• Steel and Composite Structures
• /
• 제17권5호
• /
• pp.705-719
• /
• 2014

Composite steel-concrete box girders are frequently used in bridge construction for their economic and structural advantages. An integrated metaheuristic based optimization procedure is proposed for discrete size optimization of straight multi-span steel box girders with the objective of minimizing the self-weight of girder. The metaheuristic algorithm of choice is the Cuckoo Search (CS) algorithm. The optimum design of a box girder is characterized by geometry, serviceability and ultimate limit states specified by the American Association of State Highway and Transportation Officials (AASHTO). Size optimization of a practical design example investigates the efficiency of this optimization approach and leads to around 15% of saving in material.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.537-539
• /
• 2015

considerate operation is a major issue in the equipment-intensive operation. Identifying an optimal equipment combination is important to achieve low-energy operations. An Earthwork operation planning system, which measures the energy consumption of construction operations by taking into account construction equipments' engineering attributes (e.g., weight, capacity, energy consumption rate, etc.) and operation conditions (e.g., road condition, attributes of materials to be moved, geometric information, etc.), is essential to achieve the low-energy consumption. This study develops an automated computerized system which identifies an optimal earthmoving equipment fleet minimizing the energy consumption. The system imports a standard template of earthmoving operation model and compares numerous scenarios using alternative equipment allocation plans. It finds the fleet that minimizes the energy consumption by enumerating all cases using sensitivity analysis. A case study is presented to verify the validity of the system.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.45-46
• /
• 2023

CLC is used as a filling material for many buildings, and according to energy saving design standards, CLC also requires insulation performance. However, it shows lower insulation performance compared to organic insulation, so additional research is needed. Therefore, in this study, the insulation properties of CLC were analyzed by incorporating EPS beads with high insulation performance into CLC. In this experiment, EPS beads and blast furnace slag were replaced, and W/B was fixed at 33%. The EPS Bead mixing ratio was divided into 5 levels: 0, 0.5, 1.0, 1.5, 2.0 (%), and the experimental items were measured for apparent density and thermal conductivity. As a result of the experiment, the apparent density and thermal conductivity tended to decrease as the mixing ratio of EPS beads increased. It is judged that the density decreased due to the low density and the micropores inside, and the thermal conductivity also decreased.

• Journal of Electrical Engineering and Technology
• /
• 제1권2호
• /
• pp.216-225
• /
• 2006

This paper presents a new circuit topology of DC busline switch and snubbing capacitor-assisted full-bridge soft-switching PWM inverter type DC-DC power converter with a high frequency link for low voltage large current applications as DC feeding systems, telecommunication power plants, automotive DC bus converters, plasma generator, electro plating plants, fuel cell interfaced power conditioner and arc welding power supplies. The proposed power converter circuit is based upon a voltage source-fed H type full-bridge high frequency PWM inverter with a high frequency transformer link. The conventional type high frequency inverter circuit is modified by adding a single power semiconductor switching device in series with DC rail and snubbing lossless capacitor in parallel with the inverter bridge legs. All the active power switches in the full-bridge inverter arms and DC busline can achieve ZVS/ZVT turn-off and ZCS turn-on commutation operation. Therefore, the total switching losses at turn-off and turn-on switching transitions of these power semiconductor devices can be reduced even in the high switching frequency bands ranging from 20 kHz to 100 kHz. The switching frequency of this DC-DC power converter using IGBT power modules is selected to be 60 kHz. It is proved experimentally by the power loss analysis that the more the switching frequency increases, the more the proposed DC-DC converter can achieve high performance, lighter in weight, lower power losses and miniaturization in size as compared to the conventional hard switching one. The principle of operation, operation modes, practical and inherent effectiveness of this novel DC-DC power converter topology is proved for a low voltage and large current DC-DC power supplies of arc welder applications in industry.

