• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.6
• /
• pp.1-9
• /
• 2013

For the manufacture of linerboard with 100% KOCC, we tried to increase the solid content of wet web by employing GCC (grounded calcium carbonate) in the fiber furnish to save drying energy. Three different diameters of GCC, namely, 5, 10, and $35{\mu}m$, were used. To complement the strength loss by the addition of GCC, cationic starch and refining treatment were tried. It was found that the addition of $10-35{\mu}m$ dia. GCC to KOCC for $180g/m^2$ basis weight sheets increased the solid content of the furnish about 1-1.5% with better bulk and drainage properties. The loss of strength properties were compensated by the application of cationic starch and/or refining process to the KOCC furnish. The dia. of GCC of $35{\mu}m$ was, however, too large to make smooth surface of the sample sheet. So, the optimization process was required before implementing the results to the mill by selecting proper diameter and shape of the calcium carbonate.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.20 no.1
• /
• pp.36-42
• /
• 2015

To determine the predation rate of threadsail filefish, we conducted feeding experiment of threadsail filefish, Stephanolepis cirrhifer on different life stages (medusae, ephyrae, and polyps) of Aurelia aurita s.l. in the laboratory. All size groups of threadsail filefish actively preyed on moon jellyfish Aurelia aurita s.l. and predation rate was proportional to the wet weight of threadsail filefish. Average wet weight 0.5, 1, 2.2 g of threadsail filefish preyed on average $0.77{\pm}0.51g\;fish^{-1}h^{-1}$ of medusae. Average wet weight 150 and 344 g of threadsail filefish preyed on $9.26{\pm}1.61$ and $15.89{\pm}3.67g\;fish^{-1}h^{-1}$ of medusae respectively. In ephyrae and polyps, average wet weight 3.7 g of juvenile of threadsail filefish preyed on 100 ephyrae within 10 minutes and average wet weight 2.2 g of juvenile of threadsail filefish preyed on $5.73{\pm}0.59$ polyps $g^{-1}$ of fish $h^{-1}$. Whereas adults of threadsail filefish did not prey on polyps. In feeding preference experiments to elucidate whether threadsail filefish prey on moon jellyfish in the sea, adults of threadsail filefish preyed on mostly oysters (ca. 60%) and polychaetes (ca. 80%). Medusae were consumed only 2% of total. However, juvenile of threadsail filefish preyed on ephyrae and polyps as well as mysid shrimps. Besides, polyps were consistently consumed during the experiment. Although juvenile of threadsail filefish consumed all kinds of prey, they ceased feeding at temperatures below $11^{\circ}C$, which suggests that possibility of predation on ephyrae may be very low in the sea because ephyrae are released at low temperatures below $11^{\circ}C$ from March to April. Whereas polyps are inhabitable in all seasons in Korean coastal waters, juvenile of threadsail filefish may prey on polyps in the sea. These results suggest that removing moon jellyfish at polyp stage by using juvenile of threadsail filefish is the most effective way for extermination of moon jellyfish.

• Journal of Korea Water Resources Association
• /
• v.54 no.9
• /
• pp.719-730
• /
• 2021

The objective of this study is to develop the water quality and aquatic ecosystem model for Andong lake using SWAT-WET (Soil and Water Assessment Tool-Water Ecosystem Tool) and to evaluate the applicability of WET. To quantify the pollutants load flowing into Andong lake, a watershed model of SWAT was constructed for Andong Dam basin (1,584 km²). The calibration results for Dam inflow and water quality loads (SS, T-N, T-P) were analyzed that average R² was more than 0.76, 0.69, 0.84, and 0.60 respectively. The calibrated SWAT results of streamflow and nutrients concentration was used into WET input data. WET was calibrated and validated for water temperature, dissolved oxygen, and water quality concentration (T-N, T-P) of Andong lake. The WET calibrated results was analyzed that PBIAS was +19%, -13%, +4%, and +26.5% respectively and showed that it was simulated to a significant level compared with the observation data. The observed dry weight (gDW/m²) of zoobenthos was less than 0.5, but the average value of simulation was analyzed to be 0.8, which is because the WET model considers zoobenthos with a broader concept. Although accurate calibration is difficult due to the lack of observed data, SWAT-WET can analyze the effects of environmental change in the upstream watershed on the lake based on long-term simulation based on watershed model. Therefore, the results of this study can be used as basic data for managing the aquatic environment of Andong lake.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.183-199
• /
• 2001

