• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.475-480
• /
• 2009

These studies were carried out to find the effect of packing materials and storage temperature to enhance the storability of Salicornia europaea. The fresh weight loss was less than 2% at below $10^{\circ}C$ and non-perforated package, but $25^{\circ}C$ and perforated package treatment showed more than 4% of fresh weight loss that result to deteriorate quality. The carbon dioxide and oxygen contents remained 1~2% and above 15% in non-perforated package, and these contents were in proportion to gas permeability of packing materials. All the temperature treatments except 25c showed rapidly increasing ethylene concent from 7days after storage, and the highest ethylene content was $2^{\circ}C$ treatment that should appear chilling injury. The off-odor and deterioration ratio were lowest in $5^{\circ}C$ among the temperature treatments and $50{\mu}m$ thickness ceramic film treatment at $5^{\circ}C$ storage, while packing materials did not show any trends among the temperature treatments. The shelf life based on visual quality showed highest in $50{\ss}|$ thickness ceramic film packing and $5^{\circ}C$ treatment, and that was 28days.

• Journal of Bio-Environment Control
• /
• v.25 no.2
• /
• pp.118-122
• /
• 2016

This study was conducted to identify the effects of 1-MCP and the storage methods for maintaining the quality of asparagus spears. Asparagus spears treated 1-MCP stored in MA condition and perforated film (conventional condition) and 1-MCP non-treated used as control. The treated asparagus was stored at $4^{\circ}C$ for 40 days. The fresh weight loss rate was less than 0.2% in all MA (Modified atmosphere) storage treatments, including the 1-MCP treatment, and 1-MCP shown the less fresh weight loss rate in perforated film storage after 20 days storage. The carbon dioxide concentration within a package was 5-12% in MA storage, which is whith the tolerated range of maximum $CO_2$ content of asparagus spears in recommended CA or MA conditions. The oxygen content was maintained between 5 to 15% in MAP treatments. The ethylene content was lowest at the MA storage with 1-MCP treatment. Visual quality, off-flavor, soluble solid contents, and hue angle on the final storage day were higher in MA storage and the 1-MCP treatment and conventional MA storage did not show any significant differences. These results suggest that the 1-MCP treatment did not significantly affected the quality and storability of asparagus spears.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.527-534
• /
• 2017

The purpose of this study is to develop unmanned equipment that can automatically move to the desired point and measure water quality at the correct depth. For this purpose, we constructed a water sampling lift and water sampling container, an unmanned vessel equipped with a VRS-GPS, an acoustic echo sounder, and a water quality sensor. Also, we developed an automatic navigation algorithm and program, an automatic water sampling program, and a water quality map generation program. As a result of the experiment in the detention pond, the unmanned vessel sailed along the planned route with an accuracy of about 93% within the error range of 3m. In addition, the water quality sensor installed in the lift was able to acquire the water quality of the target area in real time and transmit it to the server via wireless Internet, and it was possible to monitor the water quality of each site in real time. Through field experiments, the water sampling lift was able to control the desired length with an accuracy of about 94%. The stretch length accuracy experiment of the water sampling lift was impossible to measure directly in the water, so it was replaced land-based experiment. We also found some unstable problems due to the weight of the water sampling lift and the weight of the air compressor to operate the water container. Except these two problems, we accomplished purpose of this study. An automated water quality measurement method using an unmanned vessel can be used to measure the quality of water in a difficult to access area and to secure the safety of the worker.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.2
• /
• pp.109-126
• /
• 2015

Because fault gouge developed at the center of fault is recognized as one of the most important weak sites, it is evident that clay mineralogy and physical properties greatly affect the rock stability. The purpose of this study is to establish the relationship of mineralogy and physical factors that control rock stability in fault zones. We analyzed a total of 51 samples from 16 main faults which were selected from a Korea fracture map, using XRD, SEM, and physical analyses like unit weight, friction and cohesion properties. Though it is considered that the most common clay minerals comprising fault gouge are kaolinite, illite and smectite, clay mineralogy slightly varies depending on lithology: illite > smectite > kaolinite and chlorite in volcanic rocks, kaolinite and chlorite > illite > smectite in sedimentary rocks, and illite > smectite > kaolinite and chlorite in abundance, respectively. Friction angle decreases with increasing clay content. Cohesion increases with increasing clay content below the 45 % region while it decreases with increasing clay content at the region higher than 45%, with some scatters in the data. It is likely that these results are ascribed to the physical heterogeneity of fault gouges with varying content of different clay minerals.

