• Membrane Journal
• /
• v.29 no.2
• /
• pp.105-110
• /
• 2019

Porous membranes are widely used in industry for removing particulate matter. Unlike conventional porous membrane fabrication methods, the solution spreading phase separation method can form pores very simply. The first step is to wet the mesh with the support layer, then to let the polysulfone solution flow into a solvent without water. The solvent is readily vaporized and the polysulfone is made into a thin film. When the polysulfone solution is mixed with water to form pores, the pore size can be adjusted according to the concentration ratio of the polysulfone solution. The thickness of the membrane is easily controlled by the concentration of the solution. The porous separator has the formation of meshes intact and is very useful for forming a three-dimensional structure. The solution spreading phase separation method proposed in this study is characterized by its high cost competitiveness compared with conventional membranes due to its low production cost and easy process control.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.2
• /
• pp.9-15
• /
• 2024

The effect of the residual impurity on the prepreg surface on the wettability of encapsulant for chip on board package was analyzed with microstructure, compositions and chemical bonds using a scanning electron microscope and X-ray photoelectron spectroscopy. As a result, the contact angle of w/ residual impurity sample was measured to be 28° higher than that of w/o residual impurity sample, and the C-O bond was decreased to be 4% lower than that of w/o residual impurity sample. The surface energy of the prepreg decreased because the impurity ions, Na and F, generated by the manufacturing process and wet etching, reacted chemically with the C on the prepreg surface, forming C-F bonds and breaking the C-O bonds on the prepreg surface. Therefore, the wettability of the encapsulant was degraded because the contact angle between the encapsulant and the prepreg was increased.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.180-188
• /
• 1982

This study was carried out to make hardboard fire retardants and to examine the properties of the hard-board treated with them. The fire retardant treatment was achieved by surface impregnation of water soluble retardant chemicals into the forming mat with 55 percent of moisture content. followed by the hot pressing process. Ammonium monophosphate, ammonium diphosphate, sodium borate, and boric acid were used as the fire retardants. Fire retardant test was carried out by using the differential thermal analysis thermogram. The results are summarized as follows: 1. Fire retardant-treated hardboard showed higher values of the specific gravity. water absoption, and flexural strength than those of untreated hardboard. Especially, the treatment of ammonium monophosphate gave the best results in the flexural strength, and a 10 gr/$ft^2$ loading of the fire retardant compound of ammonium monophoshate, ammonium diphosphate, and sodium borate drew the best flexural strength value among the three different experimental loadings of 10, 20 and 30 gr/$ft^2$. 2. There were no definite differences in moisture content between the fire retardant-treated hardboard and the untreated hardboard. 3. The fire retardant compound of ammonium monophosphate, ammonium diphosphate, and sodium borate resulted in the best fire retardancy, and its fire retardancy was increased in proportion to the increase of loading.

• The Journal of Natural Sciences
• /
• v.8 no.1
• /
• pp.61-69
• /
• 1995

It is hard to synthesize pure $BaTiO_3$ from $BaCO_3$ and $TiO_2$ in solid reaction for the activity of BaO and secondary phase. For this reason, the wet chemical techniques have been studied. Starting material which was used in these methods were expensive and the properties of powder which was synthesized in same defined. So, some process have been studying again to improve soild reaction method. This study which was one of those was to defin the forming mechanism of $Ba_2TiO_4$ and to control some condition of $Ba_2TiO_4$. The synthesis temperature of $BaTiO_3$ in solid reaction was near $1120^{\circ}C$. The quantity and forming temperature of $Ba_2TiO_4$ could be controlled by atmosphere heat treatment. $Ba_2TiO_4$ was related to expansion in Ba-rich region of $BaTiO_3$. $BaTiO_2O_5$ and $BaTiO_3O_7$ was reason to expand in Ti-rich region. The dielectrics of $CeAIO_3$ which was synthesized and sintered in reduction atmosphere and $BaTiO_3$ system were affected by $CeO_2$ which was formed for the decomposition of $CeAIO_3$ heat treatment in air.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.12
• /
• pp.5-15
• /
• 2011

Conventional designs of landfill covers use geosynthetics such as geomembrane and GCL, and clay liners to lower the permeability of final covers of landfill sites. However, differential settlement and the variation of temperature or humidity in landfill sites cause the development of cracks or structural damage inside the final cover. This study examined the application of a Self Recovering Sustainable Liner (SRSL) as an alternative landfill final cover material. SRSL consists of double layers, which have chemicals, can generate precipitates filling the pores of the layers by chemical reaction. The interface material forms an impermeable layer and in case of internal cracks, the reactants of the two layers migrate towards the crack and heal it by forming another liner. In this study the applicability of SRSL material for landfill final cover was examined by performing flexible wall permeameter tests to prove that the hydraulic conductivity is lower than the regulations and unconfined compression tests to judge whether the strength satisfies the restriction for the landfill final cover. Furthermore, the environmental impacts on the permeability and strength were evaluated. The experimental results show that the SRSL has lower hydraulic conductivity and higher strength than the regulations and is little influenced by climatic changes such as wet/dry or freeze/thaw process.

• Journal of East-West Nursing Research
• /
• v.2 no.1
• /
• pp.96-106
• /
• 1997

In Chinese medicine, the activities of removing and solving the inner cause are called the regimen in preventing the disease and the good condition of mind emphasizes us to practice ourselves the doctrine of regimen of the mind to promote the health and long life of the living body, in other words, it means we should have clean mind, less desire, less thought, less agony and widely open our emotion and will, and it also means the raising of good nature, the moral cultivation, and we can be healthy when we live by good virtus as the root of regiem. The meaning of the Qi has been expanded more and more since its origination throught the process of practice and perception of man. 1) Matter is changed to the smoke when burned, the energy of water becomes the rain in the sky and the rain raises all living creatures by making them wet. Throught these changes of circulation, men could realize the energy to be the common and original matter of forming all the creatures. 2) The direction of showing the breathing of men in and out has been expended. 3) It was widely understood as the meaning of showing vitality of men, and it was the original root of chinese medicine. 4) It was expended to be showing spirit of nature such as the sun, moon, star, sky, land, mountain and the moral spirit of men as peacefullness. By the original meaning of the word of energy expanded to the wider side of sky, land, men and things, nature, society, man and the moral spirit could get the unified basis of the matter. As the above, the word of Qi has been used in wider meaning at this time from the past. In other words, all things in the universe come into being and extinct by the chang of motion of the Qi and it is recognized to be the living activity in human body. The Qi-kong based on this energy and the motion applied to our daily life are very extensive (Lee, Hye - lung, 1997). Here are the summaries of the effect of the Qi-kong ; 1) The physical constitution is strenthened, physiological function is prosperous and we are free from various geriatric disease and psychosomatic disease not to mention the cold and indigestion. 2) It maintains the clear spirit, elevates intelligence, strengthens the spiritual power and demonstrates the potentiality at the amximum. 3) It maintain beautiful figure and clean skin never losing the charm but full of energy and vitality. 4) It keeps the balanced body never suffering from the unbalance of the bones, various and neuralgia. 5) It maintain the spiritual comfort, the natural posture in everything and real happiness (Lee, Hye-Jung, 1997 : Suh, Yong Kyu, 1989). Chinese medicine mentions the motion by Qi with Qi - kong. But the motion does not require special method in Western medicine. I t is the only way of living of our ancestor indaily life. It is maintaining the healthy lifr by training the Qi, and it is the motion of being with the nature with the open mind in breathing rather than artificially restricting our daily life, it is the motion of the body.