• 한국환경과학회지
• /
• 제5권3호
• /
• pp.285-295
• /
• 1996

In genneral, Businger expression is used for determining a turbulance diffusion coefficient. In this study, it is applied to the surface elements of cities such as Asphalt, Cround, Grass, Pond. We set up 5 m-height bar and measured the ary temperature and wet temperature at 도 height of 0.13, 0.27, 0.5, 1, 0, 3.0, 5.0m. In addition we measured the wind gradient and wind velocity at the height 3 m solar radiation continuously for 48 hours on the surface. Compared the measured data to Businger expression the result showed that Businger expression can be well applied to the complex surface of the city.

• 펄프종이기술
• /
• 제31권3호
• /
• pp.60-67
• /
• 1999

The CLSM and the image analysis technique enhanced observation of fiber wall fibrillation occurred in both the outer and the fiber wall surfaces during refining by non-destructive techniques. In the early stages of refining, it was well observed that a partial separation between the S1 and S2 layer in the secondary wall was made generating a space in the wet fiber walls . With further refining, it was clearly shown that the shear forces imparted by the refiner bar surfaces caused the S1 layer to become totally separated from the S2 layer as well as creating microfibrils. Furthermore, the fibrillation in the inner fiber wall surfaces could be due to the normal force (Fn) by refiner bars, friction force between a fiber and refiner bars (Fs) and inner friction force between fiber walls(fs). It was confirmed that the concept of fibrillation should be extended to fibrillation in the inner fiber wall surfaces as well as internal and external fribrillation.

• 펄프종이기술
• /
• 제32권3호
• /
• pp.1-9
• /
• 2000

The MDDA (Modified Dynamic Drainage Analyzer) was developed to evaluate the drainage characteristics on paper machine. The initial forming vacuum velocity was decreased with the increase of stock consistency and there were no significant effects of the applied vac-uum. On the other hand the initial forming drainage velocity was rapidly decreased with the increase of stock consistency above the 0.35 bar of applied vacuum. The final drainage time and wet web permeability showed similar trends under 0.075% consistency but increased rapidly at the higher consistencies. SFR(Specific Filtration Resistance) and drainage obtained for different vacuum level applied and deposited weights measured by using MDDA showed the linear relationship.

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4620-4624
• /
• 2022

Several cadmium zinc telluride (CZT) crystals were fabricated into radiation detectors using methods that included slicing, dicing, lapping, polishing, and chemical etching. A wet passivation with sodium hypochlorite (NaOCl) was then carried out on the Br-etched detectors. The Te-rich layer on the CZT surface was successfully compensated to the Te oxide layer, which was analyzed with X-ray photoelectron spectroscopy data of both a Br-etched crystal and a passivated CZT crystals. We confirmed that passivation with NaOCl improved the transport property by analyzing the mobility-lifetime product and surface recombination velocity. The electrical and spectroscopic properties of large volume detectors were compared before and after passivation, and then the detectors were observed for a month. Both bar and quasi-hemispherical detectors show an enhancement in performance after passivation. Thus, we could identify the effect of NaOCl passivation on large volume CZT detectors.

• Korean Chemical Engineering Research
• /
• 제43권1호
• /
• pp.27-32
• /
• 2005

본 연구에서는 다양한 공용매로 변형된 초임계 이산화탄소를 이용하여 웨이퍼 표면에 존재하는 이온주입 포토레지스트(IIP, ion-implanted photoresist) 및 잔류 불순물의 제거 공정을 97, 148, $200^{\circ}C$의 온도와 200, 300, 400 bar의 압력조건에서 수행하였다. 이온주입 포토레지스트는 순수 초임계 이산화탄소에 의해 제거되지 않았으나 팽윤(swelling)되는 것을 확인할 수 있었다. 또한, 단일 공용매 및 비양성자성 용매들의 혼합 공용매로 변형된 초임계 이산화탄소 시스템은 이온주입 포토레지스트를 팽윤시키나, 제거에 효과적이지 못하였다. 그러나 DMSO에 DIW가 혼합된 혼합 공용매(5%, v/v)로 변형된 초임계 이산화탄소 시스템은 $97^{\circ}C$, 200 bar의 온도, 압력 조건에서 30분 동안 세정 실험을 수행한 결과 이온 주입 포토레지스트의 제거에 효과적이었다(약 80%). 본 연구에서 사용된 혼합 공용매로 변형된 초임계 이산화탄소 시스템은 플라즈마 애싱(ashing) 및 산과 용매가 기본이 되는 습식 세정 방법의 대안으로서 화학액의 사용과 폐수를 감소시킬 수 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.953-956
• /
• 2008

국내 초고층 프로젝트의 증가에 따라 필연적으로 고강도 콘크리트의 사용이 증가되고 있다. 콘크리트의 강도가 증가됨에 따라 화재시 단면결손을 유발하는 폭렬의 경향성이 커지고, 콘크리트부재 내부의 온도를 현저하게 증가시키며 심각한 구조적 손상을 유발할 수 있다는 문제점이 대두되었고, 정부에서도 2008년 7월부터 고강도 콘크리트의 내화성능 관리기준을 시행하고 있다. 이에 국내 각 건설사들은50MPa 이상의 고강도 콘크리트에 대하여 폭렬방지 대책을 수립 중에 있다. 본 연구소에서는 신축공사 및 리모델링공사에도 적용이 가능한 고강도 콘크리트 폭렬방지 공법인 PFB (Posco E&C Fire Board) 공법을 개발하여 지속적인 공법 개선에 노력하고 있다. 본 연구는 고강도 콘크리트 폭렬방지 대책으로 개발한 PFB 공법 개발에 대한 일반사항, 현재 건식화 공법 개발 및 당사 PJT적용 현황에 대한 내용을 기술하고자 한다.

