• 한국작물학회지
• /
• 제46권1호
• /
• pp.47-52
• /
• 2001

In order to develop more stable seedling stand method in wet direct rice seeding culture, the effect of making the drainage ditches was studied in both methods of broadcast seeding on floody paddy surface and puddled-soil drill seeding. In a broadcast seeding on floody paddy surface, the ditching after seeding using a tractor or small ditch maker improved the seedling stand, and reduced the floating seedling and herbicide injury by accelerating the drainage. Suitable ditching time was at 2 days after seeding (DAS) for the tractor and at 3 DAS for the ditch maker. In the puddled-soil drill rice seeding culture, the ditching before seeding with a ditch maker at 3 days after draining effectively improved the seedling stand due to quick draining through well formed the seeding furrows. In the puddled-soil drill seeding, seedling stand number showed higher in both ditching plots synchronized with seeding compared with both only draining treatment at 1 DAS without ditching and the flooding plot condition for 6 DAS. And the suitable ditching depth was 6 cm, as considered the ditching status and drained status. These results suggest that the ditching in wet direct rice seeding is an resonable practice for improving the seedling stand through the accelerating drainage of field.

• 한국치위생학회지
• /
• 제15권2호
• /
• pp.189-196
• /
• 2015

Objectives: The purpose of the study is to investigate the relationship between saliva factors and oral hygiene factors in adults. Methods: The subjects were 112 adults from April 1 to June 15, 2014. The selected salivary factors included stimulated/unstimulated salivary flow rates, salivary buffering capacity and pH, and the selected oral hygiene factors included halitosis, wet weight of tongue plaque and oral humidity in dorsum and inferior surface of tongue. Results: There were significant differences in stimulated/unstimulated salivary flow rates, oral malodor and wet weight of tongue plaque. There were significant differences according to age in stimulated/unstimulated salivary flow rates, salivary buffering capacity and wet weight of tongue plaque. Age had a negative correlation with salivary buffering capacity and had a positive correlation with wet weight of tongue plaque. Unstimulated salivary flow rate had a positive correlation with stimulated salivary flow rate, and stimulated salivary flow rate was positively correlated with oral humidity of inferior surface of tongue, salivary buffering capacity and halitosis. Oral humidity of inferior surface of tongue had a positive correlation with salivary buffering rate, pH and halitosis. Salivary buffering capacity was positively correlated with pH, and pH was negatively correlated with halitosis. Conclusions: The salivary factors were linked to the oral hygiene. As there may be great changes in salivary flow rate and oral hygiene due to various factors, the salivary factors seem to be one of the major factors to ensure oral hygiene and to promote oral health.

• 소성∙가공
• /
• 제15권7호
• /
• pp.518-523
• /
• 2006

Wet wire drawing of brass coated steel wire, used for tire reinforcement, is realized with Tungsten Carbide(WC) dies sintered with a cobalt(Co) binder. Dies wear represents an important limitation to the production process and cost savings. Several parameters, such as Co content, WC grain size of tungsten carbide, sintering conditions, and so on, affect on the wear of the drawing die. In this study, the effect of the diamond abrasive particle size on the life of the WC centered dies of the wet wire drawing was investigated. Wet wire drawing experiments were carried out on a wet wire drawing machine. From the experiments, the dies life, dies fracture, wire surface roughness, and wire breaks were investigated. From the results, it was found that the wear of the WC dies increased with the increase in the diamond abrasive particle size.

• 전기학회논문지
• /
• 제60권1호
• /
• pp.214-220
• /
• 2011

This paper studies about the assessment of thermal performance between wet ondol system and electric ondol system. Electrical ondol systems shows faster warm-up time, higher floor surface temperature distribution and lower power consumption than wet ondol system. However, if we provide heat regularly wet ondol system which has more heat capacity shows greater thermal storage than electric ondol system. Therefore, we could conclude that wet ondol system which keeps temperature regularly by the thermal storage show better energy-efficiency in case of using the central heating and district heating system. However, Electrical ondol system shows better efficiency in case of using the space during short time or individual heating systems which needs to heat quickly. The Experiment says that electric ondol system has more benefits on timing to reach the set temperature and energy-efficiency than wet ondol system.

• 한국표면공학회지
• /
• 제39권4호
• /
• pp.166-172
• /
• 2006

Metallized Polyimide films are extensively used as base materials in microelectronics, optical and automotive applications. However it is difficult to deposit metals on those because of their structural stabilities. In this work, polyimide films are modified by a wet process with alkalinemetalhydroxide and additives to introduce functional groups. The surface molecular structures of polyimide are investigated using X-ray photoelectron spectroscopy(XPS), fourier transform infrared reflection spectroscopy(FTIR-ATR), atomic force micro-scopic(AFM). XPS spectra and FTIR spectra show that the surface structure of polyimide is converted into potassium polyamate. AFM image and AFM cross-sectional analyses reveal the increased roughness on the modified surface of polyimide films. As a result, it is shown that the adhesion strength between polyimide surface and electroless nickel layer is increased by the nano-anchoring effect.