Alternative way of shaping fibers suitable for papermaking was introduced. Impact refining, which was done simply by hitting wet fibers with a metal weight vertically, was intended to keep the fibers from shortening and to cause mostly internal fibrillation. Virgin chemical pulp, its recycled one and OCC were used in the experiment. It was noticed from the experiment that impact refining on virgin chemical pulp kept the fiber length and Increased bonding properties greatly, However, in the recycled fibers from the chemical pulp, fiber length and bonding properties were decreased. In OCC, which seems to contain fractions of semi-chemical pulp and mechanical pulp (GP), and which is recycled pulp from corrugated boxes, fiber length and bonding properties were decreased disastrously. We believe recycled cellulosic fibers (recycled chemical pulp and OCC in this case), which went through hornification, were less resistant to the mechanical impact than virgin chemical pulp. For virgin chemical pulp, impact refining allowed no significant fiber length shortening, high WRV, and high mechanical strength.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2004.04a
• /
• pp.117-126
• /
• 2004

This paper presents a linear model for heat transfer processes in the drying cylinders and the web in papar mill. The PDE model, functions include steam temperatures, wet temperatures, moisture constents, reel speed and basis weight were derived from operation data. The changes of wet temperatures and moisture contents in the drying cylinders and wets could be described. The Transfer function can be obtained through the state space model derived from the linearized PDE model. Stability of the drying cylinder model for paper plants and analysis of characteristics of process responses for changes in input variables are investigated.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.2
• /
• pp.95-101
• /
• 2002

Matrix tablets of nifedipine (NP) were prepared with Eudragit, diluent (lactose or Ca. phosphate) and Mg. stearate employing two different preparation methods (wet granulation and direct compression) to develop its sustained-release dosage forms. The effects of various formulation factors on the dissolution rate of the drug were investigated. Dissolution test was studied in pH 6.8 phosphate buffer containing 1% sodium lauryl sulfate using the paddle method. Formulation factors were the type and content of Eudragit, the type of diluent and the tablet preparation method. The optimum formula of NP matrix tablet, which resulted in a similar dissolution profile to that from Adalat Oros used as a reference, was 30 mg NP, 10% Eudragit RS, 2% Mg. stearate and an adequate quantity of lactose to yield 500 mg weight using the wet granulation method.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.1 s.119
• /
• pp.8-15
• /
• 2007

In an effort to develop control strategies for the wet-end of paper machines, dynamic models for retention and formation processes have been developed. The retention process, including headbox total and filler consistencies, white water total and filler consistencies, the basis weight and the ash content of paper, can be modeled from first-principles (mass balances). To include the effect of wet-end chemistry variables, first-pass retention was included as a parameter dependent on operating conditions. In addition, dynamics of formation was simulated by developing an empirical model of formation and coupling with the dynamic models for the retention process. A series of experiments were performed using a pilot paper machine. The experimental results and the model predictions showed relatively good agreement.

