place of the 57 lighthouses (offshore structures) and 4 beacons. The ways of illumination of structures are using direct illumination with LED, halogen lamps and metal halide lamps, and indirect illumination with LED non-neon lamps. The illumination of structures helps a observer to identify the Aids to Navigation and w aterway. The fabricated LED Light Pipe is a transparent acrylic round bar and easy to install. The Light Pipe is arranged in two rows of L ED (78ea). It can be connected in series. It has 4 colours(Red, Green, Yellow, White). We analyzed and the horizontal divergence angle of the LED light pipe is defined as the range with 50% of maximum luminous intensity. Also, we evaluated the conspicuity on the origin al lantern and LED Light pipe for lighthouse. The field experiment was conducted in 'Yeosuguhang lighthouse' in Yeosu-city (Korea). F rom the experimental results, it was confirmed that the fabricated LED Light Pipe is clearly distinguished.