• 한국대기환경학회지
• /
• 제7권3호
• /
• pp.145-149
• /
• 1991

A one dimensiional cumulus cloud model has been developed for the investigation of temporal and altitudinal variation of trace gases and the wet deposition rates of sulfate for different simulation conditions. The results show that the dynamic field, liquid mixing ratios and the solubility of trace gases affect the distribution of trace gases and the droplet pH. Temporal variation of the predicted surface precipitation and sulfate deposition rates agree well with the field data.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2000년도 추계학술대회 논문집
• /
• pp.94-95
• /
• 2000

PCBs(polychlorinated biphenyls)와 BHCs(benzene hexachlorides)와 같은 SOCs(semivolatile organic compounds)는 모든 대륙에서 검출되어지고 있으며, 심지어 장거리 수송에 의해 청정지역인 북극에서도 검출되고 있다. 이들 성분들은 친지질성(lipophilic)으로 대부분이 가스상으로 존재하여 식물의 표면에 존재하는 지질(lipid)에 건성침착(dry deposition) 또는 습성 침착(wet deposition)된다. 이렇게 침착된 성분들의 농도는 대기중 농도와 밀접한 관계가 있다고 보고되고 있다(천만영,1998; Simonich and Mites, 1995). (중략)

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2001년도 추계학술대회 논문집
• /
• pp.443-444
• /
• 2001

대기오염물질이 대기중에 배출되게 되면 그 일부는 오염 발생원의 인접한 지표면에 건성 침착하여 제거되지만 그 대부분은 장거리 이동하면서 2차 오염물질로 변환되어 건성침착 (dry deposition)하거나 강수시 습성 침착 (wet deposition)에 의해 지표면으로 제거된다 (원 굉, 1991, Legge and Krupa, 1990). 습성침착의 대표적인 형태로는 강우와 강설이 있으며, 이것은 대기중 오염물질이 지표로 제거되는 중요한 경로라 하겠다. (중략)

• 한국진공학회지
• /
• 제17권1호
• /
• pp.73-79
• /
• 2008

투명 전도성 산화물 전극(transparent conductive oxide electrodes)에 적용하기 위하여 RF 마그네트론 스퍼터링 방법에 의해 유리 기판 위에 산화아연 박막을 증착하였다. 투명 전극으로써 응용되기 위한 최적의 조건으로 기판온도를 상온으로 유지하고 RF power 200 W, 타겟과 기판사이의 거리(Dts)가 30 mm일 때 증착된 산화아연 박막으로부터 가장 낮은 비 저항값($7.4{\times}10^{-3}{\Omega}cm$)을 얻어 낼 수 있었으며, 85% 이상의 높은 투과율을 만족하는 박막을 얻을 수 있었다. 실질적인 소자로써의 응용을 위해 photo lithography를 통한 pattern을 형성, 습식 식각을 통하여 그 특성을 알아보고자 하였다. 습식 식각에서 사용된 식각용액(etchant)으로는 다양한 산 용액(황산, 옥살산, 인산)을 사용하였으며, 산의 농도 변화에 따른 식각특성과 식각시간 및 식각 이미지(표면형상)의 변화를 알아보았다. 결과적으로 산화아연의 습식식각은 산의 종류와 무관하게 산 용액의 농도(즉, pH)에 크게 의존하며, pH가 증가함에 따라 식각율이 지수함수적으로 감소하고 아울러 다양한 식각 이미지가 나타남을 최초로 고찰할 수 있었다.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.696-706
• /
• 2023

Consequences of an anticipated Beyond Design Basis Accident (BDBA) Long-Term Station Blackout (LTSBO) event with complete loss of grid power in the VVER-1200 reactor of Rooppur Nuclear Power Plant (NPP) of Unit-1 are assessed using the RASCAL 4.3 code. This study estimated the released radionuclides, received public radiological dose, and ground surface concentration considering 3 accident scenarios of International Nuclear and Radiological Event Scale (INES) level 7 and two meteorological conditions. Atmospheric transport, dispersion, and deposition processes of released radionuclides are simulated using a straight-line trajectory Gaussian plume model for short distances and a Gaussian puff model for long distances. Total Effective Dose Equivalent (TEDE) to the public within 40 km and radionuclides contribution for three-dose pathways of inhalation, cloudshine, and groundshine owing to airborne releases are evaluated considering with and without passive safety Emergency Core Cooling System (ECCS) in dry (winter) and wet (monsoon) seasons. Source term and their release rates are varied with the functional duration of passive safety ECCS. In three accident scenarios, the TEDE of 10 mSv and above are confined to 8 km and 2 km for the wet and dry seasons, respectively in the downwind direction. The groundshine dose is the most dominating in the wet season while the inhalation dose is in the dry season. Total received doses and surface concentration in the wet season near the plant are higher than those in the dry season due to the deposition effect of rain on the radioactive substances.

