• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.111-120
• /
• 2006

Opening size of 3 types of geotextile were tested using dry and wet sieving methods to evaluate characteristics of test methods and to compare the test results. Judging from test results, dry sieving method is a poor test, having many problems causing many errors but a simple-quick test. Wet sieving method is a very specific test avoiding many of the problems of dry sieving such as electrostatic charges, trapping in the geotextiles and so on. However, one of wet sieving tests, KSK ISO12956, takes long time to complete a test and is too strict to handle loss of granular material. Generally, opening size of a geotextile by wet sieving test is smaller than that of dry sieving test. Especially, opening size by KSF 2126 which is one of wet sieving test but disused at present anymore is similar or smaller than that by KSK ISO12956 method.

• 펄프종이기술
• /
• 제37권3호
• /
• pp.33-40
• /
• 2005

In this study, a nano-colloidal silica sol was applied to control the anti-slip property by spraying on kraft paper. Two kinds of nano-colloidal silica sol which have cationic and anionic charge were applied in kraft paper, and the friction and physical strength properties of kraft paper were investigated. The application of colloidal silica sol on wet web in wet-end process by spraying method was tried to improve the friction property and to avoid the general problems of machine contaminations caused by the scattering of sprayed silica particles in dryer part. The physical properties of sheet were also improved by the application of wet web spraying method, and the optimum conditions of wet web spraying operation were closely related with the conditions of pH and electrical charge of wet web and silica sol.

• 한국안광학회지
• /
• 제20권4호
• /
• pp.455-462
• /
• 2015

목적: 친수성 콘택트렌즈 정점굴절력 측정 방식중 하나인 wet cell 측정법을 활용한 국산화 측정 홀더와 프로그램 개발에 관한 연구를 위해 현재 사용되어지고 있는 Poster wet cell 홀더와 함수율별 굴절력의 측정값을 비교 분석하였다. 방법: 안경원에서 사용 중인 기존 제품과 새롭게 개발된 국산제품에 식염수를 채워 넣고 소프트콘택트렌즈의 굴절력을 측정하였다. 실험에 사용한 친수성 콘택트렌즈는 안경원에서 많이 사용되고 있는 국내산 렌즈를 사용하였으며, 함수율별과, 구면굴절력별로 분류하여 각각 실험하였다. 결과: wet cell 방식으로 콘택트렌즈 굴절력 측정 시 새롭게 개발한 홀더의 경우 자동렌즈미터를 사용하여 굴절력을 측정한 결과 -3.00 D에서 함수율 38%는 -3.01 D, 함수율 45%는 -3.00 D, 함수율 58%는 -2.98 D로 측정되었으며, Poster wet cell 홀더를 사용하여 렌즈를 측정한 결과 -3.00 D에서 함수율 38%는 -3.60 D, 45%는 -3.06 D, 58%는 -2.46 D로 각각 측정되었다. 결론 : 고함수율에서 굴절력 측정값은 wet cell 방식의 두 홀더 모두 낮게 나타났으며, 새롭게 개발된 홀더와 프로그램을 통한 자동렌즈미터의 측정값이 기존의 Poster soft contact lens wet cell 측정방식에 비해 더 정확한 굴절력 측정 결과를 나타내었다.

• 한국지반공학회논문집
• /
• 제23권2호
• /
• pp.19-27
• /
• 2007

본 연구에서는 한국산업규격에서 제안하고 있는 건식방법과 습식방법을 이용하여 국내 플라스틱배수재 필터로 가장 많이 사용하는 토목섬유 3종류의 유효구멍크기를 평가하고, 시험 수행 과정에서 나타난 각 시험 방법의 특징과 시험 결과를 비교 분석하였다. 시험 결과에 의하면, 건식방법은 신속하고 간단한 시험방법이지만 상대적으로 많은 오차가 발생하는 등 좋지 않은 방법으로 나타났다. 반면에, 습식방법은 정전기 발생이나 섬유 내의 갇힘 현상 등 건식방법에서 나타나는 많은 오차를 줄일 수 있는 방법으로 판단되었다. 그러나 습식방법의 한 방법인 KS K ISO 12956의 경우, 시험에 오랜 시간이 소요되며 시험 중 사용 흙의 손실에 대한 기준이 매우 까다로운 것으로 나타났다. 일반적으로 습식방법으로 구한 토목섬유의 유효구멍크기는 건식방법으로 구한 유효구멍크기보다 작은 것으로 나타났으며, 특히 현재 사용하지 않는 방법인 수리동역학적인 방법 KS F 2126로 구한 유효구멍크기는 KS K ISO 12956방법으로 구한 유효구멍크기와 비슷하거나 작은 것으로 나타났다.

