• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.177-179
• /
• 2005

In an attempt to optimize friction spot joining Process of Al alloys for automobiles, joining parameters such as tool rotating seed, plunging depth, and joining time on the joints properties were investigated. A wide range of joining conditions could be applied to join Al alloys for automobile without defects in the weld zone except for certain welding conditions with a lower heat input. for sound joints without defects, tensile shear strength of joints was higher than acceptable criteria of tensile shear strength of resistance spot welded joints for aluminum.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.479-484
• /
• 2004

For the rational design of welded joint, it is needed to assess repeatedly the fatigue life of the joint with various dimensions and welding conditions. In this paper, an automation of repeated process of fatigue life assessment for welded cruciform joint was studied. The process is related to stress analysis in vicinity of weld-toe and fatigue life assessment based on analyzed stress distribution. With the change of design condition including dimensions and/or welding heat input, the above two works have to be performed. Using the commercial tool for system integration, ModelCenter, an automation of the repeated process for welded cruciform joint based on 2D modeling was achieved. In this automation system, data exchanges between programs regardless of commercial or in-house one work well, and parametric studies for optimal design can be performed.

• Nuclear Engineering and Technology
• /
• 제53권11호
• /
• pp.3837-3851
• /
• 2021

To investigate how the fabrication and repair of socket welded joints could be used to enhance fatigue resistance under vibration condition, experimental test data of installation conditions that potentially influence fatigue strength were analyzed with the S-N curve. It was found that the decreasing fatigue strength of stainless steel socket welded joints was attributed to the effect of high heat input of welding process. The effect of welding method, slip-on gap and radial-gap conditions on fatigue strength was insignificant. The test data of repair technique application, 2 × 1 leg length and of socket weld overlay, clearly showed higher fatigue strength but there was a limitation for higher stress region because of the weld toe crack.

• Journal of Welding and Joining
• /
• 제29권3호
• /
• pp.51-57
• /
• 2011

Bead shape control with gas force process has been developed to overcome the concave back bead in pipe orbital welding. However, It is impossible to make a convex back bead using the existing gas nozzle, because it has high gas-consuming and low gas force. The purpose of this paper, to develop optimum shape of nozzle which to reduce the consumption of gas, maximizing the shield gas force with low cost and high productivity coincide the Green welding. In this paper venturi-type nozzle was designed by using the Venturi meter and compared velocity, pressure, arc shape in the flat position with existing CP-nozzle. As a result, Venturi-type nozzle's maximum velocity and pressure was improved at the same flow rate. Also heat input was increased by the arc contraction in the flat position.

• Journal of Welding and Joining
• /
• 제29권2호
• /
• pp.72-79
• /
• 2011

The scope of this investigation is to evaluate the effect of joining parameters on the microstructural features and mechanical properties of dissimilar aluminum alloys, 1mm-thickness fixing AA6K31 at the top position and fixing AA5J32 at the bottom position. The friction stir lap welds were studied under various welding conditions, rotation speed of 1000, 1250, 1500rpm and welding speed of 100, 300, 500, 700mm/min, respectively. Mechanical test has been investigated in terms of tensile shear test and hardness test. The results showed that three type nugget shapes such as onion ring, zigzag type, hooking with the void, have been observed with revolutionary pitch. All welding conditions fractured at the HAZ of top plate, A6K31 and also the strength compare with base metal of lap joints were low efficiency, 52~63%. The thickness of fractured position was decreased with the lower heat input conditions. The relationships were excellent due to linear between the effective thickness of fractured position and peak load. The fractured position was the interface between joint area and not joint area. Also the strength efficiency compared with base metal was lower than decreasing rate of thickness because the hardness was decreased at fractured position due to softened material.