• 한국표면공학회지
• /
• 제50권6호
• /
• pp.523-530
• /
• 2017

In this study, we developed the h-BN interphase for ceramic matrix composites (CMCs) through a wet chemical coating method, which has excellent price competitiveness and is a simple process as a departure from the existing high cost chemical vapor deposition method. The optimum condition for nitriding an h-BN interphase using boric acid and urea as precursors were derived, and the h-BN interphase coating through a wet method on a carbon preform of 2.5 D was conducted to apply the optimum conditions to the CMCs. In order to control the coating property via the wet coating method, four parameters were investigated such as dipping time of the specimen in the precursor solution, the ratio of boric acid and urea in the precursor, the concentration of solution where the precursor was dissolved, and the cycle of dipping and dry process. The CMCs was fabricated through polymer impregnation and pyrolysis (PIP) processes and a three-point flexural strength test was conducted to verify the role of the coated h-BN interphase.

• Journal of Korean Society for Atmospheric Environment
• /
• 제21권E3호
• /
• pp.87-94
• /
• 2005

Wet scavenging by rain drops is a most important removal process of air pollutants. In order to study the scavenging mechanisms of aerosol particles, the characteristics of chemical components in the rain water were examined as a function of the amount of rainfall. Rain water were collected continuously and separated into the soluble and insoluble components. The elemental concentrations in both components were determined by a PIXE analysis. The physical and chemical characteristics of atmospheric aerosols during the rainfall events were measured simultaneously. The elemental concentrations in rain water decreased substantially just after rain started and then gradually declined in subsequential rain fall exceeding 1.0 mm. The large particles were scavenged more easily than the fine particles. Fe, Ti and Si in rain water were in high insoluble state. Contrarily, almost whole of S was dissolved in rain water.

• 한국환경과학회지
• /
• 제15권2호
• /
• pp.121-131
• /
• 2006

Atmospheric bulk (wet and dry) samples were monthly collected in Masan and Heangam areas of Korea, to assess the deposition flux and seasonal variation of polycyclic aromatic hydrocarbons (PAHs). Deposition fluxes of PAHs in bulk samples were determined using gas chromatography coupled to mass spectrometer detector (GC/MSD). Particle deposition fluxes from Masan and Haengam areas varied from 13 to $87\;g/m^2/year$ and from 5 to $52\;g/m^2/year$, respectively. PAHs deposition fluxes in atmospheric bulk samples in Masan and Haengam areas ranged from 135 to $464\;{\mu}g/m^2/year$ and from 62.2 to $194\;{\mu}g/m^2/year$, respectively. Atmospheric deposition fluxes of particles and PAHs in this study were comparable to or slightly lower values than those from different locations in Korea and other countries. PAHs profiles of atmospheric deposition bulk samples showed slightly different from two sampling areas, however the predominant species of PAHs were similar. Indeno (1,2,3-c,d)pyrene, benzo(g,h,i)perylene, phenanthrene compounds were the most detected PAHs in deposition bulk samples. Carcinogenic PAHs occupied the contribution of approximately $30-40\%$ of the total PAHs deposition fluxes. The non-metric multi-dimensional scaling (MDS) was used, to assess the differentiation of PAHs source between two sampling areas. The result suggests that PAHs contamination sources were different according to the location and season surveyed. There was no an apparent relationship between the PAHs deposition flux against temperature and rainfall amount, even though summer season with the highest temperature and the largest amount of precipitation showed the lowest PAHs deposition flux. Benzo(e)pyrene/benzo(a)pyrene ratio indicated that the photo-degradation process was one of important factors to the seasonal variation of PAHs with the lower deposition fluxes.

• 한국환경과학회지
• /
• 제13권5호
• /
• pp.469-478
• /
• 2004

Atmospheric bulk (wet and dry) samples were monthly collected in an urban environment (Daeyeon-dong) of Busan over a year, to assess the deposition flux and seasonality of dioxin-like polychlorinated biphenyls (DLPCBs) using stainless steel pots. Deposition fluxes of DLPCBs in bulk samples were determined using high resolution gas chromatography coupled to high resolution mass spectrometry (HRGC/HRMS). Particle deposition fluxes in the urban environment varied from 23 to 98 $mg^2$/year (mean 41 $gm^2$/year). DLPCB deposition fluxes in atmospheric bulk samples ranged from 0.09 to 0.77 ng-$TEQ/m^2$/year (mean 0.35 ng-$TEQ/m^2$/year). Seasonal atmospheric deposition fluxes of DLPCBs were high in winter and low in summer. Atmospheric deposition fluxes of particles and DLPCBs in this study were comparable to or slightly lower values than those of different locations in the world. Monthly DLPCB profiles in deposition bulk samples were similar over a year. Non-ortho PCBs were higher contributions to the total DLPCBs fluxes than mono-ortho PCBs. In particular, PCB 126 had the highest concentrartion (>75%) in all deposition samples, followed by PCB 169 and PCB 156. A highly positive correlation was found among the deposition fluxes of DLPCB species, suggesting the possibility of that the DLPCB contamination originated from one source. The deposition fluxes of DLPCBs were not significantly correlated with temperature and the amount of precipitation even though the summer season with the highest temperature and the largest amount of precipitation showed the lowest DLPCB deposition flux.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2007년도 추계학술대회 논문집
• /
• pp.197-199
• /
• 2007