• Journal of Applied Biological Chemistry
• /
• 제42권4호
• /
• pp.175-179
• /
• 1999

Grape seed oil was extracted using different preparatory treatments as follows: (1) grinding, (2) grinding and roasting, (3) grinding and wet- roasting, (4) grinding, roasting, and wet-roasting, and (5) grinding, wet-roasting, and wet-roasting. The highest antioxidant activity was obtained from the sample with the method (2). Initial states of oxidation were similar except method (1) that showed more oxidized state, being P.O.V.8. Acid values were observed in the range from 1.42 to 1.89. The lowest acid value was found as 1.42 in method (1) and those of others were somewhat higher, indicating that heating process of roasting produced some free fatty acids. From the results of sensory evaluation, the best odor and taste were obtained from the methods (2) and (3). Repetitive procedure of wet-roasting, like method 5, caused some loss of flavor components and decrease in the sensory evaluation score. Addition of grape seed oil (method 2) to soybean and perilla oil at the level of 20% retained considerable antioxidant activities as much as 4.3 and 5 times, respectively, than 100% soybean or perilla oil stored for 12 weeks. When soybean or perilla oil was mixed with 20% grape seed oils, P.O.V. decreased to half of that of unmixed oils.

• 한국해양공학회지
• /
• 제6권2호
• /
• pp.113-124
• /
• 1992

The offshore industry created a need for quality wet weld repairs. Wet welding is a fast method of repair providing sound, structural quality welds. It requires less support equipment than a similar underwater dry weld repair or the alternative mechanical connections. Compared to welds made in air, underwater wet welds are plagued by increased hardness due to rapid quenching by the surrounding water. In this paper is described the experimntal study of improving the cooling rates of wet welds of TMCP steel plate by shielding around weld arc surroundings. The principal results of this experimental investigation can be summarized as follows : By shielding around weld arc surrounding, the cooling rates resulting from wet welds on TMCP steel plate could be lower than that of nonshielded wet welds and the fesibility on high quality of mecanical properties of wet weld on TMCP steel plate was carried out with shielded weld arc surrounding.

• Environmental Engineering Research
• /
• 제24권1호
• /
• pp.137-143
• /
• 2019

In this study, extraction, clean-up and instrumental analytical conditions were optimized for identifying and quantifying methyl-, chloromethylbenzi-, octyl- isothiazolinone (MIT, CMIT, BIT, OIT) and 3-iodo-2-propynyl butyl carbamate (IPBC), widely used biocidal active ingredients in human hygiene consumer products. Accuracy of the developed ultrasonic assisted extraction method followed by HPLC/MS analysis for four isothiazolinones and IPBC ranged between 60.4% and 113% in various types of consumer product samples. Method detection limits ranged 0.011-0.034 mg/kg for wet wipes, 0.57-1.5 mg/kg for liquid detergent and 0.58-1.6 mg/kg for powder detergent. Wet wipes, powder and liquid detergents collected from local market in Korea were analyzed to demonstrate the applicability of the developed method. Even after the regulation of those compounds in wet wipes, CMIT, MIT and IPBC were still frequently detected from complementary wet wipes without brand labels which were distributed to customers at local retail shops and restaurants. The maximum observed concentrations of MIT and CMIT found in those complementary wet wipes were 70.2 mg/kg and 11.3 mg/kg, respectively.

• 한국세라믹학회지
• /
• 제28권11호
• /
• pp.843-850
• /
• 1991

There is a growing demend for absorptive electromagentic shielding materials for wide band frequency application. In this study, the absorber which consists of a rubber plus Ni-Zn ferrite which have been prepared by direct-wet method. A rubber ferrite composite for electromagnetic shielding, it is most importan facter the homogeneous ultra fine size and high dispersitive ferrite powder. Direct-wet method and solid-solid reaction method for preparing of ultra fine ferrite powder was used. It has been experimentally verified that the powder which prepared by direct-wet method was very fine and almost same size spherical powder, the composite ferrite have excellent electromagnetic wave absorption in X-band.

• Journal of Mechanical Science and Technology
• /
• 제20권9호
• /
• pp.1475-1482
• /
• 2006

Wet compression means the injection of water droplets into the compressor of gas turbines. This method decreases the compression work and increases the turbine output by decreasing the compressor exit temperature through the evaporation of water droplets inside the compressor. Researches on wet compression, up to now, have been focused on the thermodynamic analysis of wet compression where the decrease in exit flow temperature and compression work is demonstrated. This paper provides thermodynamic and aerodynamic analysis on wet compression in a centrifugal compressor for a microturbine. The meanline dry compression performance analysis of centrifugal compressor is coupled with the thermodynamic equation of wet compression to get the meanline performance of wet compression. The most influencing parameter in the analysis is the evaporative rate of water droplets. It is found that the impeller exit flow temperature and compression work decreases as the evaporative rate increases. And the exit flow angle decreases as the evaporative rate increases.

• 한국해양공학회지
• /
• 제2권1호
• /
• pp.125-134
• /
• 1988

The feasibility for improving the cooling rates and mechanical properties of wet welding process is experimentally investigated by using new developed underwater wet electrodes and H.T. steel plates. Main results of this experimental study can be summarized as follows; 1) By shielding around weld arc surrounding, the cooling rates resulting from wet welds with developed electrodes on TMCP steel plates can be lower than of non-shielded wet welds. 2)A high quality of mechanical properties of wet welds on TMCP steel plates can be obtained with shielded weld arc surrounding.