• 수산해양기술연구
• /
• 제36권1호
• /
• pp.25-32
• /
• 2000

A combination steering system was designed to provide the flexibility in controlling the steering wheel in fishing operations of the inshore and coastal fishing vessels. The designed steering system basically is consisted of three driving units, such as a electrically driven hydraulic pump unit with a solenoid control valve, a DC motor driven hydraulic pump unit and a manually driven hydraulic pump unit, and two controllers to provide remote steering on the deck, respectively. The steering torque was measured and analyzed to investigate the dynamic performance of the developed steering system. The steering system showed excellent linearity between the working pressure of cylinder and the torque of rudder post in case of increasing in rudder angle from $5^{\circ} to 35^{\circ}$ that is, the steering torque increased from $10.4 kgf{\cdot}m$ to $105.3 kgf{\cdot}m$ and then the working pressure of cylinder fluctuated from 6.3 kgf/cm super(2) to 16.4 kgf/cm super(2). The steering time of 3.2 sec in remote hydraulic steering by the on/off solenoid valve control was much faster than 13.2 sec in the manual steering by the helmsman and 11.6 sec in the electric steering by a DC motor, and then it was verified that operation of one unit does not affect other units in combination steering system in any way. Furthermore, the developed steering system can be remotely controlled in multiple stations of the deck during the fishing operation and the automatic pilot steering unit can be used to add hydraulic steering.

• 한국철도학회논문집
• /
• 제15권2호
• /
• pp.141-146
• /
• 2012

차륜과 레일의 반복적인 구름접촉은 레일 표면결함을 유발하고, 레일 표면결함은 충격하중을 유발하여 소음 진동, 레일파단, 궤도파괴로 이어지고 심할 경우 열차사고(탈선)를 발생할 수 있다. 이러한 레일 표면결함을 제어하기 위한 방법으로 레일연마가 시행되고 있다. 본 연구는 KTX차륜과 UIC레일에서 발생하는 최대 접촉압력을 유한요소해석을 통해 산정하였고, 일반레일 및 열처리레일에 대한 구름접촉피로시험을 수행하여 접촉압력 및 반복횟수에 따른 레일표면 경화층 형성 경향을 분석하였으며, 누적통과톤수에 따라 고속철도 레일에서 발생하는 표면 경화층을 제거하여 건전한 레일표면을 유지하기 위해 0.2mm/2천만톤의 적정 레일연마량을 제안하였다.

• 한국가스학회지
• /
• 제24권4호
• /
• pp.10-17
• /
• 2020

신뢰도 기반 평가법은 천연가스배관의 기하학적 형상 변화, 기계적 특성, 하중변화 및 운영조건을 평가 인자로 사용하여 천연가스배관의 건전성 평가 관리의 신뢰도를 향상시킬 수 있다. 구조신뢰성 평가 시 배관의 파손확률은 외부하중에 대한 배관재료의 저항성과의 관계에 의해 평가된다. COMREL 프로그램을 사용하여 내압, 열응력 및 굽힘응력과 같은 복합응력에 의한 천연가스배관의 파손확률을 평가했다. 천연가스배관의 파손확률 평가 시 매설깊이는 1.5~30m, 차량바퀴하중은 2.5~20톤, 온도차는 45℃, 운전압력은 6.86MPa 그리고 토양밀도는 1.8kN/㎥를 사용하였다. 천연가스배관의 파손확률은 Von-Mises 응력 기준에 의해 복합응력 하의 최대허용응력 기준으로 평가하였다.

• 소성∙가공
• /
• 제31권6호
• /
• pp.376-383
• /
• 2022

The potential damage region of a WC-Co cemented carbide die is investigated for cold forging process of a wheel-nut by numerical simulation with its chemical composition considered. Numerical simulation is utilized to calculate internal stress, especially for the WC-Co die, during the forging process. Finite element model is established, in which the elasto-plastic properties are applied to the work-piece of bulk steel, and elastic properties are considered for the lower die insert of the WC-Co alloy. This stress analysis enables to distinguish the potential damage regions of the WC-Co die. The regions from calculation are comparatively analyzed along with the crack area observed in the die after repetitive manufacturing. Effect of chemical composition of the WC-Co is also evaluated on characteristics of potential damage region of the die with variance of mechanical properties considered. Derived from Mohr-Coulomb fracture model, furthermore, a new stress index is presented and used for die stress analysis. This index inherently considers hydrostatic pressure and is then capable of deducing wide range of its distribution for representing stress state by modification of its parameter implying pressure sensitivity.

• 한국재료학회지
• /
• 제22권4호
• /
• pp.174-179
• /
• 2012

In this study, we demonstrated a simple and eco-friendly method, including mechanical polishing and attrition milling processes, to recycle sputtered indium tin oxide targets to indium tin oxide nanopowders and targets for sputtered transparent conductive films. The utilized indium tin oxide target was first pulverized to a powder of sub- to a few- micrometer size by polishing using a diamond particle coated polishing wheel. The calcination of the crushed indium tin oxide powder was carried out at $1000^{\circ}C$ for 1 h, based on the thermal behavior of the indium tin oxide powder; then, the powders were downsized to nanometer size by attrition milling. The average particle size of the indium tin oxide nanopowder was decreased by increasing attrition milling time and was approximately 30 nm after attrition milling for 15 h. The morphology, chemical composition, and microstructure of the recycled indium tin oxide nanopowder were investigated by FE-SEM, EDX, and TEM. A fully dense indium tin oxide sintered specimen with 97.4% of relative density was fabricated using the recycled indium tin oxide nanopowders under atmospheric pressure at $1500^{\circ}C$ for 4 h. The microstructure, phase, and purity of the indium tin oxide target were examined by FE-SEM, XRD, and ICP-MS.