• 대한조선학회논문집
• /
• 제47권6호
• /
• pp.821-830
• /
• 2010

Deck plates and hatch coming of large container carrier and offshore structures are joined by ultra-thick plates whose thickness is more than 60mm. Traditionally FCAW has been used to join the thick plates in butt joint. However, FCAW has been replaced with EGW since the welding efficiency of EGW is higher than that of FCAW. Tandem EGW using two electrodes has been applied to vertical position welding by several shipyards. EGW requires one or two layers of bead whereas FCAW requires more than 20 layers of weld bead in thick welding. However, high welding residual stresses are generated by EGW since it uses higher heat input than FCAW. In the present study, a finite element model is suggested to predict the residual stresses induced by the tandem EGW. Butt specimen of EH40 TMCP shipbuilding steel plates vertical welding was modeled by a three-dimensional model. Residual stresses were measured by X-ray diffraction method and to verify the numerical result. The results show a good agreement with experimental result.

• 대한토목학회논문집
• /
• 제4권2호
• /
• pp.133-142
• /
• 1984

횡방향(橫方向)과 종방향(縱方向), 대입열용접(大入熱鎔接)과 소입열용접(小入熱鎔接), 모재(母材)와 같은 강도(强度)의 용접재료(鎔接材料) 사용(使用)과 모재(母材)보다 낮은 강도(强度)의 용접재료(鎔接材料) 사용(使用) 등으로 서로 비교되는 용접(鎔接)이음의 소인장시험편(小引張試驗片)을 만들어서 피로시험(疲勞試驗)을 행하여 피로구열(疲勞龜裂) 진전속도(進展速度) ${\frac{da}{dN}}$와 구열선단(龜裂先端) 부근의 응력확대계수(應力擴大係數)의 변동범위(變動範圍) ${\Delta}K$와의 관계곡선(關係曲線)을 그려서 비교시험간(比較試驗間)의 모재(母材), 열영향부(熱影響部) 및 용착금속부(鎔着金屬部)로 구분, 혹은 지금까지의 연구자료(硏究資料) 등과 비교검토하였다. 이 결과, 다음과 같은 현상들을 알 수 있었다. 기본적(基本的)으로, 용접방향(鎔接方向), 용접입열량(鎔接入熱量), 용접재료(鎔接材料)의 강도(强度), 혹은 모재(母材), 열영향부(熱影響部) 및 용착금속부(鎔着金屬部)의 구분 등에 따라 ${\frac{da}{dN}}-{\Delta}K$관계에 큰 차이가 없었다. 다만, 첫째, 소재(素材)에 대한 경우에 비해 대개 처음은 같은 ${\Delta}K$에서 ${\frac{da}{dN}}$가 상당히 늦다가 점차 증가하여 중간쯤에서 같아진 후 끝 부분에서 같은 ${\Delta}K$에서${\frac{da}{dN}}$가 다소 빨라짐을 알 수 있었다. 둘째, 열영향부(熱影響部)에서 용접금속부(鎔接金屬部)로 진전(進展)하면서 ${\frac{da}{dN}}$가 다소 늦어지는 것을 알 수 있었다. 셋째, 용접방향(鎔接方向)과 구열방향(龜裂方向)이 평행인 경우가 직각인 경우에 비해, 모재(母材)와 같은 용접재료(鎔接材料)를 쓴 경우 소입열용접(小入熱鎔接)인 경우가 대입열용접(大入熱鎔接)인 경우에 비해, 모재(母材)보다 낮은 용접재료(鎔接材料)를 쓴 경우 대입열용접(大入熱鎔接)인 경우가 소입열용접(小入熱鎔接)인 경우에 비해, 대입열(大入熱)의 평행용접(鎔接)의 경우를 제외한 모든 용접(鎔接)에서 모재(母材)와 같은 강도(强度)의 용접재료(鎔接材料)를 쓴 경우가 모재(母材)보다 낮은 강도(强度)의 용접재료(鎔接材料)를 쓴 경우에 비해 ${\Delta}K$가 낮은 시기(時期)에 일찍 저속(低速)으로 구열(龜裂)이 시작되어 ${\Delta}K$의 큰 증가없이 ${\frac{da}{dN}}$가 빠르게 증가한 다음 다른 경우와 같은 성상(性狀)으로 진전됨을 알 수 있었다. 넷째, 소입열용접(小入熱鎔接)의 경우 평행용접(鎔接)이 직각용접(鎔接)에 비해, 소입열용접(小入熱鎔接)이 대입열용접(大入熱鎔接)에 비해 같은 ${\Delta}K$에서 ${\frac{da}{dN}}$가 다소 늦은 것을 알 수 있었다.