• 원예과학기술지
• /
• 제33권3호
• /
• pp.349-355
• /
• 2015

Lisianthus (Eustoma grandiflorum) is relatively sensitive to temperature and light conditions. For year round production of good quality potted plants and energy saving, it is necessary to understand the growth and flowering response to the combined conditions of these environmental factors. This study was conducted to examine the growth and flowering responses to temperature, photoperiod, and light intensity during the post-seedling stage. 'El Paso Deep Blue' lisianthus plants with four true leaf pairs were grown in growth chambers maintained at average daily temperatures (ADT) of 14, 20, and $26^{\circ}C$ and provided with three photosynthetic photon fluxes [PPF; 100, 200, and $400{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$] for 8 (08:00-16:00) and 16 hours (08:00-24:00) by fluorescent and incandescent lamps, resulting in four daily light integrals (DLI): about 3, 6 (two photoperiods), 12 (two photoperiods), and $24mol{\cdot}m^{-2}{\cdot}d^{-1}$. After treatment for three weeks followed by growth for one week in a greenhouse of $20{\pm}3^{\circ}C$, growth and development were measured. Higher temperature, higher PPF, and longer photoperiod promoted plant growth and flowering; however the impacts of PPF and photoperiod were smaller than those of temperature. As ADT and DLI increased, the number of leaves, number of flowers, lateral shoot length, and shoot dry weight increased. An increase of about $1mol{\cdot}m^{-2}{\cdot}d^{-1}$ DLI could constitute an increase of 0.40 to $0.76^{\circ}C$ ADT depending on these crop characteristics when ADT and DLI are above $20^{\circ}C$ and $12mol{\cdot}m^{-2}{\cdot}d^{-1}$, respectively. Therefore, growers can select a regimen of heating or supplemental lighting without delaying harvesting time or decreasing crop quality.

• 한국지역사회생활과학회지
• /
• 제24권4호
• /
• pp.583-589
• /
• 2013

This study was to provide the information for optimum utilization of the air-conditioning system in the human health and energy saving perspective. Subjects were 17 male and female college students(7 males and 10 females) with normal weight. They wore a short sleeved shirt, knee length trousers, socks, and underwear(0.4clo). They were asked to choose the preferred temperature from different environmental temperatures($28^{\circ}C$, $25^{\circ}C$). The physiological responses were measured and the subjective sensation was voted during the step changes of environmental temperature, starting at $28^{\circ}C$ to $25^{\circ}C$ with $1^{\circ}C$ decrease every 20 minutes. The preferred temperature was $25.9{\pm}0.4^{\circ}C$ for males and $26.9{\pm}0.2^{\circ}C$ for females at $28^{\circ}C$ and $24.8{\pm}0.6^{\circ}C$ for males and $25.6{\pm}0.1^{\circ}C$ for females at $25^{\circ}C$. The preferred temperature decreased about $1.3^{\circ}C$ while the environmental temperature changed $3^{\circ}C$. During the environmental step changes, mean skin temperature decreased more in females while the oxygen uptake and rectal temperature were kept constant for both males and females. We found the preferred temperature was affected by the exposed temperature and the thermal sensation in the condition. Subjects preferred a lower environmental temperature when they were exposed to a lower temperature with cooler sensation. Therefore, in the perspective of human health and energy saving, it is recommended to start setting the air-conditioning temperature higher than the preferred temperature.

• 한국정밀공학회지
• /
• 제29권8호
• /
• pp.896-905
• /
• 2012

Recently, the application of the plastic material to automotive components and structures has steadily increased to satisfy demands on the saving of overall weight and the improvement of energy efficiency. The objective of this paper is to investigate the development of a bumper back-beam using a thermoplastic olefin (TPO). The bumper back-beam was designed to be manufactured from the injection molding process. In order to obtain a proper design of the bumper back-beam, three-dimensional finite element analyses were performed for various design alternatives. Stress-strain curves for different strain rates were measured by high speed tensile tests of the TPO to consider strain rate effects in the FEA. The influence of the sectional shape and the rib formation on the contact force-intrusion curves, the deflection and the energy absorption rate of the bumper back-beam was examined. From the results of the examination, a proper design of the bumper back-beam was acquired. The bumper back-beam consisting of TPO was fabricated from the injection moulding process and the vibration welding. Pendulum crash tests were carried out using the fabricated bumper back-beam. The results of the tests showed that the designed bumper back-beam can satisfy requirements of the federal motor vehicle safety standard (FMVSS). Through the comparison of the previously designed bumper back-beam with the newly designed bumper back beam, it was noted that the weight of the designed bumper back-beam is lighter than that of the previously designed bumper back beam by nearly 16 %. In addition, it was considered that the newly designed bumper back beam can improve recycling of the bumper back-beam.

