• Journal of Korea Soil Environment Society
• /
• v.2 no.1
• /
• pp.51-61
• /
• 1997

The objective of this study is to evaluate the feasibility of Pumping-and-Treatment system (PTS) for remediation of the saturated zones contaminated with NAPLs. A simulation is carried out for the removal of DNAPLs (denser-than-water non-aqueous phase liquids) and LNAPLS (lighter-than-water non-aqueous phase liquids) distributing at and below the water table. In the study, LNAPL and DNAPL are assumed to be n-hexane and 1,1-dichloroacetone, respectively. The model system studied consists of four heterogeneous soil layers with different permeabilities. Groundwater flows through the bottom layer and a pumping well is located under the initial water table. The time-driven deformation of the water table and removal efficiency of contaminants are estimated after vacuum application to the inlet of the well. In the calculation, FVM (Finite Volumetric Method) with SIMPLEC algorithm is applied. Results show that removal efficiencies of both DNAPL and LNAPL are negligible for the first 5 days after the PTS operation. However, when the cone-shape water table is formed around the inlet of the pumping well, the rapid removal rate is obtained since NAPLs migrate rapidly through the curvature of the water table. The removal efficiency of DNAPL is estimated to be higher than that of LNAPL due to the gravity. The results also show that the fluctuation or cone-shaped depression of the water table enhances the removal efficiency of NAPLs in saturated zones. The simulation results could provide a basis of the PTS design for the removal of NAPLs in saturated zones.

• KSBB Journal
• /
• v.16 no.6
• /
• pp.632-637
• /
• 2001

The cells obtained from diesel contaminated site were tested for diesel degradation by culturing them on the culture medium that contained diesel as the only carbon source. Two strains that grew well in the culture media were separated: one formed white colony and another strain formed yellow colony. When they were cultured together, much higher diesel degradation was obtained compares to that of individual cell culture. Mixed culture of white and yellow colony forming strains grew well with 1%(v/v) diesel and the addition of growth nutrients increased the diesel degradation. Additional nitrogen source was efficient for higher diesel degradation (over 90%) when it was compared with that without nitrogen source. When mixed culture of white and yellow colony forming cells were applied to the soil column system contaminated by diesel, 30 mL/min of air flow rate was found to be sufficient to degrade diesel oil. The diesel degradation did not increase noticeably at higher flow rate. The addition of nitrogen source resulted in the increase in diesel degradability.

• Human Ecology Research
• /
• v.56 no.3
• /
• pp.247-262
• /
• 2018

This study investigates the process of PCK formation for 2017 novice teachers in Busan. This study was conducted parallel to quantitative research using the H-PCK measurement tool as well as qualitative research methods through an open questionnaire and after-interview. Consequently, the H-PCK level of novice teachers was 3.51. The knowledge of perspective on home economics education (KP) was 3.87, knowledge of home economics curriculum (KC) was 3.37 and the knowledge of home economics instructional strategies (KI) was 3.39. Study participants reported that curriculum knowledge, curriculum content knowledge, and teaching strategy knowledge were formed through preparation for appointment; however, it was not possible to judge if PCK was formed for the restructuring ability or the reconstruction ability. Knowledge related to curriculum content was learned through teacher training, internet teacher community, and internet information materials. Knowledge of teaching strategies was learned through 1-2 teaching consulting or peer scholarship. It is necessary to revise the university curriculum (such as expansion of curriculum education, expansion of experience in teaching practice, and actual case study) order to form PCK. Second, it should be developed and operated various training programs for the formation of home economics education curriculum knowledge. Third, it is necessary to organize a nationwide system to support the mentor. In the future, it is necessary to study PCK analysis for each unit and topic as well as to explain methods that can be provided to field teachers.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.6
• /
• pp.860-866
• /
• 2009

It is very important to choose optimal material having good corrosion resistance and capabilities for the part materials such as the automotive exhaust system under a hot salt corrosion atmosphere. Generally, two types of corrosion come into the automotive exhaust system. One is 'Condensate Corrosion', which is occurred by exhaust gas condensate formed at the inner surface of exhaust system heated up during driving, which results in the acid condensate pitting. The other is 'High Temperature Salt Corrosion' occurring from the interaction between the chloride ion coming from salt at the seaside district or snow salt and the outer surface of exhaust system. By the corrosion attack, the main muffler is firstly damaged and the life cycle of an automobile is significantly decreased. It has been investigated that the hot salt corrosion properties of a STS 409L and 436L ferritic stainless steels which are well-known for the materials of the automotive exhaust system. In addition, the corrosion properties of hot dip aluminum coated STS 409L have been compared with uncoated steels. Aluminum coated STS 409L showed a superior corrosion resistance than uncoated STS 409L, and futhermore showed a better corrosion resistance than a STS 436L, which is an expensive ferritic stainless steel having a excellent corrosion resistance caused from more chromium content of an alloying element.

