• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.1
• /
• pp.47-54
• /
• 2019

This study proposes a new ERAM model with building population weighting. Previous studies of applying weightings on ERAM model on the scale of urban space were focused on the relationship between the street and the human behavior. However, this study focuses on the influences that buildings give to human behavior and develops a building population weighted ERAM model. This research starts by analyzing ERAM model to its basic compositions, which are adjacency matrix and row vector. It applies building population weighting to the row vector, while previous studies put weightings in the adjacency matrix. Building population weighted ERAM model calculates the building population weighting based on GIS data, which provides objective and massive data of buildings in the urban scale. For the verification of the model, Insa-dong and Myeong-dong were analyzed with both ERAM model and building population weighted ERAM model. The results were analyzed through the correlation test with actual pedestrian population data of the two districts. As a result, the explanation ability of building population weighted ERAM model for the pedestrian population turned out to be higher than the ERAM model. Since building population weighted ERAM model has the structure that can be combined with other weighted ERAM models, it is expected to develop a multi-weighted ERAM model with better explanation ability as a further study.

• The Journal of Korean Medicine
• /
• v.31 no.5
• /
• pp.41-59
• /
• 2010

Objective: Headache is one of the most common symptoms in primary medical care. The purpose of this study was to support medical treatment by consideration of a new CTTH (chronic tension-type headache) oriental medical diagnosis index. Methods: An Oriental medical diagnosis questionnaire was administered to a CTTH group, migraine group and normal group. The result was classified by using LDA, CART, factor diagnosis and tested in comparison with the original diagnosis. Also, weighting method based on expert opinions was done. Results: 1. The result analyzed by using LDA has an accuracy of 93.9% in comparison with the original diagnosis. 2. High accuracy showed when the test was performed with about 35 significant questions and four questions selected based on SPSS Wilks' lambda. 3. There was accuracy of 90.9% when differentiation was performed by using CART compared with original diagnosis. 4. 10 factors has a high initial value after factor analysis, consisting of questions to the similar differentiation. 5. Diagnosis formula of headache was made by using weighting method based on expert opinions. Conclusion: Oriental medical diagnosis questionnaires make it possible to classify headaches significantly. The study about weighting method of CTTH can make it possible to classify symptoms more accurately.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.5
• /
• pp.117-127
• /
• 2004

A risk analysis on the cutting slope of roads near Cheongju area was carried out with the data from geological map, field investigation, and laboratory test and with the Geographic Information System. A risk analysis method on the cutting slope of road using the Geographic Information System was developed with the data from geological map, field investigation and laboratory tests. In the GIS, road factors which are safety factor, class of road, slake index, slope-protection works, and height of slope in the cutting slopes are classified into some ranks, and their weighting factors were taken into account. This method can be applied effectively to a road management.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.991-993
• /
• 2003

The 4 sets of environmental variables dealing with meteorology, hydrology and physiography were analyzed to generate a spatial drought risk index of Phitsanulok province of Thailand. The analysis of K-mean and discriminant were applied to the set of the selective drought variables for grouping each of spatial variable set into 4 classes. The obtained 4 classes, based on group statistics, were thus recoded in the meaning of no risk, low risk, moderate risk, and high risk. The regression coefficient between recoded classes and a set of the selective environmental variables were then applied as spatial variable weighting on thematic dataset in GIS spatial analysis. The results showed that the weighting score of drought variable was highest in meteorological variable compared to other variables.

• Journal of Climate Change Research
• /
• v.4 no.4
• /
• pp.331-348
• /
• 2013

The frequency and intensity of abnormal climate caused by climate change is increasing in Korea. Also, the amount of damage from disaster is increasing rapidly. The research on vulnerability assessment analyzes environmentally, socially and economically vulnerable indicators and is ongoing to reduce the intensity of damage and establish adaptation policies for climate change. Therefore, in this study, we assessed vulnerability using weighting value derived by the regression equation. There are 3 evaluation items : vulnerability assessment for farmland erosion to flood, vulnerability assessment for health to heat wave, vulnerability assessment for forest fire to drought. For this study, indicators for each sectors were selected and spatial data for each sectors were established using GIS program. Results showed that vulnerability to heat wave was more affected by climate factors. On the other hand, vulnerability to flood and drought was more affected by social-economic factors. Then, to analysis efficiency of the regression analysis, vulnerability result was compared between the existing vulnerability research with no weighting applied and the vulnerability research with the influence of weighting value derived by the regression. This study showed that the regression analysis is efficient to provide practical and feasible alternatives in terms of planning climate change adaptation policies and it is expected to be utilized for vulnerability assessment in the future.