• The Journal of the Korea Contents Association
• /
• v.19 no.1
• /
• pp.404-412
• /
• 2019

The purpose of this study is to develop the usability evaluation contents based on the needs of different stakeholder's related to the usability of the product, and to derive the design direction and apply it as the evaluation standard by applying the product design based on the results. I created a stakeholder map for a fire detector product and identified stakeholders related to usability. Based on 3 factors(Physical, cognitive, emotional) of the usability evaluation, I conducted survey on the building users and the building managers who have different requirements. There are 12 directions (ease of installation, durability, maintainability, additional functionality, effectiveness, attractiveness, visibility, consistency of information, environmental harmony, consistency, Image suitability, reliability). Through weighted analysis of three usability evaluation factors, I found factors were ranked in the same order of importance, but they were different in importance figure. Based on the results of the survey, overall product usability aspects were improved but effectiveness and environmental coordination aspects needed to be improved.

• 한국체육학회지인문사회과학편
• /
• v.55 no.6
• /
• pp.661-676
• /
• 2016

The purpose of this study is to draw a systematic access method of career intervention for dance majors. This study conducted Delphi survey and Analytic Hierarchy Process(AHP). As a result of study, 16 elements of career intervention were produced in total 4 areas. Results show that vocational guidance puts emphasis on the understanding of the various vocations, career education on the career planning and goal, career counseling on the macro-narrative to the life and career intervention network on the dance job fair and workshop. In the complex weight of all factors, ratings of weight show that dance vocation guidance and career education are demanded significantly. Results show that expansion of career alternatives, application of diversified dance career development road map to the curriculum, development of test tool and outcome standard, dance educators' systematic career intervention education and systematization of network for career support were suggested as measures for dance career intervention. This study discussed about dynamic reality and systematic access method for dance majors based on theories of Holland(1997), Super(1990), and Savickas(2005).

• Horticultural Science & Technology
• /
• v.32 no.5
• /
• pp.655-665
• /
• 2014

The effect of modified atmosphere packaging (MAP) on kohlrabi (Brassica olerace L. gongulodes group)'s quality and antioxidant molecule during storage was examined to determine the optimal film package for maintaining freshness. To extend shelf life, MAP was tested using PE $50{\mu}m$ and oriented polypropylene (OPP) films with oxygen transmission rate (OTR) at 3,000, 10,000, $15,000mL/m^2/day/atm$. The OPP film packaging with modified oxygen transmission rate showed a delay in a weight loss and extended storage period. The package with OTR 3000 attained the desired gas composition of $O_2$ 3.2-6.7 kPa and $CO_2$ 13.1-19.8 kPa, in storage at room temperature. Kohlrabi stored in this package showed the lowest weight loss and the highest visual quality. Deterioration and off-odor were developed more rapidly in PE $50{\mu}m$ towards the end of the storage at room temperature. However, there are no differences among OTR films in visual quality and off-odor until 60 days at cold storage. Vitamin C content of kohlrabi was reduced rapidly in OTR 15000 with high transmission rate and showed less loss in PE $50{\mu}m$ and OTR 3000 in both room temperatures and cold storage. Results revealed that an OPP film with OTR 3000 extended the shelf life of kohlrabi in storage with maintained quality and vitamin C.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.2
• /
• pp.87-94
• /
• 2023

Fresh bakery products are widely consumed worldwide and therefore particular requirements for their quality characteristics have been established. The shelf life of bakery products is mainly subjected to microbial spoilage and staling. This study investigated the optimum conditions of modified atmosphere packaging (MAP) application to extend the shelf life of the bakery products. The gas conditions of the headspace in 'Baumkuchen' cake were 0, 30, 70, and 100% CO₂ concentrations and stored at 30℃ for 5 days. The bakery samples were evaluated weight loss, hardness, color change, pH and total aerobic bacteria, yeast and molds count throughout the storage period. Values of the weight loss and hardness were increased over the storage period, meanwhile pH was significantly decreased. However, no significant color changes were observed during storage. It was also found no significant difference between the different gas treatments. Total aerobic bacteria count of the stored samples after day 5 was increased by 6.94 log CFU/g in the air filled package, compared to 6.20 log CFU/g in the 100% CO₂ filled package and 6.02 log CFU/g in the 70% CO₂ filled package. Yeast and molds count were 3.65 log CFU/g in air filled package, 2.66 log CFU/g in 100% CO₂ filled package, 2.64 log CFU/g in 70% CO₂ filled package, 2.86 log CFU/g in 30% CO₂ filled package and 3.31 log CFU/g in 100% N₂ filled package on day 2. In conclusion, it was shown that 70% and 100% CO₂ treatments in the package were effective to reduce microbial growth.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.4
• /
• pp.100-118
• /
• 2015

