• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.346-349
• /
• 2001

Nowadays the amount of plastic products is increasing in modern industry. Plastic materials are continuously developed to satisfy the mechanical, physical, and chemical properties. The increasing application of plastic parts in automobile and aerospace industries is due to the fact that it can reduce the structural weight and can lessen the environmental contamination. Among many manufacturing technologies for plastic parts, the injection molding process is very attractive because of its low cost and short production time. Through various analyses of resin flow and molding process for the conventional gate and cooling mechanism, a new type of mold was designed which had different gate location and cooling systems. Newly designed ball seat has an excellent performances, i.e. diminished weld-line, residual stress density, higher magnitude less crack propagation and smaller dimensional contractions effect.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.71-72
• /
• 2006

This paper introduces the results of the development of a new mobile Digital DC-arc Welding Machine (DDWM). A simple PI controller is applied to the DDWM to control the output welding current tracking the constant setting current. Furthermore, a hot-start function, an anti-stuck function, a standby mode and an intelligential circuit breaker (ICB) are included in the DDWM. The DDWM increases welding quality and saves more power energy than a conventional welding machine. Because the DDWM is changed from ready mode into the standby mode automatically after 2 minutes interval from this unload start. Then the DDWM is changed into ready mode automatically since it is reused to weld. Mover, the DDWM increases welding qualify, productivity and reduces costs of welding. So, the DDWM can have a great of contribution to the mobile welding industries. The effectiveness of the DDWM was proven by the experimental results and durable test.

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.1
• /
• pp.63-73
• /
• 1990

Low cost automatic welding machine is developed for the purpose of welding process automation of automobile parts with two dimensional welding joints. Developed gantry type machine is equipped with X, Y and roll axis stepping motors, and dirive units units are designed by two phase on drive scheme using shift registers. Control system is constructed by single board microcomputer of Z80A CPU, and also it is equipped with parallel input output ports and counter-timer chips. Linear and circular interpolation of welding head movement is accomplished by employing software digital differential analyzers. It has been shown that contour error of develped system is withi ${\pm}1.0mm$, meaning that the machine is suitable for CO2 arc welding process of automoble parts and is expected it's application to industry.

• Journal of Welding and Joining
• /
• v.20 no.4
• /
• pp.538-543
• /
• 2002

M/S TB(Mash Seam Tailored Blank) is a production method for blanks by welding together blanks of different material, thickness and coating, and is an attractive method for manufacturing car body because it makes parts lighter and can save the cost and time to manufacture. However, there have not been quantified criteria to evaluate the quality of TB weld. This study introduced FHR (failure height ratio) in order to assess formability or/and weldability of the M/S welds and the applicability of FHR was confirmed by actual auto body forming and FLD tests. Furthermore, a new parameter, HN(heat number) based on the heat input of "$Q=I^2Rt$" was proposed and assessed. It was found that the concept of HN could be utilized to evaluate the soundness of M/S welds without any destructive tests.ive tests.

• Proceedings of the KWS Conference
• /
• 2006.05a
• /
• pp.39-41
• /
• 2006

The weld quality of spacer grids in Pressurized Water Reactors(PWR) fuel is extremely important for the fuel assembly performance in the nuclear renter. The spacer grid welds are currently evaluated mainly by the metallographic examination although it reveals only cross-points which are welded by the laser beam. This experiment is also to compare the weldability of Zircaloy-4 spacer grids using by the GTA and laser beam. The effect of node geometries of spacer grids for GTAW and LBW has been studied and optimum conditions of spacer grid welding have been found. Microstructures and micro-hardness of GTA and laser beam welded zones have been also compared.

• Proceedings of the KWS Conference
• /
• 2006.05a
• /
• pp.42-44
• /
• 2006

A spacer grid assembly, which is an interconnected array of slotted grid straps and is welded at the intersections to form an egg crate structure, is one of the main structural components of the nuclear fuel assembly for pressurized water reactors(PWRs). The spacer grid assembly is structurally required to have enough buckling strength under various kinds of lateral loads acting on the nuclear fuel assembly so as to keep the nuclear fuel assembly straight. To meet this requirement, it is necessary to weld the welding parts carefully and precisely. In this study, a series of welding tests were carried out to find an optimum welding condition. After examining and analyzing the specimens welded from the welding conditions, a recommendable laser welding condition was selected for the KAERI designed Zircaloy spacer grid assembly.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.203-205
• /
• 2004

Welding sometimes should be done inside-hull after launching. The opposite side is contacted sea-water In this case, it should be a concern that the cooling rate expected very rapid may deteriorate microstructures, and hence these microstructures are hardened, cracking happens, or toughness would be impaired. Therefore, a test program simulating the situation has been planned and welded using the ship class materials (AH32, EH36) with the related welding consumables (E71Tl-1, E81Tl-K2) and then carried out to investigate the effect of cooling rate on weldments quality. Based on the test results, it could be concluded that the welds of which the opposite side of arc is exposed to wet or flowing water are not affected by rapid cooling.

• Journal of Welding and Joining
• /
• v.29 no.3
• /
• pp.70-75
• /
• 2011

Welding process generates distortion and residual stress in the weldment due to rapid heating and cooling. Welding distortion and residual stress in the welded structure result in many troubles such as dimensional inaccuracies in assembling and safety problem during service. The accurate prediction of welding residual stress is thus very important to improve the quality of weldment and find the way to reduce itself. This paper presents the simulation of welding-induced residual stress analysis to examine the cause of cracking in the SUS-overlay welding specimen at FPSO Moon Pool structure.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.29-31
• /
• 2007

In this paper we propose an directional analytic approach in image data space for X-ray image which is detected from the X-ray projection system. Such a radiographic nondestructive testing has long been used for steel-tube inspection and weld monitoring. The welded area and thickness of steel-tube are detected from gradient radiating mechanism based on the evaluation of biased X-ray source position. The welded area is an ellipse type on low contrast X-ray image including noise. Noise originates from most of elements of the system. such as shielding CCD camera, imaging screen, X-ray source, inspected object, electronic circuits and etc.. Projection incorrectness and noise influence on imaging quality is to be represented by vertical pixels' distribution. Space analysis due to vertical direction also shows the segmental possibility between regions by visual edge evaluation.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.32-34
• /
• 2007

The X-ray projection system has long been used for steel-tube inspection and weld monitoring. The thickness of tubes and welded areas is based on the evaluation of radiographic shadow projections. The traditional tangential measurement estimates the distance of border lines of the projected wall shadows of a tube onto a radiographic image detector. The detected image in which although there is a variety of noise may be sectioned into several partitions according to its specific blocks. Imaging noise originates from most of elements of the system, such as shielding CCD camera, imaging screen, X-ray source, inspected object, electronic circuits and etc. The tangential projection incorrectness and noise influence on imaging quality. In this paper we first sectionalize the X-ray image on the basis of vertical contrast difference. And next functional and statistic analysis are carried on at each region. Geometrical distance and unsharpness of the edge caused by visual evaluation uncertainties are also discussed.