• Analytical Science and Technology
• /
• v.34 no.6
• /
• pp.241-250
• /
• 2021

Calibration curves are essential in quantitative methods and for improving the accuracy of analyte measurements in biological samples. In this study, a statistical analysis model built in the R language (The R Foundation for Statistical Computing) was used to identify a set of weighting factors and regression models based on a stepwise selection criteria. An LC-MS/MS method was used to detect the presence of urinary methamphetamine, amphetamine, and 11-nor-9-carboxy-Δ⁹ -tetrahydrocannabinol in a sample set. Weighting factors for the calibration curves were derived by calculating the heteroscedasticity of the measurements, where the presence of heteroscedasticity was determined via variance tests. The optimal regression model and weighting factor were chosen according to the sum of the absolute percentage relative error. Subsequently, the order of the regression model was calculated using a partial variance test. The proposed statistical analysis tool facilitated selection of the optimal calibration model and detection of methamphetamine, amphetamine, and 11-nor-9-carboxy-Δ⁹-tetrahydrocannabinol in urine. Thus, this study for the selection of weighting and the use of a complex regression equation may provide insights for linear and quadratic regressions in analytical and bioanalytical measurements.

• The Journal of Korean Academy of Prosthodontics
• /
• v.25 no.1
• /
• pp.71-94
• /
• 1987

This study was carried out to investigate the sound distortion following the alternation of the palatal plate thickness. For this study, 2 healthy male subjects (24-year-old) were selected. Born in Seoul, they both spoke Seoul dialect. First, their sounds of /na(나)/, /da(다)/, /1a(라)/, /ja(자)/, /cha(차)/, /ta(타)/, without inserting plates were recorded, and then the sounds with palatal plates of different thickness were recorded, successively. The plate was fabricated in 3 types, each palatal thickness being 1.0mm, 2.5mm, dentoalveolar portion 2.5mm, other residual portion was 1.0mm, successively. Each type plates named B, C, D-type, in succession. Series of analysis were administered through Computer(16 bit) to analyze the sound distortions. These experiments were analyzed by the LPC (without weighting, pre-weighting, post-weighting) of the consonants, vowels portion, formant frequency of the vowels and word duration of the consonants. The findings led to the following conclusions: 1. There was no correlation of the distortion rate on the 2 informants. 2. Generally, vowels were not affected by the palatal plate thickness in the formant analysis, however, more distortion was detected in the LPC analysis, especially C, D-type plates. 3. Consonants distortion was more evident in the C, D-type plate. 4. The second formant was most disturbed and reduced in the all consonants with insertion of the palatal plate, especially C, D-type plate. 5. Word duration was shortened in the plate inserted(except /ja/, /cha/), especially C, D-type. 6. It was found that dentoalveolar, hard palatal sounds were severely distorted in plate inserted, and they were mainly affected by the dentoalveolar portion thickness. 7. There was correlation between palatal thickness and consonants quality.

• Korean Journal of Remote Sensing
• /
• v.37 no.1
• /
• pp.97-110
• /
• 2021

Fog can cause large-scale human and economic damages, including traffic systems and agriculture. So, Korea Meteorological Administration is operating about 290 visibility meters to improve the observation level of fog. However, it is still insufficient to detect very localized fog. In this study, high-resolution grid-type visibility data were retrieved from irregularly distributed visibility data across the country. To this end, three objective analysis techniques (Inverse Distance Weighting (IDW), Ordinary Kriging (OK) and Universal Kriging (UK)) were used. To find the best method and parameters, sensitivity test was performed for the effective radius, power parameter and variogram model that affect the level of objective analysis. Also, the effect of data distribution characteristics (level of normality) on the performance level of objective analysis was evaluated. IDW showed a relatively high level of objective analysis in terms of bias, RMSE and correlation, and the performance is inversely proportional to the effective radius and power parameter. However, the two Krigings showed relatively low level of objective analysis, in particular, greatly weakened the variability of the variables, although the level of output was different depending on the variogram model used. As the level of objective analysis is greatly influenced by the distribution characteristics of data, power, and models used, care should be taken when selecting objective analysis techniques and parameters.

• Journal of KSNVE
• /
• v.7 no.1
• /
• pp.143-152
• /
• 1997

This paper introduces experimental results of the ride qulaity characteristics of automotive seats fixed on the vibration table that is noving simultaneously to the three-axis in a similar way to the real running condition. Vibration experiment was carried out for five different automotive seats and four Korean individuals. The assessment of the ride quality characteristics for each seat and indiviual was made not only from the analysis of vibration measurements but also from the evaluation of weighied vibration signals, which were obtained using the frequency weighting function and the multiplication factor dependent on the position and axis of vibration exposure to wehole-body. The usefulness of those assessment results in analysis of the ride quality of seats is discussed and their limitation is also pointed out in this paper.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.237-239
• /
• 2003

The present study investigates on design optimization of rib-roughened two-dimensional channel to enhance turbulent heat transfer. Response surface method with Reynolds-averaged Navier-Stokes analysis is used as an optimization technique. Standard $k-{\varepsilon}$model with wall functions is adopted as a turbulence closure. The objective function is defined as a linear combination of heat transfer and friction drag coefficients with weighting factor. Computational results for overall heat transfer rate show good agreements with experimental data. Four design variables are optimized for weighting factor of 0.02.