• Journal of Power System Engineering
• /
• v.10 no.4
• /
• pp.50-55
• /
• 2006

An efficient cooling system for a piston of an automotive engine is very important. Therefore a large capacity gasoline engine or diesel engine has adopted the direct injection cooling system to increase its cooling efficiency. In this direct cooling system, an cooling oil is injected to a piston directly using an oil jet and this cooling oil flows through an oil gallery inside the piston. Flow rate and injection accuracy of this cooling oil are very important because these are main factors that have influence on its efficiency. The purpose of this study is to understand the changes of flow characteristics with various curvatures and diameters of an outlet nozzle and to check whether engine oil enters into the oil gallery well or not. From this study, we found that secondary flow was formed in a curved part of jet due to centrifugal force and irregular flow pattern appeared at the jet outlet. This pattern has influence on flow characteristics of engine oil entering the gallery. These simulation results have a good agreement with experiments.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.29 no.2 s.43
• /
• pp.181-191
• /
• 2003

This study described about method that form liquid crystal gel (LCG) by main ingredient with hydrogenated lechin (HL) in OW emulsion system. Result of stability test is as following with most suitable LCG's composition. Composition of LCG is as following. To form liquid crystal, an emulsifier used $4.0\;wt\%$ of cetostearyl alcohol (CA) by $4.0\;wt\%$ of HL as a booster, Moisturizers contained $2\;wt\%$ of glycerin and $3.0\;wt\%$ of 1.3-butylene glycol (1,3-BG). Suitable emollients used $3.0\;wt\%$ of cyclomethicone, $3.0\;wt\%$ of isononyl isononanoate (ININ), $3.0\;wt\%$ of cerpric/carprylic triglycerides (CCTG), $3.0\;wt\%$ of macademia nut oil (MNO) in liquid crystal gel formation. On optimum conditions of LCG formation, the pHs were formed all well under acidity or alkalinity conditions. Considering safety of skin, PH was the most suitable $\pm61.0$ ranges. The stable hardness of LCG formation appeared best in $32\;dyne/cm^2.$ Particle of LCG is forming size of $1{\~}20\;{\mu}m$ um range, and confirmed that the most excellent LCG is formed in $1{\~}6\;{\mu}m$ range. According to result that observe shape of LCG with optical or polarization microscope, LCG could was formed, and confirmed that is forming multi-layer lamellar type structure around the LCG. Moisturizing effect measured clinical test about 20 volunteers. As a result, moisturizing effect of LCG compares to placebo cream was increased $30.6\%$. This could predicted that polyol group is appeared the actual state because is adsorbed much to round liquid crystal droplets to multi-lamellar layer's hydrophilic group. It could predicted that polyol group is vast quantity present phase that appear mixed because is adsorbed to round liquid crystal to multi-lamellar layer's hydrophilic group. This LCG formation theory may contribute greatly in cosmetics and pharmacy industry development.

• Journal of the Optical Society of Korea
• /
• v.17 no.2
• /
• pp.142-147
• /
• 2013

In order to deduce the difficulty of fixing the Ritchey-Chretien (R-C) dual reflective optical system and enhance the stability of the secondary mirror, a compact integral structure is presented here composed of two transmitting and two reflective aspheric surfaces. The four surfaces were manufactured from a single germanium lens and integrated together. The two reflective surfaces formed by coating the inner reflecting films were assembled in one lens. It makes the installation of the two mirrors easier and the structure of the secondary mirror more stable. A design of mid-wave infrared (MWIR) compact imaging system is presented with a spectral range chosen as $3.7-4.8{\mu}m$. The effective focal length is f=90 mm. The field of view (FOV) for the lens is $4.88^{\circ}$. It has good imaging capability with Modulation Transfer Function (MTF) of all field of view more than 0.55 close to the diffraction limitation. Outdoor experiments were carried out and it is shown that the integral catadioptric optical system performs well on imaging.

• Korean System Dynamics Review
• /
• v.16 no.2
• /
• pp.5-32
• /
• 2015

Last year, a disastrous accident happened on the sea. Car ferry Se-wol which was on its way from In-cheon to Je-ju sank in the middle of the western sea. 304 passengers were drowned at the sea in the accident. There were no passengers who were waiting on board ship rescued in the accident. This study is to review the pattern of decision making in the middle of saving a life, right after Se-wol was about to sink. The starting point of this study is decision making on the rescue by rescue corps with no expert knowledge at the initial stage. When it comes to saving victims, there was no expert on rescue on the sea. Failure in rescue at Se-wol disaster lets us find a vicious circle of positive feedback loop. Experts with no experience act like well-qualified persons. Unqualified persons(leaders) have no expertise. Those who pretend to be expert occupy the important post in the hierarchy. It means we could not accumulate expertise of know-how in rescue division. That's why a vicious circle of positive feedback is formed in areas of disasters. It is necessary to train experts in Government Organizations to weaken the vicious circle of positive feedback.

• The KIPS Transactions:PartD
• /
• v.11D no.4
• /
• pp.959-966
• /
• 2004

This paper describes a design and implementation of the tree-based document editing system for XML application, available at the structure-oriented environment. This system converts DTD to ASTD( Syntax Tree Definition) to support syntax-directed editing for valid document, considers the extensibility to add new tools and supports multiple entry parser for real-time document validation. It is expected that this paper contributes related XML application document editing system development model.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.12
• /
• pp.1175-1183
• /
• 2009

In photovoltaic(PV) generator systems, DC-DC converters are significantly considered for control system performance in power quality point of view. This paper presents a novel adaptive control method for DC-DC converters applied in PV generator systems. First, we derive a state-space average model of the converter system and then propose a reset control methodology to enhance transient response performance for time-varying PV systems. For estimating parameters of a reset control, a gradient descent optimization is utilized and an adjustment rule of them are derived respectively. An objective of the optimization is that characteristic equation of an augmented system model which is formed with an converter system model and an reset control is to trace a predefined polynomial given as a reference characteristic model. Next, we accomplish stability analysis by means of a well-known Lyapunov theory for nonlinear converter systems including time-varying voltage excitation from a PV generator. Numerical simulation demonstrates reliability of our control methodology and its superiority by comparison to a traditional control strategy.