• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.35-36
• /
• 2006

In Nd:YAG laser welding, evaluation methods of welding flaw are various. But, the method due to fume shape is difficult to classification of welding flaw. The Nd:YAG laser process is known to have high speed and deep penetration capability to become one of the most advanced welding technologies. At the present time, some methods are studied for measurement of fume shape by using high-speed camera and photo diode. This paper describes the machining characteristics of SM45C carbon steel welding by use of an Nd:YAG laser. In spite of its good mechanical characteristics, SM45C carbon steel has a high carbon contents and suffers a limitation in the industrial application due to the poor welding properties. In this study, fume shape was measured by infrared thermal camera that is non-contact/non-destructive thermal measurement equipment through change of laser generating power, speed, focus. Weld was performed on bead-on method. Measurement results are compared as two equipments. Here, two results are composed of measurement results of fume quantities due to fume shape by infrared thermal camera and inspection results of weld bead include weld flaws by ultrasonic inspector.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 춘계학술발표대회 개요집
• /
• pp.136-138
• /
• 2002

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2001년도 춘계학술발표대회 논문개요집
• /
• pp.75-77
• /
• 2001

• 한국산학기술학회논문지
• /
• 제17권1호
• /
• pp.453-458
• /
• 2016

머신비전은 고속화된 자동화 생산 시스템의 품질 검사 방법으로 널리 활용되어 왔다. 본 연구에서는 멀티카메라를 사용하여 PC와 PLC 간 제어를 통해 용접부위의 치수를 실시간으로 측정하여 검사하는 머신비전 시스템을 개발하였다. 제안한 검사시스템은 맞대기 용접부위의 길이와 폭을 측정하여 용접부의 치수 균일성을 검사하도록 설계하였다. 광학계 및 물류는 병렬제어를 위해 PC와 PLC 간 TCP/IP 멀티쓰레딩 통신기법을 적용하였다. 금속재료의 반사 특성을 고려하여 용접비드의 형태나 용접시 발생하는 그을음에도 균일하게 검사부위의 영상획득이 가능한 동축조명계를 적용하였고, 검사 알고리즘은 OpenCV 라이브러리를 사용하여 용접치수검사에 맞게 개발하였다. 제작한 시스템을 실제 전자부품의 용접 자동화 라인에 설치하여 시스템의 작동오류 및 검사 성능을 검증한 결과, 요구되는 기능 및 검사 성능을 모두 성공적으로 수행하였다.

• 한국기계가공학회지
• /
• 제10권6호
• /
• pp.128-133
• /
• 2011

In this study, the steel material for shipbuilding(LR-A class) was used, and FCAW was taken advantage of 3G attitude and they are welded by different welding ways. As a result of analyzing wave with welding monitoring system, the stable values are obtained which are the first floor(electronic current 164~182 A, voltage 24 V), the second floor(electronic current 174~190 A, voltage 22~25 V), the third floor(electronic current 158~188 A, voltage 22~25 V), and fourth floor(electronic current 172~184 A, voltage 22~25 V), at this time, the stable wave standard deviation and changing coefficient could be obtained. When the welding testing through nondestructive inspection was analyzed know defect of welding, there was no defect of welding in A, D, E, but some porosities in B, and slag conclusion near the surface in C, because the length of arc was not accurate, and the electronic current and voltage was not stable. After observing the change of heat affect zone through micro testing, each organization of floor formed as Grain Refinement, so welding part was fine, the distance of heat affect zone is getting wider up to change the values of the electronic current and voltage. As a result of degree of hardness testing, the hardness orders were the heat affect zone(HAZ), Welding Zone(WZ), and Base Metal(BM). When the distribution of degree of hardness is observed. B is the highest degree of hardness The reason why heat effect zone is higher than welding zone and base metal, welding zone is boiled over melting point($1539^{\circ}C$) and it starts to melt after the result of analysis through metal microscope, so we can know that delicate tissue is created at the welding zone. Therefore, in order to get the optimal conditions of the welding, the proper current of the welding and voltage is needed. Furthermore the precise work of welding is required.

• 한국산학기술학회논문지
• /
• 제15권10호
• /
• pp.6282-6288
• /
• 2014

본 논문은 용접 산업현장에서 많이 사용 되는 $CO_2$ 용접에서는 차량내부 및 탱크내부 용접에서 제어 패널을 볼 수 없는 곳, 작업장이 먼 곳 등에서 용접사가 용접을 하면서 용접조건에 맞는 전류와 전압을 조절할 수가 없고, 전류와 전압을 조절하기 위해 용접을 중단하고 잦은 이동으로 용접 구조물의 순간적인 냉각에 의해 용접결함이 발생된다. 본 연구에서는 기존의 $CO_2$ 용접기 3종류를 각각 사용하여 원격제어 토치의 용접에 대해 SS400 용접구조용 압연강재를 사용하여 원격제어 토치와 기존 $CO_2$ 용접 토치를 V형 맞대기 수직자세로 용접실험을 실시하고 용접 부의 표면비드 상태의 형상을 육안검사 관찰하고 또한 이를 침투탐상검사 및 굽힘 시험을 통해 용접부의 외관품질에 대하여 중점적으로 수행하여 용접결함 감소 및 기존 상용용접기에 교체사용에 대한 성능 및 호환성여부에 미치는 영향에 대해 평가하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.247-248
• /
• 2007

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년 추계학술발표대회 개요집
• /
• pp.283-285
• /
• 2006

Non Destructive Examination for welds is one of the most important processes to ensure the integrity of facilities of Nuclear power plants. An automated ultrasonic testing program is developed for welding inspection. A test block with side EDM notch is inspected with this program. This paper shows that the developed automated ultrasonic testing program is quite effective.

• 한국공작기계학회논문집
• /
• 제15권3호
• /
• pp.39-44
• /
• 2006

In this study, we nodestructive test based on ultrasonic test as inspection method and compared backpropagation neural network(BPNN) with probabilistic neural network(PNN) as pattern recognition algorithm of welding flasw. For this purpose, variables are applied the same to two algorithms. Where, feature variables are zooming flaw signals of reflected whole signals from welding flaws in time domain. Through this process, we confirmed advantages/disadvantages of two algorithms and identified application methods of two algorithms.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 춘계학술발표대회 개요집
• /
• pp.102-104
• /
• 2003

Laser weldability of aluminized steels of 0.8mm thick has been investigated. Test materials were cut from the commercial steels that were produced at the Coating Mill of POCOS. Test coupons for welding were prepared by using a conventional shearing machine and no additional edge treatment was peformed. Nd:YAG laser welding system was mainly applied to make weld specimens. Test results revealed that almost no spattering was observed even though the welding was peformed with no overlap joint clearance. Bead quality of aluminized steel laser weld was smooth and stable. According to x-ray inspection results, it was proved that the laser welds of aluminized steels were metallurgically defect free.