• Tribology and Lubricants
• /
• 제27권5호
• /
• pp.269-274
• /
• 2011

The purpose of this paper is to study and analyze the improvement method for the failure examples including the vehicle brake system in actual field. It was verified that the indicator plate of pad wear scratched the brake disk because of wearing after displacement of non- identification parts pad. The caliper of other vehicle was installed with brake system verified the phenomenon produced groove in center point because of one side wear when the pad was not fully contacted with the rub disk by other action surface pressure and pad action condition. It verified that the crack phenomenon fatigue was produced by brake thermal deformation because of decreasing the thickness by grinding to modify the non-uniformed wear of brake disk. It verified that the friction sound was produced by the friction phenomenon because of non-uniformed contact of lining and an alien substance with inner of the drum and lining braking by crack phenomenon with brake drum surface.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.918-922
• /
• 2007

Aero-pulsation noise, generally caused by geometric asymmetry of a rotating device, is considerable source of annoyance in passenger cars using the turbocharged diesel engine. Main source of this noise is the compressor wheel in the turbocharger system, and can be reduced by after-treatment such as silencers, but which may increase the manufacturing cost. More effective solution is to improve the geometric symmetry over all, or to control the quality of components by sorting out inferior ones. The latter is more effective and reasonable than the former in view of manufacturing. So, an appropriate discrimination method should be needed to evaluate aero-pulsation noise level at the production line. In this paper, we introduce the accurate method which can measure the noise level of aeropulsation and also present its evaluation criteria. Besides verifying the reliability of a measurement system - a rig test system -, we analyze the correlation between the results from rig tests and those from vehicle tests. The gage R&R method is carried out to check the repeatability of measurements over 25 samples. From the result, we propose the standard specification which can discriminate inferior products from superior ones on the basis of aero-pulsation noise level.

• 소음진동
• /
• 제8권2호
• /
• pp.331-335
• /
• 1998

회전 상태에 있는 증기 터빈 버킷의 진동 시험 및 해석 결과를 본 논문에 기술하였다. 중고압용 터빈 로터에서 9단 휠 도브테일의 치수 변경으로 인해 9단 버킷의 치수 수정이 불가피하였고, 진동 시험과 해석은 수정된 9단 버킷의 고유 진동수가 노즐 통과 주파수로부터 공진을 피할 수 있는 주파수 분리 여유를 갖는지를 검정하기 위하여 이루어졌다. 해석은 상용 유한 요소 해석 프로그램을 이용하였고 실험 전 설계 변경의 성공 가능성 파악 및 후속 시험에 도움을 주기 위해 행하였다 진동 시험은 기존 밸런싱 설비를 이용해 진공 상태에서 회전하고 있는 버킷에 공기 분사 가진및 무선진동신호 측정 시스템을 이용해 행하였다. 시험 결과를 경험식의 결과와 비교하였고, 수정된 버킷이 제시된 주파수 분리 여유를 만족함을 보였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.535-538
• /
• 2005

Today, most fixed-wing aircrafts are equipped with the antiskid brake system. It can modulate braking moments in the wheels optimally, when an aircraft is landing. So it can reduce landing distance and increase safeties. The antiskid brake system for an aircraft are mainly composed of braking moment modulators (hydraulic control valves) and brake control unit. In this paper, a Mark IV type - fully digital - brake controller is studied. For the development of its control algorithms, a 5-DOF (Degree of Freedom) aircraft landing model is composed in the form of matlab/simulink model at first. Then, braking moment control algorithms using wheel decelerations and slips are made. The developed algorithms are tested in software simulations using state-flow toolboxes in matlab/simulink model. Also, a real-time simulation systems are made, which use hydraulic brake systems of a real aircraft, pressure control valves and its controller as hardware components of HIL(Hardware In-the-Loop) simulation. Algorithms tested in software simulations are coded into the controller and the real-time landing simulations are made in very severe road conditions. The real-time simulation results are presented.

• 생약학회지
• /
• 제17권1호
• /
• pp.12-18
• /
• 1986

In order to investigate experimentally the clinical effects of Choweesungchung-Tang that has been widely used in the cardiovascular and neuropsychogenic disease, experimental studies with experimental animals were carried out. The results of these studies were summarized as follows; Suppressive action was not shown on the convulsion induced by strychnine, but significant effect was noted on the convulsion induced by picrotoxin and caffeine. In acetic acid method, analgesic effect was noted. By the rotor rod and wheel cage method, sedative action was noted. A prolongation of hypnotic time induced by pentobarbital-Na was obtained. Relaxing action was noted remarkably on the ileum of mice, also about mice and guinea-pigs, the same effect was recognized on the smooth muscle of the ileum. The expansion of blood vessels by relaxation of smooth muscle and hypotensive action were noted.