• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.4
• /
• pp.472-481
• /
• 2015

Objectives: Welding is a major task in shipbuilding yards that generates welding fumes. A significant amount of welding in shipbuilding yards is done on steel. Inevitably, manganese is present in the base metals being joined and the filler wire being used and, consequently, in the fumes to which workers are exposed. The objective of this work was to characterize manganese exposure associated with work area, total and particle size-selective mass concentration, and compare the mass concentrations obtained using a three-piece cassette sampler, size-selective impactor sampler and blood manganese concentrations. Materials: All samples were collected from the main work areas at one shipbuilding yard. We used a three piece cassette sampler and the eight stage cascade impactor sampler for the airborne manganese mass concentration of total and all size fractions, respectively. In addition, we used the results of health examination of workers sampled for airborne manganese. Results: The oder of high concentration of airborne manganese in shipbuilding processes was as follows; block assembly, block erection, outfitting installation, steel cutting, and outfitting preparation. The percentages of samples that exceeded the OES of the ministry of employment and labor by the cassette sampling method was 12.5%, however 59.1% of sampled workers by the impactor sampling method exceeded the TLV of the ACGIH. Conclusions: Even though the manganese concentrations in blood of workers exposed to higher airborne manganese concentration were higher than among those exposed to lower concentrations, there was no difference in blood manganese concentrations among work duration. The data analyzed here by characterizing size-selective mass concentrations indicates that the inhaled manganese of welders in shipbuilding yards could be mostly manganese-containing respirable particle sizes.

• Journal of Environmental Health Sciences
• /
• v.33 no.4
• /
• pp.276-282
• /
• 2007

The purpose of this study is to assess the accurate state of the following: total welding fumes versus welding fumes in the air, respirable particulate mass, and exposure of dockyard welders to heavy metals. In addition, this study provides basic data for proposing improvements to create efficient and appropriate welding environments and to prevent occupational diseases. The subjects of this study were 94 laborers who worked at the block construction sites of large-scale dockyards located in Gyeongnam Province from March 2005 to June 2005. In order to collect samples on total welding fumes in the air and respirable particulate mass from the welders, Methods 0500 and 0600, established by the National Institute for Occupational Safety and Health (NIOSH), were used. The metals within the welding fumes were also analyzed using Inductively Coupled Plasma (ICP) under Method 7300 from NIOSH. The results of this research are summarized below. The geometric mean concentration of total welding fumes and that of respirable particulate mass were $4.11\;mg/m^3\;and\;3.53\;mg/m^3$, respectively. As a result of comparing the two measurement methods, there were significant differences (p<0.05) between the two groups for Ca, Cu, Cr, and Ni; however, there were no differences in Fe, Mg, Zn, Mg, Pb, and Cd. As a result of the analysis, the correlation between Mn and the concentration of heavy metals in the total welding fumes and respirable particulate mass was found to be -0.29, a significant negative correlation. The correlation between other heavy metals, however, was low. Finally, in the same total welding fumes, the correlation of Fe and Mg was high.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.5
• /
• pp.501-517
• /
• 2015

Objective: The aim of this study was to investigate the technology trend on developing helmets based on the analysis of Korean, US, European and PCT patents. Background: The usage of the personal protective equipment such as the safety helmet would be essential for preventing injuries and reducing the severity of injuries depending on the type of activity and the exposed environment. Method: Database of WIPSON was used for searching the patents. The objects were the Korean, US, European and PCT patents registered or opened from January 2011 to December 2014. The keyword to investigate was helmet, and International Patent Classification (IPC) was used for investigating the technology trend of the patents. Results: The cases of US patents annually increased, but the cases of European patents decreased. US patents belonged to all sections but Korean and European patents and PCT patents did not. The largest number of IPC, to which four areas' patents belonged, was 'Headwear' and the second largest one was 'Hygiene'. In the subgroup level, the most common largest subgroups were 'Parts, details or accessories of helmets' and 'Masks, shields, or hoods for welders'. Korean patents had the lowest ratio of single_IPC at 11%, but the ratios of single_IPC for US and European patents were 52%, respectively. 'Human necessities', 'Mechanical engineering', 'Physics', and 'Electricity' were used as a single_IPC, but lower levels of 'Performing operations', 'Chemistry', 'Textiles' and 'Fixed constructions' were used as multi_IPC. Most main applicants had patents which belonged to 'Human necessities'. Conclusion: The cases of US patents annually increased unlike others. The common technologies for creating the helmet were Parts of helmets under Headwear and Shields for welders under Hygiene. Many Korean patents tended to be categorized as multi_IPC, different from others. Application: To know the technological characteristic of patents would be helpful to initial stage developers.