This study established a land-cover classification method on objects using satellite images, and figured out distributional patterns of land cover according to categories through spatial statistics techniques. Object-based classification generated each land cover classification map by spectral information, texture information, and the combination of the two. Through assessment of accuracy, we selected optimum land cover classification map. Also, to figure out spatial distribution pattern of land cover according to categories, we analyzed hot spots and quantified them. Optimal weight for an object-based classification has been selected as the Scale 52, Shape 0.4, Color 0.6, Compactness 0.5, Smoothness 0.5. In case of using the combination of spectral information and texture information, the land cover classification map showed the best overall classification accuracy. Particularly in case of dry fields, protected cultivation, and bare lands, the accuracy has increased about 12 percent more than when we used only spectral information. Forest, paddy fields, transportation facilities, grasslands, dry fields, bare lands, buildings, water and protected cultivation in order of the higher area ratio of DMZ according to categories. Particularly, dry field sand transportation facilities in Yanggu occurred mainly in north areas of the civilian control line. dry fields in Cheorwon, forest and transportation facilities in Inje fulfilled actively in south areas of the civilian control line. In case of distributional patterns according to categories, hot spot of paddy fields, dry fields and protected cultivation, which is related to agriculture, was distributed intensively in plains of Yanggu and in basin areas of Cheorwon. Hot spot areas of bare lands, waters, buildings and roads have similar distribution patterns with hot spot areas related to agriculture, while hot spot areas of bare lands, water, buildings and roads have different distributional patterns with hot spot areas of forest and grasslands.

• Journal of Bio-Environment Control
• /
• v.20 no.2
• /
• pp.150-155
• /
• 2011

The aim of this study was investigated long distance export condition of paprika from Korea to Canada, and evaluated the effect of non-perforated breathable films on the storability of paprika during MA storage in the simulated long distance export condition. The long distance export condition of paprika from Korea to Canada was $7{\pm}1^{\circ}C$ and RH 90% during shipping for 20 days, and then the temperature of that was increased to $13^{\circ}C$ for 3 hours during transferring from refrigerated container to storage room in Canada, and decreased $3{\sim}4^{\circ}C$ for 3 days before distributing to local markets. The temperature and relative humidity of local markets was $16^{\circ}C$ and 60%, respectively. The packing material treatments were non-packing, as control, perforated film (6 mm diameter hole, $18holes/m^2$), and 3 kind of laser treated non-perforated films (oxygen transmission rate was 5,000, 20,000 and 100,000 $cc/m^2{\cdot}day{\cdot}atm$). Under the simulated long distance export condition; $7^{\circ}C$ and RH 90% for 15 days and then $20^{\circ}C$ and RH 55% for 7 days, the fresh weight loss of paprika was less than 1% in 3 kind of laser treated non-perforated film treatments but was more than 4% in control and perforated film treatment that showed severe deterioration of visual quality after 20 days of storage. The atmosphere of paprika packages was changed 5% oxygen and 15% carbon dioxide in 5,000 $cc/m^2{\cdot}day{\cdot}atm$ treatment, and 16% oxygen and 4~5% carbon dioxide in 20,000 $cc/m^2{\cdot}day{\cdot}atm$ treatment during room temperature storage after cold storage for 15 days. A carbon dioxide concentration of these 2 treatments was exceeded the optimal MA and CA condition. There was no significant difference in ethylene concentration among 3 kind of laser treated non-perforated film treatments. A paprika packed with 100,000 $cc/m^2{\cdot}day{\cdot}atm$ non-perforated film showed the highest visual quality under the simulated long distance export condition. However, the firmness and soluble solids did not show any significant difference among 3 kind of laser treated non-perforated film treatments. Therefore, we may suggest that 100,000 $cc/m^2{\cdot}day{\cdot}atm$ laser treated non-perforated film was the proper film for MAP of paprika under long distance export condition that was $7{\pm}1^{\circ}C$ and RH 90% for 15 days, and then $20^{\circ}C$ and RH 55% for 7 days.