• Korea-Australia Rheology Journal
• /
• 제16권4호
• /
• pp.163-168
• /
• 2004

In this study, an ultrasonic technique was employed to obtain pressure-volume-temperature (PVT) rela­tionship of polymer melt by measuring ultrasonic velocities under various temperatures and pressures. The proposed technique was applied to on-line monitoring of injection molding process as an attempt to predict quality of molded parts. From the comparison based on Tait equation, it was confirmed that the PVT behav­ior of a polymer is well described by the variation of ultrasonic velocities measured within the polymer medium. In addition, the changes in part weight and moduli were successfully predicted by combining the data collected from ultrasonic technique and artificial neural network algorithm. The results found from this study suggest that the proposed technique can be effectively utilized to monitor the evolution of solid­ification within the mold by measuring ultrasonic responses of various polymers during injection molding process. Such data are expected to provide a critical basis for the accurate prediction of final performance of molded parts.

• Fisheries and Aquatic Sciences
• /
• 제25권10호
• /
• pp.525-536
• /
• 2022

Photosynthetic bacteria (PSB) attract considerable interest as useful microorganisms; nevertheless, a generalized culture technique has not been previously reported owing to difficulty in their cultivation. Therefore, a simple culture technique suitable for public use was investigated. Among the PSB tested, the strain Rhodobacter azotoformans EBN-7 was the most suitable for scale-up production because it showed the highest specific growth rate (0.20 h^-1) on basal medium. In scale-up cultivation (500 L), R. azotoformans EBN-7 showed 4.50 × 10¹⁰ colony-forming units mL^-1 (number of viable cells), dry cell weight of 26.8 g/L, and a specific growth rate of 0.15 h^-1. Cultivation using this final culture broth (as seed culture) in a 15 L simple reactor was successful, with maintenance of cell activity evident. For use as seed culture, the maximum allowable preservation period of R. azotoformans EBN-7 at 4℃ was 3 months. When R. azotoformans EBN-7 cultivated in a simple technique was applied to shrimp aquaculture water, NH₄⁺-N was reduced from 0.61 mg/L to 0.24 mg/L (by 60.7%) in 4 days in comparison with the control. Thus, this simple culture technique using R. azotoformans EBN-7 has the potential for a good removal efficiency of NH₄⁺-N, making seed culture easier and suitable for public use.

• 한국전문물리치료학회지
• /
• 제14권4호
• /
• pp.1-6
• /
• 2007

This study examined the effects of hold-relax with agonist contraction (HR-AC) on the symptoms of delayed onset muscle soreness (DOMS) induced by intensive eccentric exercise of the non-dominant biceps brachii. Ten men (mean age=26.7 yrs, mean height=172.1 cm, mean weight=66.2 kg) and ten women (mean age=27.4 yrs, mean height=165.9 cm, mean weight=60.7 kg) who had not participated in a regular exercise program for the upper extremities in the previous six months were randomly assigned to one of two experimental groups: the HR-AC group, or the control group. We measured joint range of motion (ROM), maximal voluntary isometric contraction (MVIC), and muscle soreness before eccentric exercise, and 24, 48, and 72 hours after eccentric exercise. The subjects in the HR-AC group received the HR-AC technique in the non-dominant biceps brachii. The HR-AC technique was applied 24 and 48 hours after eccentric exercise. There was no significant difference between the HR-AC and the control group. However, the HR-AC group, compared to the control group, had a significant difference between the time points of the various parameters. Increased ROM (p<.05), decreased muscle soreness (p<.05), and reduced MVIC (p<.05) were found in the HR-AC group after 72 hours. Decreased ROM (p<.05) and MVIC (p<.05), and increased muscle soreness (p<.05) were observed in the control group. These findings suggest that the HR-AC technique effectively reduces muscle soreness and increases ROM 72 hours after eccentric exercise.

• 한국임상수의학회지
• /
• 제34권4호
• /
• pp.287-290
• /
• 2017

A 6-month-old, 4.1 kg female Dachshund dog presented with intermittent non-weight bearing lameness of the right thoracic limb. Radiographs revealed caudolateral luxation of the right radial head and a shortened right ulna compared to the contralateral limb. Bone lengthening by distraction of the ulna using the Ilizarov technique was performed following ulnar osteotomy. The rate of distraction was 1.5 mm per day, adjusted a total of 3 times daily for a total distraction distance of 10 mm. The Ilizarov fixator was removed four weeks after surgery. The patient showed knuckling due to radial nerve injury that occurred during limb-lengthening. Corrective osteotomy was performed using a plate and pin for the luxation and deformity of the right radial head. The luxation of the radial head was successfully reduced following surgery. However, the knuckling persisted after surgery. Rehabilitation for radial nerve injury was performed using heat therapy, massage, a passive range of motion exercises, water treadmill exercises, neuromuscular electrical stimulation, leash-walking, and acupuncture. 15 months after surgery, the patient showed satisfactory weight-bearing ambulation without recurrence of lameness. The use of the Ilizarov technique is a good surgical option for the treatment of a patient with congenital elbow luxation.