• Safety and Health at Work
• /
• v.10 no.4
• /
• pp.518-526
• /
• 2019

Background: Additive manufacturing (AM) is a rapidly expanding new technology involving challenges to occupational health. Here, metal exposure in an AM facility with large-scale metallic component production was investigated during two consecutive years with preventive actions in between. Methods: Gravimetric analyzes measured airborne particle concentrations, and filters were analyzed for metal content. In addition, concentrations of airborne particles <300 nm were investigated. Particles from recycled powder were characterized. Biomonitoring of urine and dermal contamination among AM operators, office personnel, and welders was performed. Results: Total and inhalable dust levels were almost all below occupational exposure limits, but inductively coupled plasma mass spectrometry showed that AM operators had a significant increase in cobalt exposure compared with welders. Airborne particle concentrations (<300 nm) showed transient peaks in the AM facility but were lower than those of the welding facility. Particle characterization of recycled powder showed fragmentation and condensates enriched in volatile metals. Biomonitoring showed a nonsignificant increase in the level of metals in urine in AM operators. Dermal cobalt and a trend for increasing urine metals during Workweek Year 1, but not in Year 2, indicated reduced exposure after preventive actions. Conclusion: Gravimetric analyses showed low total and inhalable dust exposure in AM operators. However, transient emission of smaller particles constitutes exposure risks. Preventive actions implemented by the company reduced the workers' metal exposure despite unchanged emissions of particles, indicating a need for careful design and regulation of the AM environments. It also emphasizes the need for relevant exposure markers and biomonitoring of health risks.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.2
• /
• pp.114-123
• /
• 2005

We analyzed the demographic and job features of 197 shipyard workers with work-related musculoskeletal disorders(WMSDs) compensated by the Industrial Accident Compensation Insurance Act, and the features of the disorders, the causes of operation and the induced behaviors. The three shipbuilding companies surveyed were located in Busan Metropolitan city and Gyungsangnam-do. The results were as follows. 1. The ages of WMSDs patients in shipyard were $43.6{\pm}8.6$ and the job tenure was $14.3{\pm}5.6$. The 40's of them was 40.1%, and the 30's was 29.4%. Patients less than 5 year-work duration were 85.3%, and ones more than 16 year-work duration 6.6%. In occupations, welders were 32.5%, pre-welders 17.3%, and setting engineers 6.6%. 2. The causes of WMSDs in shipyard were works(95.4%) and outer crash or accident shock (3.6%). Based on the standard of the NIOSH induced behaviors, the causes were awkward posture (62.9%), excessive movement(19.3%) and repetitive movement(13.7%). 3. The compensated WMSDs by body part was the highest, 36%, in the spines, 32.0% in both the upper limbs and the spines, and 14% in the upper limbs. The number of cases of WMSDs in body were 96 in the cervical, 79 in the lumbar and 72 in the shoulders. 4. As a result of chi-square test(${\chi}^2$) between diagnosis and operation in body, welding and spot welding had the most diagnoses in all parts of the body among other occupations. Chi-square test(${\chi}^2$) between diagnosis and induced behavior in body showed that awkward postures recorded the highest rate and repetitive movements was the second. 5. The most hazardous occupation was the welding(incidence rate=9.7) and the most hazardous behavior was the awkward posture.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.107-115
• /
• 2012

This study incorporates welders and generators needed to use it and welder generators to be used as is to configure the system. Thus in order to propose an integrated system to prevent the rapid charging process to manage the power state information, system configuration is the most important. Therefore, the battery charging output port, the main input and output control ports, the generator control port, a warning alarm buzzer, UI switch input, EXT power output, check the battery status input, battery charge and discharge current, UI input control switch, generator status, the main power input and output, the output voltage, EXT warning output, DEBUG communication, UI display unit, an external input ADC units with a focus on generator control system was implemented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6282-6288
• /
• 2014

$CO_2$ welding is used widely in the field. On the other hand, welding defects occur when welders cannot adjust the current and voltage needed for welding and have to stop working to adjust the current and voltage, causing sudden cooling down of the welding structure inside a vehicle or tank where the control panel is invisible or when work site is far. This study used three types of existing $CO_2$ welders. This also applied SS400 rolled steel for welding structural purposes for remote control torch welding, perform a welding test through v-groove butt welding with a remote control torch and existing $CO_2$ welding torch, conducted visual inspection on the appearance of a welded top bead. In addition, the appearance quality of the welding part was monitored mainly through penetrant testing and a bending test to evaluate the welding defect reduction and the effect on the performance and compatibility by replacing the existing welder.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.201-204
• /
• 2018

We know that the piezoelectric constant d, the dielectric constant, and the electric-mechanical coupling coefficient affect the output for piezoelectric ceramics used in ultrasonic welders. Therefore, in this study, the characteristics of ceramics according to the changes of additives to the components of PZT-PMN-PZW were examined. When the addition amount of $MnO_2$ was 2 wt%, the most excellent properties were shown, which suggested the applicability as a material for fusion welding.

• 대한예방의학회:학술대회논문집
• /
• 1999.10a
• /
• pp.304-305
• /
• 1999

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.4
• /
• pp.384-394
• /
• 2002

In this paper, a new control strategy is proposed to improve the quality of the welding products. The conventional nonlinear power control system of spot welders is linearized using nonlinear feedback linearization technique based on differential geometry theory. An evolution strategy(ES) geometry is used to find optimal gain of PI controllers. It tries to find out the optimal control parameters by imitating the natural evolution. Some Simulation and experimental results show that the proposed variable power control system using ES algorithm has better dynamic performances than the conventional one.