• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 1999.03a
• /
• pp.281-287
• /
• 1999

Decision class analysis (DCA) is viewed as a classification problem where a set of input data (situation-specific knowledge) and output data(a topological leveled influence diagram (ID)) is given. Situation-specific knowledge is usually given from a decision maker (DM) with the help of domain expert(s). But it is not easy for the DM to know the situation-specific knowledge of decision problem exactly. This paper presents a methodology for sensitivity analysis of DCA under incomplete information. The purpose of sensitivity analysis in DCA is to identify the effects of incomplete situation-specific frames whose uncertainty affects the importance of each variable in the resulting model. For such a purpose, our suggested methodology consists of two procedures: generative procedure and adaptive procedure. An interactive procedure is also suggested based the sensitivity analysis to build a well-formed ID. These procedures are formally explained and illustrated with a raw material purchasing problem.

• Journal of Welding and Joining
• /
• v.20 no.2
• /
• pp.77-81
• /
• 2002

Many kinds of Pb-free solder have been investigated because of the environmental concerns. Sn-Ag-Cu system is well blown as most competitive Pb-free solder. However, since Sn-Ag-Cu system has relatively high melting point compared to Sn-Pb eutectic, it may a limitation, the some application. In this study, Bi and In contained solder of $Sn_3Ag_8Bi_5In$ which has relatively lower melting point, $188~204^{\circ}C$, was investigated. $Sn_3Ag_8Bi_5In$ solder ball of $500\mu\textrm{m}$ diameter was set on the Ni/Cu/Cr-UBM and reflow soldered in the range of $220~240^{\circ}C$ for 5~15s. The maximum shear strength of the solder ball was around 170mN by reflowing at $240^{\circ}C$ for 10s. Intermetallic compound formed on the UBM of Si-wafer was analysed by SEM(scanning electron microscope) and XRD(X-ray diffractometer).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1130-1131
• /
• 2006

Here we report the effect of photo-spacer and polymer wall on the mechanical stability of the polymer-stabilized ferroelectric liquid crystal (PSFLC) system. A better bending tolerance of the PSFLC cell was obtained when the polymer wall was formed parallel to the rubbing direction. In addition, the effect of the distance between photo-spacer columns as well as that of the distance between polymer wall columns on the mechanical stability of the liquid crystal was examined.

• Journal of the Korean Ceramic Society
• /
• v.34 no.5
• /
• pp.528-534
• /
• 1997

There have been many studies on the preparation of slip, forming and drying in the slip casting process. However, is has not been yet on the rheological properties of consolidated body which largely affect on the workability. It was investugated that the rheological properties of the consolidated bodies formed by slip casting in the form of cakes from well dispersed(slip C) and weakly agglomerated slip(slip B) in the clay and clay-fly ash systems. The state of dispersion of slip was found to affected the critical moisture content which was largely affected by the pore and moisture distribution of the consolidated body. The cake C show lower critical moisture content than cake B in the clay system. However, the cake B gives lower critical moisture content than cake C in the clay-fly ash system.

• Journal of the Optical Society of Korea
• /
• v.3 no.1
• /
• pp.15-19
• /
• 1999

The formation of spontaneous transverse optical patterns was investigated in a single feedback mirror system using nematic liquid crystals as nonlinear optical media. By varying the size of an input beam and the feedback distance, we obtained various interesting transverse optical patterns as well as the hexagonal pattern which are predicted theoretically assuming plane wave input. We can explain theoretically these characteristics of various pattern by introducing a ratio of the beam half width and spatial wavelength of the patterns. We have observed that as this ratio increased, the number of spot constituting the patterns also increased. Finally the patte군 evolved into the sucessive hexagon in the transverse plane.

• Journal of the Korean Society of Visualization
• /
• v.8 no.1
• /
• pp.25-30
• /
• 2010

The flow characteristics under recirculation cool vent mode is numerically studied using commercial fluid dynamic code(CFX). For the reliable analysis, real vehicle and human FE model is employed in grid generation process. The geometrical location and shape of panel vent, and exhaust vent is set as that of real vehicle model. The flowrate of the working fluid is determined as 330CMH which is equivalent to 70 percent of maximum capacity of HVAC system. The high velocity regions are formed around 4 each panel vent. Because of the non-symmetrically located exhaust, non-uniform flow and partial backflow near the door trim is observed. Streaklines start from each panel vent show the flow pattern of the airflow in the passenger's compartment very well.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.214-214
• /
• 2014

Computational analysis of aqueous solution stability of Fe-Cr-Ni system to find an electroplating condition of Fe-Cr-Ni layer. Aqueous sulfate solution with iron, chromium and nickel ions was selected by using a numerical S/W with which aqueous solution stability was analyzed. Several possible conditions to perform electro-forming of Fe-Cr-Ni were selected with thermo-dynamical data. The Fe-Cr-Ni system was electro-formed which composition and microstructure of the electroplated Fe-Cr-Ni significantly depended on the solution temperature and electro-potential. The final composition of Fe-3%Cr-48%Ni with less than $30{\mu}m$ thick was well electroplated.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.215-215
• /
• 2014

Composites layer of Al-Cr-Ni-O system was prepared on a steel plate by hydro-thermal process at $700^{\circ}C$ for 12 hours, which phase identification and thermal conductivity were determined. The composites layer consisted of aluminum nitride, alumina, chromium carbide and aluminium, which density was $3.7kg/m^3$. The thermal conductivity of the coating layer determined by thermal data acquisition system was about 98.0 W/m/ which depended on the AlN content. Numerical modelling of the heat transfer behavior of the coating layer was well agreement with the empirical data.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.1 no.1
• /
• pp.9-21
• /
• 2020

Ecological communities adapt the concept of informatics in the late 20 century and develop rapidly in the early 21 century to form Ecoinformatics as the new approach of ecological research. The new approach takes into account the data-intensive nature of ecology, the precious information content of ecological data, and the growing capacity of computational technology to leverage complex data as well as the critical need for informing sustainable management of complex ecosystems. It comprehends techniques for data management, data analysis, synthesis, and forecasting on ecological research. The present paper attempts to review the development history, studies and application cases of ecoinformatics in ecological research especially on Long Term Ecological Research (LTER). From the applications show that the ecoinformatics approach and management system have formed a new paradigm in ecological research.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.6
• /
• pp.339-345
• /
• 2010

Fenofibrate has been used for many years to lower cholesterol levels and its pharmacokinetic profile is well understood. However, due to its low solubility in water, it has low bioavailability after oral administration. In order to improve the dissolution rate, fenofibrate was formulated into a self-microemulsifying drug delivery systems (SMEDDS). We used pseudo-ternary phase diagrams to evaluate the area of microemulsification, and an in vitro dissolution test was used to investigate the dissolution rate of fenofibrate. The optimized formulation for in vitro dissolution assessment consisted of Lauroglycol FCC (60%), Solutol HS 15 (27%), and Transcutol-P (13%). The mean droplet size of the oil phase in the microemulsion formed from the SMEDDS was about 130 nm. The dissolution rate of fenofibrate from SMEDDS was significantly higher than that of the reference tablet. Our studies suggested that the fenofibrate containing SMEDDS composition can effectively increase the solubility and oral bioavailability of poorly water-soluble drugs.