• 대한토목학회논문집
• /
• 제26권4A호
• /
• pp.677-687
• /
• 2006

크리깅 보간법은 지구통계학 분야에 주로 사용되는 보간법의 하나이다. 이 방법은 실험적 베리오그램과 이론적 베리오그램의 작성과 크리깅 보간법의 정식화에 관한 연구를 포함하고 있다. 종래의 응력복구를 위한 최소제곱법과 대조적으로, 가우스적분점에서의 응력데이타로부터 준정해를 얻기 위해 가중 최소제곱법에 기초를 둔다. 즉, 동일한 가중치를 사용하는 종래의 방식들과는 달리 가우스적분점에서의 응력값의 보간을 위하여 베리오그램 모델링을 통한 가중치가 결정된다. 한편, 분할된 요소망에 Zienkiewicz와 Zhu에 의해 제안된 SPR기법에 기초를 둔 사후오차평가를 통해 p-차수를 균등 또는 선택적으로 증가시키는 자동체눈 방식이 도입되었다. 이 방법의 정당성을 보기위해 인장력을 받는 개구부를 갖는 평판문제를 해석하였다. 또한, 기존의 최소제곱법과의 비교를 통한 크리깅보간법의 정당성을 보여 주었다.

• 한국강구조학회 논문집
• /
• 제18권2호
• /
• pp.213-223
• /
• 2006

전통적인 트러스 구조물의 최적화 기법은 종종 복잡하고 많은 계산과정이 요구되면서 정작 아주 간단한 중량최소화와 같은 경비문제를 다루고 있다. 또한 이러한 기법들은 복잡하고 종종 다목적함수인 실 경비함수를 갖는 트러스 구조물에 적용 시 만족할만한 결과를 보이지 못한다. 따라서 본 연구에서는 구조물의 중량뿐만 아니라 사용되는 제품 종류의 수와 트러스 구조물의 연결의 수 및 기타현장소요경비로 구성되어지는 실제 요구되는 경비함수를 가지는 트러스 구조물의 최적화문제에, 전체 트러스 구조물의 부재를 같은 치수의 제품을 가질 수 있는 몇 가지 종류의 부재들로 변별화하는 클러스터링 기법(Clustering Technique)을 도입하여 설계를 효율적으로 수행하고자 한다. 클러스터링 기법을 이용하여 사용되는 부재들을 그룹별로 변별하고 최적 해에 근접한 해를 찾은 후 간단한 타부 탐색기법을 이용하여 최종 최적해를 얻는다. 수치 예로써 실 경비함수를 갖는 트러스 구조 모형에 적용하여 최적설계를 시도하고 또한 중량최소화문제에도 적용하여 휴리스틱 기법(Heuristic Techniques)의 대표적인 유전알고리즘을 이용한 기존 연구의 중량최소화 설계결과와 비교 한다. 그 결과, 본 연구의 알고리즘은 실 경비함수를 가지는 트러스 구조물의 설계에 있어서 경제성이 있는 결과를 나타내며, 또한 기존연구의 알고리즘 보다 효율적임을 나타내었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.387-392
• /
• 2005

Double-deck train have studied in the next generation train in KRRI. Double-deck train have more seat capacities compared with single deck vehicles and is a efficient, reliable and comfortable alternative train. Because of heavy weight, weight minimization of double-deck train carbody is imperative to reduce cost and extend life-time of train. Weight minimization problem of the double-deck train car-body is required to decide 66 design variables of thicknesses for large aluminum extruded panel while satisfying stress constraints. Design variables are too many and one execution of structural analysis of double-deck train carbody is time-consuming. Therefore, we adopt approximation technique to save computational cost of optimization process. Metamodels such as response surface model (RSM) and kriging model are used to approximate model-based optimization is described. RSM is easy to obtain and expressed explicit function, but this is not suitable for highly nonlinear and large scaled problems. Kriging model employs an interpolation scheme and is developed in the fields of spatial statistics and geostatistics. Target of this design is to find optimum thickness of AEP to minimize weight of doulbe-deck train carbody. In this study, meta model techniques are introduced to carry out weight minimization of a double-deck train car-body.

• 한국항공우주학회지
• /
• 제31권9호
• /
• pp.9-17
• /
• 2003

본 논문에서는 내장형 밸런스에 가해지는 모형중량성분의 보상을 위해 초기하중의 전이를 고려한 weight tare 계산방안을 제시하였다. 만약, 이러한 초기하중의 영향을 고려하지 않고 공력하중 데이터에 밸런스 교정관계식을 그대로 적용한다면 공력하중 전체에 걸쳐서 오차가 발생하게 된다. 본 계산방안의 신뢰성 검증을 위해 계산중량과 실측중량간의 비교 평가와 초기하중의 영향에 대한 평가를 수행하였다.

• 한국멀티미디어학회논문지
• /
• 제22권11호
• /
• pp.1313-1323
• /
• 2019

With the development of the Internet and the increase of smart phones, various services considering user convenience are increasing, so that users can check news in real time anytime and anywhere. However, online news is categorized by media and category, and it provides only a few related search terms, making it difficult to find related news related to keywords. In order to solve this problem, we propose a method to recommend related documents more accurately by applying Doc2Vec similarity to the specific keywords of news articles and weighting the title and contents of news articles. We collect news articles from Naver politics category by web crawling in Java environment, preprocess them, extract topics using LDA modeling, and find similarities using Doc2Vec. To supplement Doc2Vec, we apply TF-IDF to obtain TC(Title Contents) weights for the title and contents of news articles. Then we combine Doc2Vec similarity and TC weight to generate TC weight-similarity and evaluate the similarity between words using PMI technique to confirm the keyword association.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.147-149
• /
• 2005

On this study, we optimized maximizing thrust force of weight ratio and minimizing detent force of weight ratio at the TFLM(Transverse Flux Linear Motor) using design of experiments by the table of orthogonal array, characteristic function and analysis of means(ANOM), For two functions or more, the effectiveness of design change can be evaluated in accordance with change in design parameters. Also, The stator and mover weight of TFLM is reduced by up to 20 percent while its thrust force of weight ratio and detent force of weight improved. From now on, we are going to apply the required technique to design various uses and shares of the TFLM.