• 대한기계학회논문집A
• /
• 제37권2호
• /
• pp.177-185
• /
• 2013

본 논문에서는 윤중감소를 고려한 이론적 새로운 탈선계수 모델을 제시한다. 본 탈선계수 모델은 열차 충돌 원인 탈선현상을 예측할 수 있는 단일 윤축의 이론적 탈선모델을 바탕으로 도출한다. 현재 국내 탈선규정에서는 플랜지 각이 $60^{\circ}$ 이고 마찰계수가 0.3인 조건을 나달식에 적용하여 탈선계수를 구한 후 안전율을 적용하여 0.8을 규정하고 있으나, 플랜지 각이 변경되면 이론적 설명이 부족하게 된다. 따라서 제시한 탈선계수 이론모델을 이용하여 탈선계수 규정 값 0.8을 이론적으로 접근해본다. 또한 국내탈선규정에서 윤중 감소율을 50%까지 허용하고 있으나 명확한 규정근거를 제시하고 있지 않다. 따라서 윤중 규정 50%감소와 탈선계수 규정 값 0.8과의 상관 관계를 앞서 제시한 탈선계수 이론모델을 이용하여 이론적으로 규명한다. 마지막으로 동역학 시뮬레이션을 이용하여 탈선계수 이론모델의 타당성을 입증한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.299-307
• /
• 2005

The 180 km/h Korean Tilting Train(TTX) which is now developing as a part of the Korean National R&D project, was elaborately designed. As the tilting trains run curve track with the $30\%$ higher speed than normal trains, the higher centrifugal and dynamic force are expected. Furthermore the complex tilting system increase the probability of failure. Therefore it is very important for tilting train to ensure safety against derailment under the various kind of failed condition in the middle of running as well as normal operating condition. The TTX train have the relatively high roll stiffness to improve the lateral ride comfort and to limit the roll displacement on the curve. But the higher roll stiffness increase the risk of derailment on the twisted track. This paper describes the study to review the safety against derailment caused by the wheel unloading on the severely twisted track. The worst combination of maximum cant change with maximum twist defect was established by numerical simulation. And also it was assumed that the air bag deflated and still the train run its speed limit. Those kind of assumption might be the worst case from the view point of wheel unloading derailment on the twisted track. The dynamic simulation was done by means of VAMPIRE S/W and non-linear transient analysis. We found that derailment quotients Q/P was only slightly influenced by track twist but the wheel unloading was greatly influenced. And we ascertained that the higher roll stiffness the higher wheel unloading. In case of air bag deflated situation, the wheel unloading reached up to $100\%$ which means the wheel lift or jumped. Therefore it was concluded that the design need to be improved to ensure the safety against derailment on the maximum twisted track in case of air bag deflated and tilting train's speed limit.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.435-442
• /
• 2004

Tilting train allow the train to pass curve at higher speed without affecting passenger comfort. As the tilting trains run curve track about 30$\%$ higher than non-tilting trains, the centrifugal force and dynamic force will be higher. Therefore it is very important for tilting train to ensure safety against derailment, and to reduce the lateral track forces by applying light-weight design, optimized suspension design and steering mechanism. The 180 km/h Korean Tilting Train(TTX) which is now developing as a part of the Korean National R & D project, was designed and analytically verified to meet these special requirements. This paper describes the analytic study to verify the safety against derailment, especially on the wheel unloading in case of tilting actuation. The severest curve geometry and curving speed was assumed, the tilting control pattern was also assumed as trapezoidal force function applied to tilting bolster and bogie frame. For the comparison, the operation with the speed of tilting train without tilting actuation was numerically simulated and the operation with the balanced speed without tilting actuation was also numerically simulated. Through the numerical simulation of various operating case, we found that derailment quotients, wheel unloading and Q/P was not affected by tilting actuation and that the bogie of TTX was nicely designed to satisfy the safety against the derailment.