• Fisheries and Aquatic Sciences
• /
• v.5 no.2
• /
• pp.127-135
• /
• 2002

Twenty seafood samples, which are common edible species and commercially important items in Korea, were purchased at the local fisheries markets and were analyzed for polycyclic aromatic hydrocarbons (PAHs) using gas chromatography coupled to mass spectrometer detector (GC/MSD). The levels of sixteen PAHs in seafood from Korean coasts were 161 to 2,243 pg/g wet weight. The highest concentration was found at saury (Coloabis saira) and the lowest level was found at jacopever (Sebastes schlegeli). The concentrations of potentially carcinogenic PAHs of six species were in the range of 9 to 123 pg/g wet weight. The residues of PAHs in fishes from Korean coasts were slightly low or relatively moderate to other countries. There was no correlation between PAH residues and lipid contents in seafood samples. The predominant contributors in fish samples were lower-molecular-weight two and three ring aromatic PAHs such as naphthalene, acenaphthene, fluorene and phenanthrene. Filter-feeding organisms like shrimp, crab and topshell were dominated by three- and four-ring aromatic PAHs. The PAH profiles in marine sediments, bivalves, fishes, shrimp, crab and topshell according to exposure pathway were compared through factor analysis. The PAH profiles were clearly classified by the difference of species or environmental matrices. This result suggests that most of PAHs within the same samples behave identically in marine environment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.25 no.4
• /
• pp.1-9
• /
• 1980

To determine the optimum harvest time of recent rice varieties from Indica/Japonica remote crosses, leading varieties Suweon 264 and Milyang 23 were tested for the changes in dry matter weight and moisture content of grain, shattering, shelling ratio, milling ratio, and apparant physical quality during grain development at 5 day-intervals from 20 days to 55 days after heading. The results are summarized as follows: 1. Grain weight (dry matter) reached its maximum (physiological maturity) at 30 days after flowering (DAF) in Suweon 264, and at 35 days in Milyang 23, and thereafter it did not change significantly until 55 DAF. 2. Time course of decrease in grain moisture content (Y, %) during maturation (X, DAF) consisted of two linear phases, i.e. a fast and a slow period: Y=68.245-1.33X until 34DAF, and Y=23.025-0.470X until 55DAF after 34DAF in Suweon 264; Y=73.62-1.634X until 24.5DAF, and Y=33.59-0.570X until 55DAF after 24.5DAF in Milyang 23. Two varieties showed the same grain moisture content of 28% (wet basis) at physiological maturity in spite of the distinct differences in the heading date, time of physiological maturity and thereby ripening climate. 3. Force to shatter a grain ranged about 90 to 100g in Milyang 23, and about 200 to 250g in Suweon 264 and in a Japonica variety, Jinheung. The force, however, did not change significantly with harvest time from 35DAF to 50DAF. 4. The changes in the ratios of shelling, milling, broken rice and tinted rice with harvest time were insignificant during a period from 35DAF to 55DAF. However, ratios of green rice and white belly rice decreased significantly with delay in harvest time during 10 days after physiological maturity. 5. The best time of harvest for maximum yield and good quality is thought to be 10 days after physiological maturity, and grain moisture content at this time was about 20% on wet basis.

• Journal of the East Asian Society of Dietary Life
• /
• v.15 no.4
• /
• pp.450-456
• /
• 2005

This study was performed to provide basic data that will predict the usefulness of buckwheat sprout as food materials. The quality characteristics of noodles prepared with buckwheat sprout powder were investigated The buckwheat sprout powder was added to the noodles in 0, 2, 4, 6, and $8\%$ in proportion to the weight of wheat flour, respectively. The added amounts of buckwheat sprout powder did not affect the volume of the noodles. The weight of noodles was decreased, whereas tumidity of the soup after cooking the noodles was increased with the increment of the amount of added buckwheat sprout powder. The color of powder mixture, wet noodles, and cooked noodles was changed by the addition of buckwheat sprout powder. Lightness(L) was decreased, whereas yellowness(b) and redness(a) increased as the amount of buckwheat sprout powder increased. In the texture analysis, hardness and chewiness of wet noodles were increased significantly by the addition of buckwheat sprout powder. Hardness, chewiness, and gumminess increased significantly in the cooked noodles with more than $6\%$ substitution of buckwheat sprout powder. Other textural properties did not show any significant changes. The results of sensory evaluation revealed that the overall preference of noodles with 2 to $4\%$ substitution of buckwheat sprout powder was better than other sample groups. Therefore, the appropriate amount of addition for the buckwheat sprout noodles was 2 to $4\%$ buckwheat sprout powder in proportion to the weight of wheat flour.