• Composites Research
• /
• 제24권4호
• /
• pp.17-22
• /
• 2011

본 연구에서는, 복합재 샌드위치를 수중운동체용 구조물에 적용하기 위한 기초연구로서, 샌드위치 복합재 원통의 제작, 좌굴 해석 및 시험 방법, 중량저감 효과를 분석하였다. 우선 변재에 주름이 생기지 않도록 하는 2단계 샌드위치 제작 방법을 소개하고, 이를 사용하여 원통을 제작하여 수압시험을 수행하였다. 동시에 MSC Nastran의 셀요소와 고체요소를 사용한 유한 요소해석을 수행하여 시험결과와 비교하였다. 시험과 해석의 결과 비교로부터 선형 유한요소해석으로도 샌드위치 원통의 좌굴압력을 3% 내외의 오차로 정확히 예측할 수 있음을 확인하였다. 또한 필라멘트 와인딩 원통에 대한 인자연구를 통해 샌드위치를 사용할 경우 동일한 지지압력에서 필라멘트 와인딩 원통보다 최소 30% 이상 무게가 줄어드는 것을 확인하였다.

• 한국산학기술학회논문지
• /
• 제14권10호
• /
• pp.4713-4718
• /
• 2013

플라스틱 사출성형은 원재료를 한 번의 가공으로 최종 제품을 만들 수 있는 장점을 가지고 있다. 사출성형을 위해서는 금형의 설치, 플라스틱 수지의 용융, 용융수지의 사출, 성형품의 취출 등을 위하여 사출성형기는 반드시 필요하다. 사출성형기는 여러 가지 방법으로 구분되는데, 본 연구는 현재 국내 A사에서 생산되고 있는 토글식 사출성형기를 대상으로 한다. 연구내용으로는 사출성형기의 여러 부품 및 주요한 플레이트에 대하여 3차원 모델링을 실시하고, 3차원 캐드상에서 조립하여 사출성형기의 전체 구조를 파악하였다. 그리고 에너지 및 생산비 절감을 위하여 주요 플레이트에 대하여 유한요소법을 이용하여 사출압력과 형체력 적용시의 플레이트에 발생하는 스트레스와 변위를 분석하고, 그 결과를 토대로 플레이트를 개선하였다. 개선된 플레이트를 대상으로 유한요소 재해석을 통하여 고정플레이트는 약 2.7%, 이동 플레이트는 약 3.5%, 테일 스톡은 약 6.9%의 중량 감소 결과를 확인하였다.

• 한국작물학회지
• /
• 제48권2호
• /
• pp.73-80
• /
• 2003

An experiment was carried out at the Field Laboratory of the Department of Crop Botany, Bangladesh Agricultural University, Mymensingh from March to July, 2001 to investigate the effect of biofertilizers on morpho-physiological characters of okra. The experiment was laid out in a randomized complete block design with four replications. There were nine treatments such as $\textrm{T}_0$ (control), $\textrm{T}_1$ (Azotobacter biofertilizer), $\textrm{T}_2$ (Azospirillum biofertilizer), $\textrm{T}_3$ (Azotobacter+Azospirillum biofertilizers), $\textrm{T}_4$ (Azotobacter+Cowdung 5 ton $\textrm{ha}^{-1}$), $\textrm{T}_5$ (Azospirillum+Cowdung 5 ton $\textrm{ha}^{-1}$), $\textrm{T}_6$(Azotobacter+Azospirillum+Cowdung 5 ton $\textrm{ha}^{-1}$), $\textrm{T}_7$ (Cowdung 5 ton $\textrm{ha}^{-1}$) and $\textrm{T}_8$ (60% Nitrogen). The experimental results revealed that significant variations exist among the treatments regarding morphological characters e.g. plant height, number of leaves/plant, stem base diameter, tap root length, and physiological characters like, root dry weight, leaf area index and crop growth rate. Number of leaves/plant, stem base diameter, root length, root dry weight, leaf area index and crop growth rate were found higher in $\textrm{T}_4$, $\textrm{T}_5$, $\textrm{T}_6$ and $\textrm{T}_8$ than the others. In all the parameters, $\textrm{T}_8$ gave the similar result with biofertilizers in combination with cowdung treatments and $\textrm{T}_7$ showed identical with $\textrm{T}_0$ (control). Biofertilizer treatments had insignificant effect on 1000-seed weight(g). Experimental results mentioned above revealed that morpho-physioligical characters of okra could be modified by the application of biofertilizer+cowdung. However, biofertilizers+Cowdung treatments were comparable to $\textrm{T}_8$(60% Nitrogen) in this study. This suggests that $\textrm{T}_4$ or $\textrm{T}_6$ or $\textrm{T}_5$ were more benificial in environmentally friendly okra cultivation and may be used as an alternative of inorganic nitrogen by saving cost of production and sustaining productivity.