• Journal of Welding and Joining
• /
• 제16권6호
• /
• pp.44-51
• /
• 1998

It is well known that the fine bainitic microstructure obtained by TMCP(thermo-mechanical control process) secures the high toughness of base metal. Besides, TMCP steel is very suitable for high heat input in welding as it has low carbon equivalent. In HAZ, however, the accelerated cooling effect imparted on the matrix by the weld thermal cycles is relieved and thus the weldment of TMCP steel has softening zone which shows low fracture toughness compared with base metal. Therefore, PHWT of weldment is carried out to improve the fracture toughness in weldment of TMCP steel which has softening zone. In this study, the effects of PWHT on the weldment of AH36-TMCP steel are investigated by the small punch (SP) test. From the several results such as SP energy and displacement at room temperature, the behavior of transition curves, the fracture strength at -196$^{\circ}C$, distribution of (DBTT)sp and (DBTT)sp, the PWHT condition of A.C. after 85$0^{\circ}C$-1 sec W.C. was suitable condition for recovering a softening zone of HAZ as welded.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.217-221
• /
• 2002

In the coarse grain HAZ adjacent to the fusion line, most of the TiN particles in conventional Ti added steel are dissolved and austenite grain growth is easily occupied during welding process. To avoid this difficulty, thermal stability of TiN particle is improved by increasing the nitrogen content in steel. In this study, the effect of high nitrogen TiN particle on preventing austenite grain growth in HAZ was investigated. Increased thermal stability of TiN particle is helpful for preventing the austenite grain growth by pinning effect. High nitrogen TiN particle in simulated HAZ were not dissolved even at high temperature such as 1400 C and prevented the austenite grain growth in simulated HAZ. Owing to small austenite grain size in HAZ the width of coarse grain HAZ in high nitrogen TiN steel was decreased to 1/10 of conventional TiN steel. Even high heat input welding, the microstructure of coarse grain HAZ consisted of fine polygonal ferrite and pearlite and toughness of coarse grain HAZ was significantly improved.

• Journal of Welding and Joining
• /
• 제10권1호
• /
• pp.12-19
• /
• 1992

용접능률의 향상을 위한 대입열용접법의 적용은 과도한 입열량으로 인하여 용접부의 인성이 저 하한다는 점에서 그 적용에 주의를 요한다. 본 보에서는 대입열용접시 열영향부의 인성 저하의 원인과 그 대책을 강재의 측면에서 검토하였다. 고장력강을 용접하면 입열량이 증가함에 따라 오스테나이트 결정립이 조대화되고 상부 베이나이트와 도상 마르텐사이트가 생성되어 인성이 저하한다. 그 대책으로서는 용접 열싸이클과정중 안정한 질화물, 산화물등을 모재에 미세분산시켜 오스테나이트 결정립 성장을 억제하고, 페라이트, 펄라이트 변태를 촉진시킨다. 이러한 석출물의 형성을 위해서는 주로 Ti, Ca, REM, B등의 합금원소가 이용된다. 소입성이 높은 주질고장력 강에서는 석출물의 분산에 의한 페라이트의 변태 촉진 보다는 Mn, Ni, Cr, Mo, V등의 합금원 소를 첨가하여 소입성을 높여 인성이 우수한 하부 베이나이트 조직을 형성하든가, 탄소량을 저 감시켜 도상 마르텐사이트의 생성을 억제하므로서 인성을 확보한다. 현재 국내에서 제조되고 있는 대입열용접용강중 인장강도 50kgf/mm$^{2}$급강은 기본적으로 용접부 인성이 우수한 TMCP법으로 제조되며, Ti등을 첨가하여 석출물의 효과를 이용하고 N을 억제하여 기지의 인 성을 향상시키는 등의 방법을 병용하고 있다. 인장강도 60kgf/mm$^{2}$ 급강은 조질처리에 의하여 제조되며, 50kgf/mm$^{2}$급강과 같이 Ti, B등의 첨가에 의한 석출물의 효과를 이용 하고 있다.