• 전자공학회논문지SC
• /
• 제42권6호
• /
• pp.67-76
• /
• 2005

본 논문에서는 근전의수용 소형 근전위 센서를 제안한다. 근전의수용 근전위 센서를 의수 소켓에 내장시키기 위해서는 소형이어야 한다. 제안된 근전위 센서는 피부와 접촉하는 전극과 신호처리를 위한 회로부가 일체화된 형태로 소형화 하였다. 기준 전극은 두 입력전극의 가운데에 나란히 배치되고, 입력전극은 막대형, 기준전극은 막대형과 원형의 두 가지 형상으로 설계하였다. 두 입력전극 사이의 간격은 근섬유의 근전위 신호의 전도속도와 중심주파수를 고려하여 18mm, 20mm, 22mm 의 세 개의 서로 다른 간격을 가진 전극을 제작하였다. 사용된 전극의 재료는 땀이나 습기에 강한 SUS440 금속을 사용하였다. 신호처리 회로부는 대역통과 필터를 갖는 차동 증폭기, 전원노이즈를 제거하기 위한 대역저지 필터, 교류결합증폭기, 절대평균값 회로로 구성되어 있다. 실험에서는 정상인의 전완에서 근전위 신호를 취득하여 주파수 분석하고, 입력전극 사이의 간격과 기준전극의 형상에 따른 출력특성 평가하였다. 본 논문에서는 실험의 결과로부터 두 입력전극간의 거리가 18mm 이면서, 입력전극의 형상과 기준전극의 형상이 모두 막대형인 표면 근전위 센서가 근전의수에 최적임을 보인다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.396-401
• /
• 1995

Epoxy coated reinforcing steels (ECRs) were acquired from ten sources and coatings from each source were initially characterized in terms of defects, thickness, solvent extraction weight loss and hardness. Testing involved exposure in three aqueous solutions at elevated temperature (8$0^{\circ}C$) and in chloride-contaminated concrete slabs under outdoor exposure, It was found that the density and size of coating defects was the promary factor affecting ECR performance. The equivalent circuit analysis using electrochemical impedance spectroscopy (EIS) data indicated that the impedance response for well-performing ECR specimens showed no signs of active degradation at the interface although diffusional processes similar to those noted for poorly performing bars occurred here. Experimental results also indicated a relationship between corrosion behavior and bar source. Weight loss upon solvent extraction correlated with impedance reduction from hot water exposure. Coating defects during most of the tests, especially in high pH solutions containing chloride ions. ECRs with excessive coating defects, either initially present or ones which developed in service, performed poorly in every test category regardless of source. Forms of coating failure were extensive rusting at defects, blistering, wet adhesion loss, cathodic delamination, underfilm corrosion and coating cracks. These occurred sequentially or concurrently, depending on the condition of the ECR and nature of the environment

• 정보저장시스템학회논문집
• /
• 제1권2호
• /
• pp.182-187
• /
• 2005

A large area micro mirror is an optical element that functions as changing an optical path by reflection in integrated optical system. We fabricated the large area silicon mirror by anisotropic etching using MEMS for implementation of integrated optical pickup. In this work, we report the optimum conditions to better fabricate and design, greatly improve mirror surface quality. To obtain mirror surface of $45^{\circ},\;9.74^{\circ}$ off-axis silicon wafer from (100) plane was used in etching condition of $80^{\circ}C$ with 40wt.% KOH solution. After wet etching, polishing process by MR fluid was applied to mirror surface for reduction of roughness. In the next step, after polymer coating on the polished Si wafer, the Si mirror was fabricated by UV curing using a trapezoid bar-type way structure. Finally, we obtained peak to valley roughness about 50 nm in large area of $mm^2$ and it is applicable to optical pickup using blu-ray wavelength as well as infrared wavelength.

• 한국표면공학회지
• /
• 제37권6호
• /
• pp.344-349
• /
• 2004

Emulsions were formed through putting small quantity of nickel electroplating solution into supercritical carbon dioxide, and then electroplating in the $sc-CO_2$ emulsions was conducted. It is an environmental-friendly technology that can solve the treatment of a large quantity of toxic plating wastewater, which is a big problem in the existing wet plating, and also can reduce secondary waste generation fundamentally. Supercritical carbon dioxide emulsions enhanced by ultrasonic horn were formed by non-ionic surfactant and nickel solution. Plating condition within emulsions was set up as 120bar and $55^{\circ}C$ through measurement of electrical conductivity following the pressure change. Experiments were conducted respectively against supercritical carbon dioxide emulsions electroplating and general chemical electroplating, and then their results were compared and analyzed. As the experiment result utilizing emulsions, plating surface was formed very evenly even with a small quantity of electroplating solution, and fine particles were plated compactly without any pinhole or crack due to hydrogenation, which occurs in general electroplating. Used electroplating solution can be reused through recovery process. Therefore, this technology will be able to be applied as new clean technology in electro-plating.