• 전기화학회지
• /
• 제11권2호
• /
• pp.100-104
• /
• 2008

Titanium sheet metal substrates used in thin film batteries were wet etched and their surface area was increased in order to increase the discharge capacity and power density of the batteries. To obtain a homogeneous etching pattern, we used a conventional photolithographic process. Homogeneous hemisphere-shaped wells with a diameter of approximately $40\;{\mu}m$ were formed on the surface of the Ti substrate using a photo-etching process with a $20\;{\mu}m{\times}20\;{\mu}m$ square patterned photo mask. All-solid-state thin film cells composed of a Li/Lithium phosphorous oxynitride (Lipon)/$LiCoO_2$ system were fabricated onto the wet etched substrate using a physical vapor deposition method and their performances were compared with those of the cells on a bare substrate. It was found that the discharge capacity of the cells fabricated on wet etched Ti substrate increased by ca. 25% compared to that of the cell fabricated on bare one. High discharge rate was also able to be obtained through the reduction in the internal resistance. However, the cells fabricated on the wet etched substrate exhibited a higher degradation rate with charge-discharge cycling due to the nonuniform step coverage of the thin films, while the cells on the bare substrate demonstrated a good cycling performance.

• 설비공학논문집
• /
• 제27권9호
• /
• pp.475-483
• /
• 2015

In Korea, a typically hot and humid summer means that air-conditioners consume a large quantity of electricity; accordingly, the simultaneous usage of an indirect evaporative cooler may reduce the sensible-heat level and save the amount of electricity that is consumed. In this study, the heat-transfer and pressure-drop characteristics of an indirect evaporative cooler made of paper/plastic film were investigated under both dry and wet conditions; for the purpose of comparison, an indirect evaporative cooler made of plastic film was also tested. Our results show that the indirect evaporative efficiencies under a wet condition are greater than those under a dry condition, and the efficiencies of the paper/plastic sample (109% to 138%) are greater than those (67% to 89%) of the plastic sample; in addition, the wet-surface, indirect evaporative efficiencies of the paper/plastic sample are 32% to 36% greater than those of the plastic sample. Further, the wet-surface pressure drops of the paper/plastic sample are 13% to 23% larger than those of the plastic sample, and this might have been caused by the surface roughness of the samples. A rigorous heat-transfer analysis revealed that, for the plastic sample, 30% to 37% of the wet channels remained dry, whereas all of the channels were wet for the paper/plastic sample.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.171-171
• /
• 2012

In this study, we fabricated the high-brightness AlGaInP-based red light emitting diodes (LED)s using by direct printing technique and inductive coupled plasma (ICP) reactive ion etching (RIE). In general, surface roughening was fabricated by wet etching process to improve the light extraction efficiency of AlGaInP-based red LED. However, a structure of the surface roughening, which was fabricated by wet etching, was tiled cone-shape after wet etching process due to crystal structure of AlGaInP materials, which was used as top-layer of red LED. This tilted cone-shape of surface roughening can improve the light extraction of LED, but it caused a loss of the light extraction efficiency of LED. So, in this study, we fabricated perfectly cone shaped pattern using direct printing and dry etching process to maximize the light extraction efficiency of LED. Both submicron pattern and micron pattern was formed on the surface of red LED to compare the enhancement effect of light extraction efficiency of LEDs according to the diameter of sapphire patterns.After patterning process using direct printing and ICP-RIE proceeded on the red LED, light output was enhanced up to 10 % than that of red LED with wet etched structure. This enhancement of light extraction of red LED was maintained after packaging process. And as a result of analyze of current-voltage characteristic, there is no electrical degradation of LED.

• 대한치위생과학회지
• /
• 제5권1호
• /
• pp.21-27
• /
• 2022

Background: This study was conducted to analyze the time for re-detection of bacteria after surface disinfection using wet wipes, isopropyl alcohol, and benzalkonium chloride antibacterial tissue and provide standards for re-execution of surface disinfection with wet and antibacterial tissues. Methods: Seven laptops were wiped with wet tissue and isopropyl alcohol and benzalkonium chloride antibacterial tissues. Test areas were rubbed with a sterile cotton swab at baseline and after 30, 60, and 120 min. After plating on a tryptic soy agar medium, the number of colonies was counted by culturing at 36.5℃ for 24 h. Results: The average number of bacterial colonies was 5.85 ± 4.33 before isopropyl alcohol wiping and nil after wiping. The average number of bacterial colonies was 12.28 ± 14.67 benzalkonium chloride wiping and nil after wiping. Before wiping with wet wipes, the average number of bacterial colonies on laptop surfaces was 3.42 ± 5.22. Bacteria decreased after wiping with wet wipes but increased again over time. Conclusions: Wet wipes can temporarily reduce bacteria but are unsuitable for removing bacteria.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2004년도 제30회 국제세미나
• /
• pp.19-42
• /
• 2004

Sizing properties in paper are generally developed through the application of both internal and surface sizes. Rosin, wax, and synthetic sizes including ASA, AKD, and stearic anhydride are and have been used to provide wet-end sizing to paper. In many cases, the use of some of these sizes leads to runnability problems that are inherent in the wet-end operation. Variability in furnish, fines, broke, filler, water chemistry, conductivity, and pH control impacts the wet-end operation. Size press chemicals including starch and polymers such as styrene-acrylic, styrene-maleic, and styrene acrylate emulsions are used in conjunction with internal sizes to improve the paper surface for printing and strength properties, porosity, and opacity improvement. This paper will discuss results from a new, proprietary formulation and process that allows application of sizing chemistry more totally at the size press with reduced emphasis on wet end sizing. Runnability issues are thus minimized at the wet-end, chemical usage is more efficient, and significant cost savings can be realized. Case histories will be presented illustrating the advantages of this new application in commercial trials.