• 대한기계학회논문집A
• /
• 제37권6호
• /
• pp.827-832
• /
• 2013

본 논문에서는 횡압으로 곡선추종성을 판단하였고, 주행안전성은 윤중감소율 및 윤중과 횡압의 비율인 탈선계수로 평가하였다. 고출력 신형 전기기관차의 곡선추종성 및 주행안전성 평가한 결과, 탈선계수는 시험축이 열차의 앞쪽에 위치할 때가 뒤쪽에 위치할 때보다 크게 나타났으며, 탈선계수의 최대값은 경부선 상행선에서 0.572로 나타났다. 횡압은 곡선 선로가 많은 구간에서 크게 발생하여 주행속도보다는 곡선반경에 비례하는 것으로 나타났으며, 최대 축당 횡압은 태백선에서 77.6 kN 까지 발생하였다. 윤중감소율은 영동선에서 47.6 %까지 발생하였다. 최고속도에서의 주행안전성과 최소곡선반경에서의 곡선통과성능이 요구하는 기준을 만족하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.745-750
• /
• 2004

For the safety of railway, it should be evaluated for the running safety by measuring the derailment coefficient. Although railway has run the fixed and maintained rail, some of railway is derailed. This report shows the results that performed the static load test, wheelset manufacturing for test, main line running test on the basis of the derailment theory and experience. It is executed main line test into more than 80km/h for estimating the curving performance and running safety of Gwangju EMU. As the test results, could confirm the curving performance and running safety of Gwangju EMU from the results of the wheel unloading, lateral force, derailment coefficient etc. Derailment coefficient was less than 0.8, and lateral force allowance limit and wheel load reduction ratio were enough safe.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.573-574
• /
• 2006

• 한국정밀공학회지
• /
• 제28권5호
• /
• pp.559-564
• /
• 2011

For the safety of railway, it should be evaluated for the running safety by measuring the derailment coefficient. Although railway has run the fixed and maintained rail, some of railway is derailed. This report shows the results that performed the static load test, main line running test on the basis of the derailment theory and experience. It is executed main line test into more than 90km/h for estimating the curving performance and running safety of depressed center flat car of 3-axle bogie. As the test results, could confirm the curving performance and running safety of depressed center fiat car of 3-axle bogie from the results of the wheel unloading, lateral force, derailment coefficient etc. Derailment coefficient was less than 0.6, and lateral force allowance limit and wheel load reduction ratio were enough safe.

• 한국소음진동공학회논문집
• /
• 제22권3호
• /
• pp.244-252
• /
• 2012

Recently, the speed of a train has been increased. So the trains are being exposed to wind more severely than before. Because of the operation of high speed trains and lightweight of the train, risks of train derailment have being increased. In this study, aerodynamic effects of a newly designed high speed train, HEMU-400x, are evaluated. For aerodynamic effect evaluation, analysis method is selected by examining the safety standards for high speed train. The condition of aerodynamic effects is selected by adverse effect conditions. In order to calculate $C_s$ coefficients, numerical analysis is conducted. Using $C_s$ coefficients, the side force is calculated. Through dynamics analysis, derailment and wheel unloading are obtained. Using these results, derailment evaluation is performed.

• Journal of Mechanical Science and Technology
• /
• 제18권2호
• /
• pp.262-271
• /
• 2004

Hydropneumatic suspension unit is an important part of tracked vehicles to absorb external impact load exerted from the non-paved road and the cannon discharge. Its absorption performance is strongly influenced by both damping and spring forces of the unit. In this paper, we numerically analyze the damping characteristics of the in-arm-type hydropneumatic suspension unit (ISU) by considering four distinct dynamic modes of the ISU damper: jounce-loading, jounce-unloading, rebound-loading and rebound-unloading. The flow rate coefficients determining the oil flow rate through the damper orifice are decided with the help of independent experiments. The wheel reaction force, the flow rate at cracking and the damping energy are parametrically investigated with respect to the orifice diameter and the wheel motion frequency.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.171.2-171
• /
• 2001

This paper presents a force control of a arm of walking training robot. The current gait training apparatus in hospital are ineffective for the difficulty in keeping constant unloading level and constraining patients to walk freely. The proposed walking training robot is designed to unload body weight effectively during walking. The walking training robot consists of unloading manipulator and mobile platform. The manipulator driven with a electro-mechanical linear mechanism unloads body weight in various level. The mobile platform is wheel type, which allows to patients unconstrained walking. Unloading system with electro-mechanical linear mechanism has been developed, which has advantages such as low noise level, light weight, low manufacturing cost and low power consumption. A system model for the manipulator ...